1000WHP+ GT5594 + POWERGLIDE + E85 - Page 36 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ttshovel · 03-12-2020, 12:20 PM

Quote:

Originally Posted by Chris49066SS

How much weight did you shave off when you cut up your front and put the chromoly bars in? And how exactly did you do your windshield?

The whole process of the windshield was earlier in the build thread.

The front end saved roughly 30lbs

Chris49066SS · 03-12-2020, 12:25 PM

Quote:

Originally Posted by ttshovel

The whole process of the windshield was earlier in the build thread.

The front end saved roughly 30lbs

Thanks, I missed it, still going through it all, looks awesome!

ttshovel · 03-17-2020, 07:20 AM

Boost leash pro.

ttshovel · 03-18-2020, 07:05 PM

Fab guy started working on the hotside. Coming along nicely.

Got the ballanger motorsports wideband with ntk sensor. About the only one on the market that will read the low afrs of methanol

ttshovel · 03-20-2020, 04:55 AM

Turbo fab is about done. Everything is tacked. Decided to put wastegate in the turbine housing for ease of fitment.

Next up is cage work and wheelie bar install.

ttshovel · 03-26-2020, 02:12 PM

Made the trip to drop off the wheelie bars and mounts today. Also dropped off my 5 gallon cell to have one of the 10an bungs cut off to put a -12 in its place.

Having him add a 1/8npt bung to the top of the wastegate and one on the charge pipe for the boost controller. The instructions for the boost leash were stupid specific about it lol.

Also started prepping my ls2 block for it. Put the main studs in and torqued em and filled it 100%. Hoping it holds up to 4 second power for a while

ttshovel · 03-31-2020, 06:03 PM

Made the trip over to the fab shop and helped em out today. Made alot of progress today. Will be picking it up Saturday! Super stoked to get it back and finished up

Redid the coolant lines to the heads. Looks way better.will still lose the stainless line to get it all matching.

ttshovel · 04-02-2020, 06:48 PM

They got the wheelie bars all mounted today. Stoked to get this thing back!

AGM 1LE · 04-02-2020, 08:31 PM

Holy sh** it looks so good with those wheelie bars on!

ttshovel · 04-03-2020, 08:04 PM

All done!!! Turned out awesome

joshnmn · 04-03-2020, 09:33 PM

Whoa!! Super nice

Time to let it eat!!

Tajefe Couple · 04-03-2020, 10:14 PM

Turned out looking awesome, be cool to see how well it does!

ttshovel · 04-04-2020, 02:40 PM

Went and picked the car up, threw it on the scales. Was hoping for a little more loss but it is what it is. Still needs the driveshaft, battery, coolant, and wiring to he exact so itll be sub 3k

Jayjellyfish212 · 04-04-2020, 09:56 PM

Such an awesome build brother! Been watching the thread all along

03-17-2020, 07:20 AM	#493
ttshovel Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013 Location: findlay,oh Posts: 2,069	Boost leash pro. Attached Images __________________ 12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel

03-18-2020, 07:05 PM	#494
ttshovel Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013 Location: findlay,oh Posts: 2,069	Fab guy started working on the hotside. Coming along nicely. Got the ballanger motorsports wideband with ntk sensor. About the only one on the market that will read the low afrs of methanol Attached Images __________________ 12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel

03-20-2020, 04:55 AM	#495
ttshovel Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013 Location: findlay,oh Posts: 2,069	Turbo fab is about done. Everything is tacked. Decided to put wastegate in the turbine housing for ease of fitment. Next up is cage work and wheelie bar install. Attached Images __________________ 12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel

03-26-2020, 02:12 PM	#496
ttshovel Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013 Location: findlay,oh Posts: 2,069	Made the trip to drop off the wheelie bars and mounts today. Also dropped off my 5 gallon cell to have one of the 10an bungs cut off to put a -12 in its place. Having him add a 1/8npt bung to the top of the wastegate and one on the charge pipe for the boost controller. The instructions for the boost leash were stupid specific about it lol. Also started prepping my ls2 block for it. Put the main studs in and torqued em and filled it 100%. Hoping it holds up to 4 second power for a while Attached Images __________________ 12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel

03-31-2020, 06:03 PM	#497
ttshovel Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013 Location: findlay,oh Posts: 2,069	Made the trip over to the fab shop and helped em out today. Made alot of progress today. Will be picking it up Saturday! Super stoked to get it back and finished up Redid the coolant lines to the heads. Looks way better.will still lose the stainless line to get it all matching. Attached Images __________________ 12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel Last edited by ttshovel; 04-01-2020 at 11:20 AM.

04-02-2020, 06:48 PM	#498
ttshovel Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013 Location: findlay,oh Posts: 2,069	They got the wheelie bars all mounted today. Stoked to get this thing back! Attached Images __________________ 12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel

04-02-2020, 08:31 PM	#499
AGM 1LE Drives: 14 SS/ 1LE Join Date: Jun 2013 Location: parts unknown Posts: 922	Holy sh** it looks so good with those wheelie bars on! __________________ 2014 1SS/1LE AGP 57/57s, E85 + meth injection, Monster triple, ZL1 diff swap, Z28 coilovers

04-03-2020, 08:04 PM	#500
ttshovel Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013 Location: findlay,oh Posts: 2,069	All done!!! Turned out awesome Attached Images __________________ 12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel

04-03-2020, 09:33 PM	#501
joshnmn 2&THEHIT Drives: 5th Gen Camaro; 5th Gen Ram 3500 Join Date: Mar 2018 Location: Garner, NC Posts: 1,012 View My Garage	Whoa!! Super nice Time to let it eat!!

04-03-2020, 10:14 PM	#502
Tajefe Couple Drives: Never just fly under the radar Join Date: Jul 2015 Location: Kansas Posts: 1,531 View My Garage	Turned out looking awesome, be cool to see how well it does! __________________ 1-8-4-3-6-5-7-2 Old Skool

04-04-2020, 02:40 PM	#503
ttshovel Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013 Location: findlay,oh Posts: 2,069	Went and picked the car up, threw it on the scales. Was hoping for a little more loss but it is what it is. Still needs the driveshaft, battery, coolant, and wiring to he exact so itll be sub 3k Attached Images __________________ 12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel

04-04-2020, 09:56 PM	#504
Jayjellyfish212 Drives: 2014 1LE Join Date: Aug 2015 Location: Upstate NY Posts: 2,050 View My Garage	Such an awesome build brother! Been watching the thread all along __________________ Car mods: never enough!