Jacksonville Camaro Club - Page 206 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

68 Z/28 · 04-03-2011, 04:58 PM

Quote:

Originally Posted by Lycanine

Hey guys sorry I missed it...my friends took me out for my birthday, and well, I wasn't able to do much of anything until about now lol.

You didn't miss much , it really sucked this year , sorry I told you all about it , it was much better last year , again sorry guys

chevyguy_72 · 04-03-2011, 05:03 PM

Quote:

Originally Posted by KillerV

hey headed to test and tune weds night after work let me know if anyone here wants to roll down and take on the grocery getter

Grocery Getter? Really? Since when is a CTS-V a grocery getter?

dcarlos55 · 04-03-2011, 05:06 PM

Got my headers and exhaust installed this weekend. Had to fire it up in the driveway with nothing but the headers in it. Made me firm.

Then I had to wake up from the wet dream and put the rest of the exhaust in. It sounds so much better even with the stock mufflers. I did paint them flat black while they were out though so at least they aren't shining out from under the back of the car.

Next come the Borla S-type mufflers and I'm done for a while. Gotta save my pennies up for springs, bushings and other suspension goodies.

steeleshark2 · 04-03-2011, 05:09 PM

Sweet, cannot wait to hear the ride!!

Imsykogrl · 04-03-2011, 07:42 PM

Quote:

Originally Posted by KillerV

hey headed to test and tune weds night after work let me know if anyone here wants to roll down and take on the grocery getter

I wouldn't say you're a grocery getter, but I know for a FACT that you will race anyone with a car seat in the back ;-)

jntjohnson · 04-04-2011, 08:42 AM

Hi everyone,
New to these forums, I own a 2011 SS Inferno Orange. I live in Kingsland Ga.
I believe I do know steeleshark2, Me and my wife ran into you at the car wash by Win dixie.

jntjohnson · 04-04-2011, 08:48 AM

I just dropped off the Camaro at Sun Coast Creations so they could use it to fabricate a new body kit as well as some other goodies. So now the 3 to 4 month long wait begins until I get the beast back. I am trying to find sponsorships for the car for once the kit is completed, hoping to find a twin turbo kit. I might just have to dig deep for the money on that.

steeleshark2 · 04-04-2011, 10:58 AM

Well, my ride is back home from EFI Alchemy. Here is a vid of it!!

dcarlos55 · 04-04-2011, 11:05 AM

Quote:

Originally Posted by steeleshark2

Well, my ride is back home from EFI Alchemy.

Sweeeeeet.

larryt1026 · 04-04-2011, 11:33 AM

Quote:

Originally Posted by SURPRYZ

Have you called EFI?

Does EFI work on exhausts?

KillerV · 04-04-2011, 11:39 AM

Quote:

Originally Posted by Imsykogrl

I wouldn't say you're a grocery getter, but I know for a FACT that you will race anyone with a car seat in the back ;-)

thats part of catching a sucker to run down not to mention the stroller and drag radials in the trunk lol

steeleshark2 · 04-04-2011, 12:03 PM

Quote:

Originally Posted by larryt1026

Does EFI work on exhausts?

Yes they do!! They installed my DT catback system.

thespymaster · 04-04-2011, 12:15 PM

Quote:

Originally Posted by larryt1026

Does EFI work on exhausts?

Save some coin, and just goto RainBow Mufflers, they installed the Borla Atak system on V1

steeleshark2 · 04-04-2011, 02:15 PM

Quote:

Originally Posted by thespymaster

Save some coin, and just goto RainBow Mufflers, they installed the Borla Atak system on V1

True that!!

04-03-2011, 05:06 PM	#2873
dcarlos55 Drives: 2017 HBM A10 ZL1 Join Date: Feb 2011 Location: Jacksonville FL Posts: 1,205	Got my headers and exhaust installed this weekend. Had to fire it up in the driveway with nothing but the headers in it. Made me firm. Then I had to wake up from the wet dream and put the rest of the exhaust in. It sounds so much better even with the stock mufflers. I did paint them flat black while they were out though so at least they aren't shining out from under the back of the car. Next come the Borla S-type mufflers and I'm done for a while. Gotta save my pennies up for springs, bushings and other suspension goodies. __________________ My build thread http://www.camaro5.com/forums/showthread.php?t=224342 Go is good. Stop is better.

04-03-2011, 05:09 PM	#2874
steeleshark2 Drives: 2010 Transformer 1SS Camaro Join Date: Nov 2009 Location: Kingsland, Ga Posts: 2,553 View My Garage	Sweet, cannot wait to hear the ride!! __________________ Build page:http://www.camaro5.com/forums/showth...77#post3083477

04-04-2011, 10:58 AM	#2878
steeleshark2 Drives: 2010 Transformer 1SS Camaro Join Date: Nov 2009 Location: Kingsland, Ga Posts: 2,553 View My Garage	Well, my ride is back home from EFI Alchemy. Here is a vid of it!! __________________ Build page:http://www.camaro5.com/forums/showth...77#post3083477

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Cosmetics and Lighting Modification Discussions	36	04-02-2020 05:32 PM
Gran Turismo 5... No Camaro?	5thGenOwner	5th Gen Camaro SS LS LT General Discussions	111	12-06-2011 10:06 AM
Think about this and the Z28 5th gen	13F20	Camaro ZL1 Forum - ZL1 Specific Topics	41	09-04-2010 12:59 AM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM

04-04-2011, 08:42 AM	#2876
jntjohnson Drives: 2011 SS CAMARO Join Date: Mar 2011 Location: Jax, FL. Posts: 172	Hi everyone, New to these forums, I own a 2011 SS Inferno Orange. I live in Kingsland Ga. I believe I do know steeleshark2, Me and my wife ran into you at the car wash by Win dixie.

04-04-2011, 08:48 AM	#2877
jntjohnson Drives: 2011 SS CAMARO Join Date: Mar 2011 Location: Jax, FL. Posts: 172	I just dropped off the Camaro at Sun Coast Creations so they could use it to fabricate a new body kit as well as some other goodies. So now the 3 to 4 month long wait begins until I get the beast back. I am trying to find sponsorships for the car for once the kit is completed, hoping to find a twin turbo kit. I might just have to dig deep for the money on that.