06-12-2017, 04:59 PM | #15 |
Drives: 2010 Camaro SS Join Date: Jan 2015
Location: Valencia
Posts: 1,305
|
|
06-12-2017, 05:18 PM | #16 |
Drives: 2009 ZR1 Join Date: May 2010
Location: KCMO
Posts: 3,205
|
|
06-12-2017, 05:21 PM | #17 |
Drives: 2010 Camaro SS Join Date: Jan 2015
Location: Valencia
Posts: 1,305
|
Very Cool! Thank you
|
06-12-2017, 05:28 PM | #18 |
Drives: 2009 ZR1 Join Date: May 2010
Location: KCMO
Posts: 3,205
|
You're welcome. If you look closely at the pics, there will be a spot or two you can't get a rivet through because the floor pan is too close to the tank.
|
06-12-2017, 09:42 PM | #19 |
Drives: 2010 2SS/RS Join Date: May 2010
Location: USA
Posts: 592
|
Genius blake -b!
__________________
LME built LSX427 w/t all Callies internals| AGP 65/65 TT | Holley Sniper Intake | Brodix BR3/LME custom ported | LME custom cam | Pro EFI 112 ECU | ID-1700x | NGK BR7EF | AGP's-Fore Triple Fuel pump | Monster LT1-S Triple | ZL1 3.23 diff, CF driveshaft, ZL1 axles | Hurst Line Lock | MGW Retro Short Throw | Pfadt solid subframe mounts | Prothane Motor Mounts | Revshift Poly Trans insert | Ground Control camber/caster plates | Accelerated Racing Solutions tuned| God is too good! I don't deserve it, but I sure will accept it!!! |
06-13-2017, 02:40 PM | #20 |
Even if I dropped the tank from under, I was still going to cut an access. It only makes sense. If I need to upgrade again or there is a pump malfunction it can be easily resolved. Some of us do not have easy access to lifts. This is well documented procedure and if proper care is taken, there are no issues.
|
|
06-18-2017, 08:38 AM | #21 |
Drives: 2013 ss2 vert l99 Join Date: Apr 2017
Location: South florida
Posts: 150
|
True... I messed up.. I have a new fuel tank arriving wednesday... live and learn :-/
|
06-27-2017, 08:29 AM | #22 |
"Old School"
Drives: 2010 2SS L99 Join Date: Apr 2015
Location: Sherrills Ford, NC
Posts: 1,295
|
Probably shouldn't use a Sawzall for cutting the access panel. a cutting wheel and a little finesse would be good.
|
06-27-2017, 12:36 PM | #23 | |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Quote:
Air snips and the look up the old article where the guy shows you exactly where to cut..
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
|
05-01-2021, 09:26 PM | #24 |
Drives: Camaro ss Chevy Join Date: Nov 2020
Location: Us
Posts: 104
|
What size trap door did you get? The 8x8 or 6x6
|
05-01-2021, 09:43 PM | #25 |
Drives: 2014 1SS/1LE Join Date: Nov 2015
Location: Louisville, KY
Posts: 826
|
I just did it with an 8x8. I don't think I could fit the pump through a 6x6.
Sent from my Pixel 5 using Tapatalk
__________________
830 WHP 700 WTQ, Whipple 2.9 @ 13lbs Boost, Flex Fuel Tune by Blevins Tuning, LSA SBE, 3.5 GripTec, ATI LS3 Damper, AFR 260cc Mongoose, ARP Studs, Yella Terra Ultralites, Johnson 2110R, BTR PDS Stage 3, Melling 10355, Improved Racing Baffle, ID1050X, DSX Triple Fuel Pump, RotoFab CAI, NW 103mm TB, Stainless Works 1-7/8" LTH to 3" Speed Eng w/ X-pipe to NPP, Powermaster 9509 XS, Detroit Speed Motor Mounts, MGW, Monster LT1-S, ZL1 Calipers, DBA Rotors & Pads, Bilstein B6 Struts & Shocks, BMR 1.25" Drop Springs & Adj Rear Bar, Pegasus Solid Bushings, Z/28 Wheels, other misc parts.
|
05-01-2021, 11:06 PM | #26 |
Drives: Camaro ss Chevy Join Date: Nov 2020
Location: Us
Posts: 104
|
|
|
|
Tags |
fuel pump access hatch., fuel trap door, trap door |
Thread Tools | |
|
|