[JamesNoBrakes]

Just installed the winter wheels/tires, 19x8.5, 15mm offset. Blizzak 255s mounted up. Still have to reprogram TPMS and install rock-guards.

[Yellow6thGen]

Just went to Dyno and received the base line Runs. The main reason was to see what the Mods will be showing in gains over the time.

Dyno was Dynojet
18 ZL1 A10 Convertible 800 miles and (1) Drag day with Pray Perfomance
Best pull in 6th gear 555HP and 600TQ not bad if I do say so....I was very happy with it....and the tuners at M&A we’re impressed....

Can’t wait to see what bolt on axel back that will be made next week at Kooks, and the rotofab...

[Yellow6thGen]

Originally Posted by keon718nyc

Taking off my Oracle side markers as one of the front markers LED's is starting to go in and out on 2 spots after 6 months. Looks like i will be going with Diode Dynamics after all.... Anyone have luck getting theirs replaced? After all the crap in the forums about them i have my doubts and most likely be taking a loss on the Oracles LOL. Live and learn i say to myself as i had lost patience in the past.

I have not had any issues with mine on the 6thGen, and Justin will get a replacement out to you ASAP. You have to pay return shipping, but well worth it. Just shoot him an email, I’ve not had problems with these new 6th Gens yet knock on wood...

I will let you know how my ZL1s look... and hold up too..

[DC5]

I installed 2SS door knee pads today (shout out to ThatGMPartsGuy for another stellar transaction):

[metros11]

Originally Posted by DC5

I installed 2SS door knee pads today

Link to these?

[GOMD]

Originally Posted by DC5

I installed 2SS door knee pads today (shout out to ThatGMPartsGuy for another stellar transaction):

Just the doors? Was considering getting the plastic pieces upholstered but may just grab the two door pieces and call it a day.

[TenSeven]

Originally Posted by metros11

Link to these?

https://stores.revolutionparts.com/t...%20knee%20pads

[DC5]

Originally Posted by metros11

Link to these?

www.ThatGMPartsGuy.com

23365010 (Armrest Cover, Left)
23365023 (Armrest Cover, Right)

They cost $49.25 each.

[DC5]

Originally Posted by GOMD

Just the doors? Was considering getting the plastic pieces upholstered but may just grab the two door pieces and call it a day.

For now, yes. Since my vehicle is obviously a 1SS, I don't think the center console knee pads are vital to the aesthetics of the interior (namely, the cloth seating surfaces). However, I will likely purchase them at some point in the future.

For approximately the same cost as the center console knee pads, I would rather purchase the illuminated sill plates, as they represent a greater upgrade IMO (see photograph below). What do you all think?

[GOMD]

Originally Posted by DC5

For now, yes. Since my vehicle is obviously a 1SS, I don't think the center console knee pads are vital to the aesthetics of the interior (namely, the cloth seating surfaces). However, I will likely purchase them at some point in the future.

For approximately the same cost as the center console knee pads, I would rather purchase the illuminated sill plates, as they represent a greater upgrade IMO (see photograph below). What do you all think?

I am in the same boat. I already did the illuminated door sills, and now I would like the leather knee pads. I think I agree that the door panels seem more important, and I don’t quite understand why the console pads are so much more expensive either.

[Soleil]

How there’re fixed? Just clipped as the knee pads?

[DC5]

Originally Posted by GOMD

I am in the same boat. I already did the illuminated door sills, and now I would like the leather knee pads. I think I agree that the door panels seem more important, and I don’t quite understand why the console pads are so much more expensive either.

Thank you for your input. Since the immediate surfaces surrounding the door knee pads are soft-touch materials (i.e., the door panel armrest and insert), the 2SS door knee pads look entirely appropriate on a vehicle equipped with cloth seating surfaces.

I'm still debating the purchase of the center console knee pads. As most vehicles, excluding those in the luxury or exotic segments, generally limit the use of soft-touch materials on the center console to the armrest, I don't find the center console knee pads are imperative to the aesthetics of the interior. Moreover, when you consider what they cost and the fact that they do not feature foam backing like the door knee pads, they really start to appear unnecessary.

[DC5]

Originally Posted by Soleil

How there’re fixed? Just clipped as the knee pads?

Correct. The door knee pads are secured by five clips. A trim tool and 10 minutes is all that you need to install them.

[Spanky1]

You don't even need the trim tool!