07-31-2015, 09:02 PM | #1 |
Drives: 2010 IBM Camaro SS Join Date: Dec 2013
Location: GA
Posts: 263
|
Ideal Garage Master Cylinder???
Is anyone running the Ideal Garage Master Cylnder with a aftermarket clutch? None of the threads I found gave a definite answer? Clutch started sticking to the floor after the cam & is WORSE since Mantic ER2 install? Also getting locked out of third at high RPMs. Brake fluid is fresh & lines have been bled...clutch only has a few hundred miles...maybe it'll get better???
|
07-31-2015, 09:38 PM | #2 |
Drives: 2010 IBM Camaro SS Join Date: Dec 2013
Location: GA
Posts: 263
|
FYI, IG just emailed me back & it will work!!! I'm gonna try one more thing tomorrow & if it doesn't work I'm ordering their kit...I'm tired of this clutch!!!
|
11-02-2015, 06:20 AM | #3 |
Drives: 2013 1SS Join Date: Dec 2014
Location: South ga
Posts: 60
|
Hope it works I'm planning on doing that along with a longer shifting short short throw.
|
11-02-2015, 05:38 PM | #4 |
Drives: 2017 1SS 6spd Join Date: Jan 2011
Location: Utah
Posts: 2,869
|
I'm still running a stock clutch, but using the IdealG M/C for about 3yrs- it's a good piece of work. Along with DOT4 fluid and a separate clutch reservoir, pedal firmness/feel and shifting action is much improved IMHO.
|
12-16-2015, 07:15 PM | #5 |
Drives: 2010 supercharged LS3 Join Date: Jan 2010
Location: Le Mars, Iowa
Posts: 2,235
|
I'm running one with my Lingenfelter ZR1 twin disc. Works good. Still get the VERY occasional second gear grind, but it's 99% less than before. Also my pedal doesn't stick to the floor on high RPM shifts anymore.
|
12-17-2015, 02:06 AM | #6 |
Drives: camarao Join Date: Dec 2015
Location: CA
Posts: 2
|
it works I'm planning on doing that along with a longer shifting short short throw
|
|
|
|
|