Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
TireRack
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection


Reply
 
Thread Tools
Old 09-29-2019, 04:01 PM   #1
Cheap Guy
 
Cheap Guy's Avatar
 
Drives: 2011 Camaro SS
Join Date: Nov 2017
Location: Southeast Michigan
Posts: 356
Trying new detail techniques

I spent the last few days detailing my cars. I’m an old school guy so I wanted to try working with relatively new methods.

First I tried using a cheap Walmart foam gun to do the initial wash. Basically you get what you pay for - it made very little suds even with a lot of wash. Since I was going to do a full detail with clay I wasn’t that concerned about how effective it was but I did follow up with the normal two bucket method. I ordered the Gilmore foam gun for future use and hopefully that one will work a lot better, especially based on the reviews.

(Got the Gilmore foam gun today. As always, you what you pay for. This thing is a solid tool and actually only cost about $20 more than the Walmart junk.) As the saying goes, “Buy cheap, buy twice!”

Next thing was using synthetic clay. It took some getting used to but it proved its worth when I accidentally dropped it. With real clay I would have basically ruined the bar but with the Groit’s synthetic clay I just rinsed it off and kept going. It also was a lot quicker without the need for folding the clay constantly.

I also wanted to experiment with different detail products. For the compounding and polishing I decided to try Meguiar’s Mirror Glaze line, which is supposedly for more experienced detailers, on one car and Meguiar’s Ultimate line on the other. The results were very good on both but the Ultimate was definitely easier to work with.

For the waxing part, again I used Meguiar’s products but I wanted to try using liquid wax instead of paste which I’ve used for years. I tried applying the wax with my Harbor Freight DA polisher, which I also used for the compounding and polishing. While I was ok with liquid, I didn’t think the machine did as well a job as applying it by hand. Liquid is definitely easier to apply and remove than paste.

I used HF pads versus the better Groit’s pads. Again, you get what you pay for. I basically had to use two HF pads for every Groit’s so the cost savings was negated and the Groit’s is still good to go.

Overall I’m very satisfied with the results and learned a few new time saving techniques. As is always the case, you get what you pay for when it comes to some products.
Attached Images
   
__________________
My Little Mid-Life Crisis Cure!

First - 1997 Camaro 3800 Y87, M5, Green - Long Gone | Second - 1997 LT1 Z28, M6, Silver - Sold | Third - 1999 LS1 Z28, M6, Pewter, Almost Stock! - Sold and Missed
Current - 2011 Camaro SS, M6, black, 1LE suspension parts

Last edited by Cheap Guy; 09-30-2019 at 04:09 PM.
Cheap Guy is offline   Reply With Quote
Old 09-30-2019, 06:51 AM   #2
Shawn1244
 
Shawn1244's Avatar
 
Drives: 2010 Chevrolet Camaro LT
Join Date: Sep 2019
Location: USA
Posts: 2
Great work!

I use polishing pads Lake Country, I bought it ones and never change my mind, their products are great.
__________________
Shawn1244 is offline   Reply With Quote
Old 09-30-2019, 04:11 PM   #3
Cheap Guy
 
Cheap Guy's Avatar
 
Drives: 2011 Camaro SS
Join Date: Nov 2017
Location: Southeast Michigan
Posts: 356
Quote:
Originally Posted by Shawn1244 View Post
Great work!

I use polishing pads Lake Country, I bought it ones and never change my mind, their products are great.
Thanks! I figured there had to be a better source of good but economical pads.
__________________
My Little Mid-Life Crisis Cure!

First - 1997 Camaro 3800 Y87, M5, Green - Long Gone | Second - 1997 LT1 Z28, M6, Silver - Sold | Third - 1999 LS1 Z28, M6, Pewter, Almost Stock! - Sold and Missed
Current - 2011 Camaro SS, M6, black, 1LE suspension parts
Cheap Guy is offline   Reply With Quote
Old 10-01-2019, 04:25 AM   #4
DonM
This is my 3rd Camaro
 
DonM's Avatar
 
Drives: All black '13 LS-M6 / Darth Camaro
Join Date: Dec 2015
Location: NE Ohio (Akron)
Posts: 896
I use a Porter Cable DA polisher with Meguiar's thin pads & get great results. If you're going to stick with OTC products, you should seriously give the Turtle Wax ICE line of products a look, QUALITY and effective!

Check out my post: "A Turtle Wax Detail" to see what the Clean Finish Polishing Compound and Seal N Shine can do to a neglected finish - NOT a Camaro, but I mention my Camaro in the post so it's cool LOL
__________________
Don M

DonM is offline   Reply With Quote
Old Yesterday, 08:11 AM   #5
jokrz187
 
jokrz187's Avatar
 
Drives: 2015 1SS
Join Date: Jun 2017
Location: Woodbridge, VA
Posts: 234
what a great review, i appreciate it.
__________________

MODS: VARARAM CAI, Catch Can, 1 LE front/rear sway bars, engine cover/fuse box custom painted, strut bar, Texas Speed LT, Hi Flo Cats, Magnum Tru-X pipe, NGK Spark Plugs, PCM Spark Plug Wire, Painted Calipers, CF Spoiler w/wicker bill.
jokrz187 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:20 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.