10-15-2012, 12:17 PM | #15 |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
Just because you installed bulbs without a retrofit does not mean you have a cheap kit.
|
10-15-2012, 01:08 PM | #16 |
Drives: 2010 Camaro SS Join Date: Sep 2012
Location: Cherokee County Georgia
Posts: 161
|
So, this item from AAC is what I want, correct?
http://www.automotivelightstore.com/...hidkits-1.aspx However, I don't see what I need to "retro-fit".... |
10-15-2012, 03:51 PM | #17 |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
A retrofit is when you install an hid projector into a reflector housing. You don't need to do it if you don't want to. Most will recommend it but if it isn't in your budget, oh well.
That kit looks like everything you need. But the price is a little much in my opinion. A kit like that goes for 150 on the retrofit source and it comes with a 5 year warranty. |
10-15-2012, 04:09 PM | #18 | |
God Bless Dawson
Drives: Synergy for my Daughter Join Date: Feb 2010
Location: Texas
Posts: 3,057
|
Quote:
AAC has lifetime warrantee on their items....... not just 5 years. Many do not like the projector.... budget or not. It comes down to a matter of taste... not everyone has the same. To each their own.
__________________
|
|
10-15-2012, 04:17 PM | #19 | |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
Quote:
I agree, everyone should do what they see fit. Don't let anyone tell you what to do and what not. |
|
10-15-2012, 04:30 PM | #20 | |
God Bless Dawson
Drives: Synergy for my Daughter Join Date: Feb 2010
Location: Texas
Posts: 3,057
|
Quote:
If I understand you correctly then they only warrantee for 5 years... ballast and all. Shipping is not covered by most any company on warantee returns. Shipping on an item like this is minimal anyway.
__________________
|
|
10-15-2012, 05:12 PM | #21 |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
Yes, the warranty is for 5 years.
The ballasts and bulbs would be the only part I would be concerned with anyway. Wiring if done right, will not fail. They don't ask you to ship items back so you don't have to pay shipping. AAC asks for shipping both ways. Although it may be minimal, it's still a hassle going to go drop it off and still paying the 20 dollars for shipping both ways |
10-15-2012, 07:00 PM | #22 |
Drives: 2010 Camaro SS Join Date: Sep 2012
Location: Cherokee County Georgia
Posts: 161
|
Could someone point me to a retrofitsource xenon(not a bi-xenon) kit? That site is a little confusing...
|
10-15-2012, 07:11 PM | #23 |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
As soon as I get home, ill post a link. Any reason you don't want a bi-xenon?
|
10-15-2012, 07:37 PM | #24 |
Drives: 2010 Camaro SS Join Date: Sep 2012
Location: Cherokee County Georgia
Posts: 161
|
As stated, it really isn't needed. With the other HID that was in the headlights, I never needed the hi beams.
|
10-15-2012, 08:05 PM | #25 |
Drives: 2010 Camaro SS/RS Join Date: Aug 2011
Location: AZ
Posts: 190
|
question
True or not??? If you just stick in the HID kit but no projector, you are gonna be that guy that blasts white light all over the place blinding everyone?? No cut off?
__________________
19 GMC CC 4x4 2019 Harley RGS |
10-15-2012, 08:28 PM | #26 |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
I actually don't think the retrofitsource sells a xenon hid kit that is completely plug and play for our camaros. You could buy another kit that you could try to fit but that just defeats the purpose in my opinion. If it were me, I would get the kit from the retrofitsource. Just for the simple reasoning that they are about 100 dollars cheaper than AAC and they are bi-xenon. I know you stated you won't need them but I figure it's ok to have them just in case.
Here's a link to the bi-xenon kit. http://www.theretrofitsource.com/pro...ducts_id=12825 |
10-15-2012, 08:54 PM | #27 |
Drives: 2010 Camaro SS Join Date: Sep 2012
Location: Cherokee County Georgia
Posts: 161
|
So that kit would be a complete plug and play?? If so, that is what I will go with.
|
10-15-2012, 09:19 PM | #28 |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
Yes, I just don't know which relay harness you'd like. I would either email nate or andrew at the retrofit source and ask what's the difference and then decide which one you'd like. I can pm you their emails if you'd like. But other than that, yes it would be plug and play. It would just add the hid kit to your reflector housing.
|
|
|
|
|