help with next mod

[Austinv16]

i have a 2000 ss that i am building looking for some good mods that dont cost a ton of money current mods are..............kooks long tubes ,slp lid ,fast 92mm throttle body,ls3intake comp lsr cam 235/243 621/624 113lsa milled l92 heads ly6 6.0 block prc .650 double springs kit 42lb injectors thought bout having heads and throttle body ported and buying lightweight flywheel but not sure if hp gains is worth the money feel free to tell me your thoughts thanks

[demonspeed]

Seems to me like you should be preparing for a new clutch and/or rear.

[insidethreat07]

Originally Posted by demonspeed

Seems to me like you should be preparing for a new clutch and/or rear.

[Scrappy Doo]

Originally Posted by demonspeed

Seems to me like you should be preparing for a new clutch and/or rear.

THIS.

Or a set of wheels

[Austinv16]

Have clutch upgrade but looking in to buying a 9in rear for it any luck with 4.10 gears in a 10 bolt when I first bought the car it had 4.10 in it but didn't take long for it to go out and that was a 6.0 with less mods seen so gears for 10 bolt that say for street and strip anyone have any luck with these

[Austinv16]

Any answers on how much more hp porting throtle body or heads or both would pick up

[demonspeed]

I didn't have much luck with 4.10's in my 2000 SS's 10 bolt. I did, however, run drag radials -- but I also put in a Auburn diff, hardened studs, and an aluminum cover. Still didn't take the abuse. This was with just a lid and catback!

In my personal opinion, it's just not worth messing with a 10 bolt if one drives their car with any sense of purpose.

[Austinv16]

Any idea what this setup will put to the wheels hp wise Im hopeing for atleast 480

[Scrappy Doo]

Originally Posted by Austinv16

Any answers on how much more hp porting throtle body or heads or both would pick up

Too hard to say. You would see some gain im sure especially with the heads, but not sure the $ is worth it.