My 2SS - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2SSRS@Gen5diy · 07-24-2009, 04:36 PM

So today i start the redesign on the Clutch Fluid reservoir to fix the mix of brake and Clutch Fluid, I am not to happy to see this in our camaro's and not on any C6 out there or G8's, So i want down to my GM parts Dealer and did some home work, We looked at C6 and G8 put the problem with them is that you can not buy the reservoir by its self only with the Clutch master slender, So he is also a FORD dealer and we found a Clutch Fluid reservoir from a F-150 or F-250 that had the mounting hardware to mount on the car but it WAS A FORD (And it was also $65 that is to mach on that part) And this is a Camaro, Than i said how a about a GTO so he looks it up and it has the reservoir by its self so he looks up the $ for the part and it only list's for $19.33 for one and i get a better price, Lats say lower than $15.00 for me, And because this is a GTO the part is a Holden LTD part and maid in Germany, This will fix two things.

#1 No more mixing of brake and Clutch Fluid, And i will go to Dot 4 on the Clutch Fluid.

#2 no way to contaminant you brake Fluid from you Clutch Fluid, And than you do not have to pay to rebuild you ABS in 3-5 years If you drive it as a DD

So her is a pic of the reservoir,

2SSRS@Gen5diy · 07-24-2009, 06:14 PM

So i did it in less than 1 1/2 hour had to get a hose clamp and a rubber plug for the brake master cylinder and 2 self tapping metal screws for the new reservoir.

2SSRS@Gen5diy · 07-25-2009, 07:21 PM

So after doing this to my car i test drove it to Las Vegas and back home that was 260 Mi and no more leak on top of the Brake Fluid reservoir so i think that i fixed it.

2SSRS@Gen5diy · 08-18-2009, 10:35 AM

See this for new upper 1/2 of hurst shifter.
http://www.camaro5.com/forums/showth...d=1#post812293

2SSRS@Gen5diy · 08-20-2009, 09:04 PM

As of today i got the go ahead to say that i will be 1 of 6 test mulls for Vararam, I am out in AZ, So will update as soon as i have the unit some time next week, We will post on the install and how easy it is and the improvement to the car maybe some new dyno's will see.

2SSRS@Gen5diy · 08-28-2009, 05:49 PM

Her you go this is a link to my Vararam test on the new CAI.
http://www.camaro5.com/forums/showth...431#post857431

Some new info for you guys the 2 units are not the same in some ways as of 11-16-09 it looks as the non tune unit will be 2.5-2.75" tall filter on a small 92 MM diameter TBS mating point, And the tune unit is for a large C.I. motor at least 427 and up as it can flow 2000 CFM and more it comes with a 3" filter and a 102 MM diameter TBS mating point and more to come soon.

2SSRS@Gen5diy · 08-28-2009, 09:15 PM

So this week i put on my Xa coilovers and this is some of the pics of that work and of the car after the alignment,

2SSRS@Gen5diy · 09-02-2009, 11:34 AM

Got my ARH back from the coating shop, I will put it on in 30 days or so, I have to complete my testing for Vararam first.

But i hope you like the pics.

And at the same time put on the MSD wires.

Hope you like it.

2SSRS@Gen5diy · 09-06-2009, 10:32 AM

So her is some of the pics from how to do the ABL lighting in the dash.

Rygain · 09-06-2009, 02:31 PM

whohooo

Great job dude !!

2SSRS@Gen5diy · 09-06-2009, 10:09 PM

Quote:

Originally Posted by Rygain

whohooo

Great job dude !!

Congrats you will love your Camaro send me pic after you get it.

2SSRS@Gen5diy · 09-23-2009, 09:32 PM

So for the last 2 months i have called and e-mailed Revolution AKA Tommy Z to get his hood and front and the rear spoilers and the grill and SS emblems

And i got this today.

2SSRS@Gen5diy · 10-15-2009, 01:44 PM

I put on the G8 Pedal covers to day.

And this is the part numbers.
you will need one of this #92213647 and for the M6 two of this #92173105 hope this helps you out.

To see pics go to this link.
http://www.camaro5.com/forums/showpo...9&postcount=62

anthonybyram · 10-15-2009, 01:57 PM

Thats gonna look killer!

