05-02-2014, 06:25 AM | #1 |
Pfadt rear sway bar hardware help needed!
Long story short. My car was on a lift yesterday, getting X-pipe installed, while it was up I was looking around the under carriage when I noticed that one of the bracket on my rear Pfadt Sport sway bar was gone! The bushing was still there but no bracket. I know Pfadt is no longer doing business but somewhere out there there should be still replacement hardware floating around, someone had to have bought there remaining stock.
If anyone can point me to a business that has the bracket or any professional suspension gurus can give me recommendations what I can use as replacement, I would greatly appreciate it. |
|
05-03-2014, 04:45 AM | #2 |
Drives: 2013 SS Supercharged Convertible Join Date: May 2013
Location: SoCal
Posts: 2,714
|
JDP Motorsports or Apex Motorsports can help you out. You have a 2011, so, unless you changed your LCA's to FE4 you have FE3 rear LCA's and the rear end link mount is weak and is known to crack or break off. They sell end link mount stiffeners and get some new aftermarket endlinks.
|
05-03-2014, 09:41 AM | #3 |
Drives: cars Join Date: May 2011
Location: Oversneeze
Posts: 4,544
|
Measure the bar and you can get one from Energy Suspension or other major suspension distributor.
http://www.energysuspensionparts.com...r-Bushings.asp |
05-05-2014, 11:25 AM | #4 | ||
Quote:
Quote:
|
|||
05-05-2014, 11:45 AM | #5 | |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
Quote:
|
|
05-05-2014, 04:21 PM | #6 |
Drives: 2013 SS Supercharged Convertible Join Date: May 2013
Location: SoCal
Posts: 2,714
|
Your right.
|
05-06-2014, 07:37 PM | #7 |
Gentlemen, thank you for all the input. Issue resolved.
|
|
|
|
|
|