10-19-2021, 06:37 PM | #1 |
Drives: 2010 2SS / RS Join Date: Aug 2021
Location: Palm Coast, Florida
Posts: 25
|
Ready to buy a set of wheels for my 2SS/RS
Hi all:
Ready to buy a set of wheels and many choose this popular Z28 wheel. I find sets of 4 in 20 X 10 for around $1,500 and was wondering if it would be ok to run this in the front? I've read that it is ok. I would like to find a staggered set of 20 X 9 and 20 X 10. But if not, would I be ok? I don't need fender rub. Thanks!! |
10-19-2021, 06:39 PM | #2 |
Drives: 2010 2SS / RS Join Date: Aug 2021
Location: Palm Coast, Florida
Posts: 25
|
I think it will be a great improvement over my current wheels. ZL1 style...
|
10-19-2021, 06:42 PM | #3 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,574
|
20x10 is perfectly fine with the correct offset in front. It made mine look exactly flush with the wheel arch and looks amazing. I have no rubbing and am lowered 1.75 inches. I am not on those wheels though, I am running the MRR M017's.
I am running 20x10 front with +23 offset and 20x11 rear with +43 offset. 275/40 in front and 315/35 in the back. We have plenty of room under these wheel arches. Only thing I had to do was tie back my E-brake cables on both sides due to the 315s in back. Those would have rubbed a bit if I hadn't.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
10-19-2021, 06:43 PM | #4 |
Drives: 2011 Inferno Orange Camaro 2SS/RS Join Date: Nov 2011
Location: Pittsburgh, PA
Posts: 1,368
|
I have those exact wheels in that size. No issues at all.
They will look great! |
10-19-2021, 06:47 PM | #5 |
|
It was already said, but 20x10 is totally doable with the right offset. 1LEs and ZL1s run 20x10 in front.
Sent from my Pixel 5 using Tapatalk
__________________
|
10-19-2021, 07:02 PM | #6 |
Drives: 2010 2SS / RS Join Date: Aug 2021
Location: Palm Coast, Florida
Posts: 25
|
OK, so if I run all 4 20 X 10 with a back spacing 23mm up front and 35 in the rear I should be fine or even +43 in the rear? I find the +23 and the +35 common in this wheel.
|
10-19-2021, 07:15 PM | #7 |
Drives: 2010 2SS / RS Join Date: Aug 2021
Location: Palm Coast, Florida
Posts: 25
|
|
10-19-2021, 07:17 PM | #8 |
Drives: 2010 2SS / RS Join Date: Aug 2021
Location: Palm Coast, Florida
Posts: 25
|
OK, so for approval>> Here's my choice for up front and rear wheels respectively.
Replica 126C Camaro Z28 20x10 5x120 +23mm Chrome Wheel Rim 20" Inch Replica 126C Camaro Z28 20x10 5x120 +35mm Chrome Wheel Rim 20" Inch |
10-19-2021, 08:51 PM | #9 |
Account Suspended
Drives: 2013 2SS/RS Convertible Join Date: Apr 2016
Location: Lehigh Valley, PA
Posts: 3,873
|
I’m running 20x9.5 front and 20x11 rear. For tires 275/40 in the front with a 5mm spacer and 315/35 rear. You’ll love the extra meat.
|
10-19-2021, 09:29 PM | #10 |
Drives: Camaro Convertible 2014 1LT Join Date: May 2019
Location: New Jersey
Posts: 1,013
|
Thanks to 1JEWLDSSRS help, I went to 20x9 in front and 20 x10 in back with 275/40 tires in front and 315/35 in back. Didn't have to make any adjustments or have no rubbing.
__________________
|
10-19-2021, 09:51 PM | #11 |
Drives: 2015 2SS Commemorative Edition Join Date: Mar 2020
Location: NJ
Posts: 184
|
To be honest I don't think it will look much different. Both wheels are chrome and pretty similar looking. You already have silver, I would go with black. IMHO.
__________________
|
10-20-2021, 08:31 AM | #12 | |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,435
|
Quote:
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
10-20-2021, 08:33 AM | #13 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,435
|
Thank you my friend!! Was fun helping you out. Man she sure looks killer with those wheels, just gotta say!!
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
10-20-2021, 03:19 PM | #14 | |
Drives: 2010 2SS / RS Join Date: Aug 2021
Location: Palm Coast, Florida
Posts: 25
|
Quote:
|
|
|
|
|
|