07-24-2009, 04:36 PM	#15
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	So today i start the redesign on the Clutch Fluid reservoir to fix the mix of brake and Clutch Fluid, I am not to happy to see this in our camaro's and not on any C6 out there or G8's, So i want down to my GM parts Dealer and did some home work, We looked at C6 and G8 put the problem with them is that you can not buy the reservoir by its self only with the Clutch master slender, So he is also a FORD dealer and we found a Clutch Fluid reservoir from a F-150 or F-250 that had the mounting hardware to mount on the car but it WAS A FORD (And it was also $65 that is to mach on that part) And this is a Camaro, Than i said how a about a GTO so he looks it up and it has the reservoir by its self so he looks up the $ for the part and it only list's for $19.33 for one and i get a better price, Lats say lower than $15.00 for me, And because this is a GTO the part is a Holden LTD part and maid in Germany, This will fix two things. #1 No more mixing of brake and Clutch Fluid, And i will go to Dot 4 on the Clutch Fluid. #2 no way to contaminant you brake Fluid from you Clutch Fluid, And than you do not have to pay to rebuild you ABS in 3-5 years If you drive it as a DD So her is a pic of the reservoir, Attached Images

07-24-2009, 06:14 PM	#16
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	So i did it in less than 1 1/2 hour had to get a hose clamp and a rubber plug for the brake master cylinder and 2 self tapping metal screws for the new reservoir. Attached Images

08-28-2009, 05:49 PM	#20
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Her you go this is a link to my Vararam test on the new CAI. http://www.camaro5.com/forums/showth...431#post857431 Some new info for you guys the 2 units are not the same in some ways as of 11-16-09 it looks as the non tune unit will be 2.5-2.75" tall filter on a small 92 MM diameter TBS mating point, And the tune unit is for a large C.I. motor at least 427 and up as it can flow 2000 CFM and more it comes with a 3" filter and a 102 MM diameter TBS mating point and more to come soon. Last edited by 2SSRS@Gen5diy; 11-16-2009 at 10:48 PM. Reason: update.

08-28-2009, 09:15 PM	#21
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	So this week i put on my Xa coilovers and this is some of the pics of that work and of the car after the alignment, Attached Images Last edited by 2SSRS@Gen5diy; 09-13-2009 at 01:31 PM.

09-06-2009, 10:32 AM	#23
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	So her is some of the pics from how to do the ABL lighting in the dash. Attached Images

07-25-2009, 07:21 PM	#17
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	So after doing this to my car i test drove it to Las Vegas and back home that was 260 Mi and no more leak on top of the Brake Fluid reservoir so i think that i fixed it.

08-18-2009, 10:35 AM	#18
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	See this for new upper 1/2 of hurst shifter. http://www.camaro5.com/forums/showth...d=1#post812293

08-20-2009, 09:04 PM	#19
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	As of today i got the go ahead to say that i will be 1 of 6 test mulls for Vararam, I am out in AZ, So will update as soon as i have the unit some time next week, We will post on the install and how easy it is and the improvement to the car maybe some new dyno's will see.

09-02-2009, 11:34 AM	#22
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Got my ARH back from the coating shop, I will put it on in 30 days or so, I have to complete my testing for Vararam first. But i hope you like the pics. And at the same time put on the MSD wires. Hope you like it.

09-06-2009, 02:31 PM	#24
Rygain Drives: VW Scirocco 2009, Chevy Camaro Join Date: Aug 2009 Location: France Posts: 94 View My Garage	whohooo Great job dude !! __________________ Chevy camaro 2LT Yellow Rally / Rally Stripes / tapshift / Sunroof comes to france 09/27/2009

09-23-2009, 09:32 PM	#26
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Revolution hood So for the last 2 months i have called and e-mailed Revolution AKA Tommy Z to get his hood and front and the rear spoilers and the grill and SS emblems And i got this today. Attached Images

10-15-2009, 01:44 PM	#27
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	I put on the G8 Pedal covers to day. And this is the part numbers. you will need one of this #92213647 and for the M6 two of this #92173105 hope this helps you out. To see pics go to this link. http://www.camaro5.com/forums/showpo...9&postcount=62 Last edited by 2SSRS@Gen5diy; 10-15-2009 at 03:23 PM.

10-15-2009, 01:57 PM	#28
anthonybyram Drives: 1972 Z28, torch red,454 Join Date: Apr 2009 Location: mexico,mo Posts: 562 View My Garage	Thats gonna look killer!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
65 Camaro's to choose from.	tony_c	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	25	08-29-2009 03:25 PM
Why aren't there any Aqua Blues yet?	txcamarogirl	5th Gen Camaro SS LS LT General Discussions	40	08-20-2009 10:05 AM
why get an rs package on the 2ss?	LS3SSRS	5th Gen Camaro SS LS LT General Discussions	66	08-16-2009 05:14 PM
Check your Order here	bvonscott	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	665	06-29-2009 01:00 PM
Exhaust Upgrade for 2SS	ericeast	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	7	05-19-2009 10:02 PM