12-18-2018, 12:53 PM | #743 |
CAR-DASHIAN
Drives: 2015 Ashen Gray Metallic 2SS/RS L99 Join Date: Nov 2015
Location: Gilbert, AZ
Posts: 540
|
L99 Custom Grind Cam
FBO, 3200 Stall, Heads milled .020, 91 octane
__________________
PERFORMANCE: ColdAirInductions CAI, ADM Race Scoop, Cordes Performance Racing Ported TB/IM/Custom VVT Cam, WFO Milled Heads, Stainless Power 1 7/8" LT/3" HFCs, JBA 3" Comp. Cat-Back, Taylor 10.4mm Plug Wires, Tim King Performance Stage 3 6L80, Circle D Billet 3600 Stall, Nic D ECM/TCM Tune, - 458rwhp/413rwtq (prior to PIM), Forgestar F14 (F)18" / (R)17" Rims.
SUSPENSION: Z/28 Rear UCA Bushings, Carlyle Racing LCA/TA, BMR Adj. Toe Rods/Xtreme Anti-Roll Bar, Justice Pete Castor Locks/Radius Rod Inserts, Pegasus Billet Rear Cradle Bushings, Mickey Thompson Street SS II 305/45/17 tires. Last edited by PostNup; 12-18-2018 at 02:49 PM. |
12-18-2018, 01:59 PM | #744 |
Drives: 2010 Camaro 2SS Join Date: Mar 2018
Location: Pensacola, FL
Posts: 268
|
Thats Healthy!
|
12-18-2018, 02:08 PM | #745 |
CAR-DASHIAN
Drives: 2015 Ashen Gray Metallic 2SS/RS L99 Join Date: Nov 2015
Location: Gilbert, AZ
Posts: 540
|
Thanks!! Was supposed to port the intake manifold while it was all apart, but the porter couldn't get to it. Going back for that in a few weeks.
His ported intakes have shown an avg. increase of 14rwhp/18rwtq on Heads/Cam cars. My heads aren't ported but I did have them mill 20 thousandths off to bump my compression a little. Can't let the LS3 guys have all the fun
__________________
PERFORMANCE: ColdAirInductions CAI, ADM Race Scoop, Cordes Performance Racing Ported TB/IM/Custom VVT Cam, WFO Milled Heads, Stainless Power 1 7/8" LT/3" HFCs, JBA 3" Comp. Cat-Back, Taylor 10.4mm Plug Wires, Tim King Performance Stage 3 6L80, Circle D Billet 3600 Stall, Nic D ECM/TCM Tune, - 458rwhp/413rwtq (prior to PIM), Forgestar F14 (F)18" / (R)17" Rims.
SUSPENSION: Z/28 Rear UCA Bushings, Carlyle Racing LCA/TA, BMR Adj. Toe Rods/Xtreme Anti-Roll Bar, Justice Pete Castor Locks/Radius Rod Inserts, Pegasus Billet Rear Cradle Bushings, Mickey Thompson Street SS II 305/45/17 tires. |
12-18-2018, 02:23 PM | #746 | |
Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014
Location: Yorba Linda, California
Posts: 1,564
|
Quote:
That’s pretty good power! Why is the torque so much lower than the hp though?
__________________
YouTube:Krisprz garage
Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez |
|
12-18-2018, 02:27 PM | #747 |
CAR-DASHIAN
Drives: 2015 Ashen Gray Metallic 2SS/RS L99 Join Date: Nov 2015
Location: Gilbert, AZ
Posts: 540
|
I honestly do not know. Might have something to do with the converter
__________________
PERFORMANCE: ColdAirInductions CAI, ADM Race Scoop, Cordes Performance Racing Ported TB/IM/Custom VVT Cam, WFO Milled Heads, Stainless Power 1 7/8" LT/3" HFCs, JBA 3" Comp. Cat-Back, Taylor 10.4mm Plug Wires, Tim King Performance Stage 3 6L80, Circle D Billet 3600 Stall, Nic D ECM/TCM Tune, - 458rwhp/413rwtq (prior to PIM), Forgestar F14 (F)18" / (R)17" Rims.
SUSPENSION: Z/28 Rear UCA Bushings, Carlyle Racing LCA/TA, BMR Adj. Toe Rods/Xtreme Anti-Roll Bar, Justice Pete Castor Locks/Radius Rod Inserts, Pegasus Billet Rear Cradle Bushings, Mickey Thompson Street SS II 305/45/17 tires. |
12-18-2018, 02:30 PM | #748 | |
Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014
Location: Yorba Linda, California
Posts: 1,564
|
Quote:
Yeah that could be why
__________________
YouTube:Krisprz garage
Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez |
|
12-18-2018, 05:27 PM | #749 |
USA-1
|
How's it drive with the stall?
__________________
"A Camaro in the garage is safe, but that's not what Camaros are built for..."
