10-29-2013, 06:57 PM | #1 |
Drives: 2ss/rs/2013 camaro 1LE Join Date: Jul 2013
Location: missouri
Posts: 107
|
pinon angle
Is the pinon angle upset when lowering theses gen 5 camaro's .
|
10-29-2013, 07:40 PM | #2 |
|
No
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
|
10-30-2013, 08:45 AM | #3 |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
Since these new Camaros have IRS in the rear of the car the pinion angle is not upset by changing the ride height of the vehicle. The new Camaros are a completely different animal compared to the earlier generations with the live axle/solid axle where the pinion angle does change as the ride height changes.
|
10-30-2013, 02:49 PM | #4 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
You can upset the axle half shafts by going too low though. So that is something to consider.
Best regards, Tyler 888-308-6007 |
10-30-2013, 07:09 PM | #5 |
Drives: 2ss/rs/2013 camaro 1LE Join Date: Jul 2013
Location: missouri
Posts: 107
|
ah yes.. I knew there was some thing ...shafts
|
|
|
Thread Tools | |
|
|