06-14-2014, 11:28 PM | #1 |
Roto-fab carbon fiber finish peeling
Getting a consensus to know if other C5 members that have the Roto-fab carbon fiber "finish" CAI is peeling or bubbling? I have had mine for 30 days and it's already blistering severely.
|
|
06-14-2014, 11:47 PM | #2 |
Drives: 2012 ZL1 - #670 Join Date: Jun 2009
Location: Seminole, Fl.
Posts: 8,009
|
Try contacting the folks at Roto-Fab, their customer service is second to none ...
__________________
|
06-14-2014, 11:56 PM | #3 |
06-15-2014, 12:08 AM | #4 |
Ragtop Rocket!!!
Drives: Black on Black Convertible Join Date: Mar 2013
Location: San Antonio Texas
Posts: 809
|
I've had mine over a year now and it still looks new!
__________________
ADM built 2013 Triple Black ZL-1 Convertible M6
ADM custom cam, LPE stage 2 heads with dual valve springs, LS-3 ported throttle body, LPE 2 piece pulley, LPE overdrive balancer, 10% overdrive pulley, ported supercharger inlet, ADM race intake system, stainless works 1-7/8 headers, Injector Dynamics injectors, ADM heat exchanger, ADM dual fuel pump system, ADM exhaust switch, ADM 3 tunes tuning package. 744rwhp 727rwtq |
06-15-2014, 12:08 AM | #5 |
Drives: 2013 Summit White ZL1 Join Date: Jun 2014
Location: Peotone, IL
Posts: 106
|
Have everything from roto-fab plus custom pieces. No problems
__________________
2013 Summit White ZL1
|
06-15-2014, 02:42 AM | #6 |
Drives: 69 Chevelle SS396 2013 ZL1 Join Date: Mar 2010
Location: West
Posts: 700
|
No problems here,,,was any fluid spilled on it, maybe?
__________________
|
06-15-2014, 10:53 AM | #7 |
Drives: Camaro Join Date: Mar 2012
Location: Québec, Canada
Posts: 59
|
|
06-15-2014, 11:07 AM | #8 |
Roto fab contacted me to rectify. My issue seems isolated from the responses on the forum. No fluids were spilled, clean install. Thank you C5 for all your inputs and thanks to Roto fab for contacting me.
|
|
06-15-2014, 11:50 AM | #9 |
Drives: ZL1 Join Date: May 2012
Location: Kansas
Posts: 109
|
When I was installing my Rotofab I ran into a slight issue. I shot them an email with pictures from my phone. They replied within an hour. On a Saturday. At 10:30 pm.
__________________
2014 BRM ZL1 #229
Rotofab, VMax, Moroso, MGW I used to be schizophrenic, but we're okay now. |
06-15-2014, 01:49 PM | #10 |
Drives: 2013 ZL1 Convertible Join Date: Oct 2013
Location: Valrico, FL
Posts: 515
|
Actually, you're not alone. I had the elbow develop the bubbling you're talking about and called Roto-fab. I sent them pics of the problem and they sent out a new piece right away. They asked the same question as above about anything being spilled on it but I didn't and they were good with that. I have since noticed some bubbling on the housing piece that I was planning on calling them about this coming week. They're great people and stand by their products so I expect that I will have a wonderful outcome this second time around as well.
__________________
2013 ZL1 Auto Convertible - BRM
Best: 10.829@127.15 FI Interchiller, Roto-Fab CAI, Big Gulp & Res, 9.1/2.5 Pulleys, PB&S, DeatschWerks 1500cc, Fore triple pump, Pfadt LT's, RD HX, MT DR's New times to come with E85 2016 2SS Auto - Hyper Blue Metallic Roto-Fab CAI |
06-15-2014, 04:44 PM | #11 | |
Quote:
Here are my pics that I took this afternoon. I was reading a couple of different hydro dip service web sites and most say it is a 4 step process. 1-Prep/prime 2-Paint (if required for a base coat) 3-Dip 4-Clear To be honest my tubing out of the box looked like step 3 was the only step completed as you can see the stock plastic texture through the dip material. I may forego the CF dip and just get plain black plastic. |
||
06-17-2014, 05:48 PM | #12 |
Drives: 2013 ZL1 Convertible Join Date: Oct 2013
Location: Valrico, FL
Posts: 515
|
Yup, same thing as what I have.
__________________
2013 ZL1 Auto Convertible - BRM
Best: 10.829@127.15 FI Interchiller, Roto-Fab CAI, Big Gulp & Res, 9.1/2.5 Pulleys, PB&S, DeatschWerks 1500cc, Fore triple pump, Pfadt LT's, RD HX, MT DR's New times to come with E85 2016 2SS Auto - Hyper Blue Metallic Roto-Fab CAI |
06-17-2014, 06:01 PM | #13 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
It happens, but Roto-Fab will make it right and get you taken care of. They are great to work with.
Best regards, Tyler 888-308-6007 |
06-21-2014, 01:23 PM | #14 |
Yes it happens and I suggest anyone with the same issue contact Roto Fab. They were fast to act to rectify. I have sent the peeling/ bubbling MAF and elbow pieces back. I installed the new pieces and only with time will I see if the new pieces hold up. I hope they will and thank Roto Fab for being very professional and acting quickly.
|
|
|
|
|
|