09-20-2018, 09:20 AM | #1 |
Drives: 14 2SS/RS Triple Black Ragtop LS3 Join Date: Mar 2014
Location: California Bay Area 95008
Posts: 305
|
SS Brembo Caliper torque
I've searched and searched to find the proper torque for the rear caliper mounting bolts. Many different answers available online so I bought a Haynes manual.
Haynes states the torque for both front and rear are the same. 30# the 90º TTY If anyone has better info please advise. Please and thanks in advance. -Elonkay Nika
__________________
Come see the violence inherent in the sysadmin.
|
09-20-2018, 10:24 AM | #2 |
Drives: 2014 Camaro LS / 13 zl1 Join Date: May 2016
Location: Hayes , Va.
Posts: 368
|
https://www.camaro5.com/forums/showt...torque+brembos 7th post down
|
09-20-2018, 11:07 AM | #3 |
Drives: 14 2SS/RS Triple Black Ragtop LS3 Join Date: Mar 2014
Location: California Bay Area 95008
Posts: 305
|
Thanks SC,
I'll move forward with this . . . -Elonkay Nika
__________________
Come see the violence inherent in the sysadmin.
|
09-20-2018, 09:15 PM | #4 |
Drives: 2014 Camaro 1SS Join Date: Jun 2010
Location: MA
Posts: 103
|
The link above says all caliper bolts are 30 lb ft + 90deg which is not correct. The fronts are 44 lb ft + 90deg.
__________________
2014 1SS - BTR Stg3, GMPP CNC Heads, Kooks LTs & cats, Magnaflow 2.5" Street w/Res X, Z28 CAI
|
11-21-2018, 02:38 PM | #5 |
Drives: Rally Yellow 2012 2SS Join Date: Jan 2015
Location: Wagener , South Carolina
Posts: 68
|
Are these specs for a 2012 SS also
|
11-21-2018, 08:02 PM | #6 |
Drives: 2014 Camaro 1SS Join Date: Jun 2010
Location: MA
Posts: 103
|
The image above is from the 2010-2011 Service Manual.
__________________
2014 1SS - BTR Stg3, GMPP CNC Heads, Kooks LTs & cats, Magnaflow 2.5" Street w/Res X, Z28 CAI
|
|
|
|
|