05-28-2012, 11:00 PM | #1 |
under front bumper spoiler
Like a dumb ass I pulled into a parking spot to close and got the rubber spoiler caught on the parking curb ripped it off . I'm in the Orlando area anyone with an extra would be great or know the part number would help me out a lot thanks .
|
|
05-28-2012, 11:50 PM | #2 |
The parking curb has a peace of rebar sticking up that's what got me .
|
|
05-28-2012, 11:53 PM | #3 |
Est.1775
Drives: '15 Challenger Hellcat (sold) Join Date: Sep 2009
Location: SoCal
Posts: 5,502
|
I'd just leave it off.
|
05-29-2012, 12:23 AM | #4 |
I kinda agree . But the car is new and I can fix it myself if the part is cheap
|
|
05-29-2012, 12:44 AM | #5 |
Est.1775
Drives: '15 Challenger Hellcat (sold) Join Date: Sep 2009
Location: SoCal
Posts: 5,502
|
If its the piece I'm thinking of it should be extremely cheap. It's underneath the car right? You can barely see it unless your underneath it?
|
05-29-2012, 12:57 AM | #6 |
yea u can only see it if u get under the car. but if u stand far enough back u can see it if u know what your looking for
|
|
05-29-2012, 01:01 AM | #7 |
it ****ed up one of the plastic screw holes i think with a large washer it would fix it might need to be hit it with a heat gun to reshape it
|
|
05-29-2012, 01:24 AM | #8 |
Don't Like it? Suggit.
|
The purpose of that piece is to channel air, and important for keeping your motor cool. Although if you snag that bastard on a curb, it can F your whole bumper.
Car should be fine without it under normal driving conditions, but if the car sees any substantial track time, I'd go ahead and replace it.
__________________
"Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp |
05-29-2012, 01:33 AM | #9 |
Wonderfully Awful Idea
|
This is the part.
92234403 DEFLECTOR, FRT BPR FASCIA AIR
__________________
|
05-29-2012, 01:40 AM | #10 |
check this out http://www.gmpartsdirect.com/results.cfm . does that seem right cheap as hell
|
|
05-29-2012, 01:43 AM | #11 |
that links not right sorry they want 35.26 for it does that seem right?
|
|
05-29-2012, 10:11 AM | #12 |
how about the plastic screws that hold it in anyone know there part number
|
|
05-29-2012, 10:26 AM | #13 |
Account Suspended
Drives: 2012 AGM 2SS Join Date: Feb 2012
Location: Beaufort, NC
Posts: 1,383
|
I got one for a 2011 mustang lol. Not much help but mine was about $75 for mine.
|
|
|
|
|