R2C CAI / Apex Scoop / VMAX Ported TB / Speed Engineering LTHs / X-pipe / GPI port/rod-mod intake manifold / Circle D 3200 278mm Converter / 3.91 gears / DynoSteve tuned / 1LE Shocks/Struts/Toe Links / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Tranny Dipstick / 2012+ Heater Hose / 2013+ Rearview Mirror / Fuel rail flip / Drake shifter / Oil Cooler Delete |
12-18-2018, 06:04 PM | #750 |
CAR-DASHIAN
Drives: 2015 Ashen Gray Metallic 2SS/RS L99 Join Date: Nov 2015
Location: Gilbert, AZ
Posts: 540
|
Good. Still gonna tweak it a little, bump the idle speed up a touch. It pushes a little - for this size cam I should have gone with a 3600-3800.
__________________
PERFORMANCE: ColdAirInductions CAI, ADM Race Scoop, Cordes Performance Racing Ported TB/IM/Custom VVT Cam, WFO Milled Heads, Stainless Power 1 7/8" LT/3" HFCs, JBA 3" Comp. Cat-Back, Taylor 10.4mm Plug Wires, Tim King Performance Stage 3 6L80, Circle D Billet 3600 Stall, Nic D ECM/TCM Tune, - 458rwhp/413rwtq (prior to PIM), Forgestar F14 (F)18" / (R)17" Rims.
SUSPENSION: Z/28 Rear UCA Bushings, Carlyle Racing LCA/TA, BMR Adj. Toe Rods/Xtreme Anti-Roll Bar, Justice Pete Castor Locks/Radius Rod Inserts, Pegasus Billet Rear Cradle Bushings, Mickey Thompson Street SS II 305/45/17 tires. |
12-18-2018, 06:13 PM | #751 |
Drives: Camaro Join Date: Oct 2018
Location: Alabama
Posts: 673
|
My first stall was a 3200 but once I changed out to 4K it was perfect. Now rockin a circle d 3e, around 5k stall
|
12-18-2018, 06:17 PM | #752 |
CAR-DASHIAN
Drives: 2015 Ashen Gray Metallic 2SS/RS L99 Join Date: Nov 2015
Location: Gilbert, AZ
Posts: 540
|
Goals
__________________
PERFORMANCE: ColdAirInductions CAI, ADM Race Scoop, Cordes Performance Racing Ported TB/IM/Custom VVT Cam, WFO Milled Heads, Stainless Power 1 7/8" LT/3" HFCs, JBA 3" Comp. Cat-Back, Taylor 10.4mm Plug Wires, Tim King Performance Stage 3 6L80, Circle D Billet 3600 Stall, Nic D ECM/TCM Tune, - 458rwhp/413rwtq (prior to PIM), Forgestar F14 (F)18" / (R)17" Rims.
SUSPENSION: Z/28 Rear UCA Bushings, Carlyle Racing LCA/TA, BMR Adj. Toe Rods/Xtreme Anti-Roll Bar, Justice Pete Castor Locks/Radius Rod Inserts, Pegasus Billet Rear Cradle Bushings, Mickey Thompson Street SS II 305/45/17 tires. |
12-21-2018, 12:34 PM | #753 |
Drives: jjj Join Date: Dec 2018
Location: kkk
Posts: 99
|
can someone help me read this? I see a change at 4300rpm, I was told by the shop that it was a rattle on the exhaust that caused it. also was told by another shop that it was running lean, I have the dsx flex ready to be programmed on the car too.
|
01-16-2019, 03:31 PM | #754 | |
Drives: 2010 Camaro 454 LSX (SOLD) Join Date: Jun 2013
Location: Dearborn Heights, MI
Posts: 792
|
Here was a dyno video of cam and head package we did that picked up 100 hp
|
|
02-02-2019, 06:15 AM | #755 | |
This was the last time i got tuned, I had installed my 1-7/8" Kooks Headers and went to get custom tuned. (it is at this moment at the shop again getting a BTR Stage 3 Cam and Flex Fuel System installed, so she'll be on the dyno again next week)
|
||
08-09-2019, 01:11 PM | #756 | |
Drives: '23 LT1 A10 Join Date: Oct 2015
Location: Austin Texas
Posts: 986
|
Quote:
Totally agree with this statement. I just did a stage 2.5 cam (229/248), vvt/dod delete and made 428 hp. I have a 3.91 and 3200 Circle D TC. Was hoping for better numbers but it was over 105F inside the shop, but the car pulls way stronger than before the cam.
__________________
24 LT1 M6 Sharkskin Metallic
Last edited by havelegs; 08-16-2019 at 09:08 AM. |
|
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
L99 Love | Mod4SS | 5th Gen Camaro SS LS LT General Discussions | 95 | 02-14-2015 07:51 PM |
Dyno Dynamics AWD Dyno @ Hennessey Performance | Hennessey Performance | USA - Texas | 0 | 08-08-2009 10:03 AM |
LS3 Tune Only Results .. Also stock LS3 vs. L99 dyno graph | LPFSTheFett | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 5 | 08-05-2009 07:04 AM |
Tuning LS3 vs L99 | Evilangel | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 17 | 10-30-2008 10:22 AM |
L99 engine specifications | Tran | Wiki | 0 | 10-19-2008 11:40 AM |