01-25-2016, 02:26 PM | #183 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
Yep been off for a year. No issues.
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
02-01-2016, 10:10 AM | #184 | ||
Drives: 13' 1LE Join Date: Jan 2016
Location: Raleigh
Posts: 5
|
Quote:
Quote:
Where can I get either one of these for the rear and do you know if Pfadt springs will not allow it? Car is dropped -1 1/4 |
||
02-01-2016, 11:35 AM | #185 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
The 18x10.5 Race Star will work with a lowered car:
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
02-01-2016, 11:41 AM | #186 |
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
John do you sell these?
__________________
AGP 57/57 turbos and Dual Pump System, NA Cam, McLeod RXT clutch, MGW shifter, ZL1 Rear End, BMR Trailing Arms/Toe Rods, Pegasus Solid Cradle Bushings 10.7 @140mph M6
|
02-02-2016, 01:23 PM | #187 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
My 18x10.5s not yet.
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
02-16-2016, 09:45 AM | #188 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
I made some updates to the sticky. Please tell me if you see typos, or wheels or tires not listed.
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
02-16-2016, 12:00 PM | #189 |
Drives: 2015 2ss Join Date: Jun 2015
Location: Wooster ohio
Posts: 586
|
I'm not sure maybe they don't fit but weld makes a 17x4.5 rts s71 front for our cars with 1.7 or 2.2 inches of back spacing. Those are the ones I am ordering unless they do not fit
|
02-16-2016, 12:07 PM | #190 |
Drives: 2015 2ss Join Date: Jun 2015
Location: Wooster ohio
Posts: 586
|
Also has anyone mixed bias and radial I know it is not recommended just wondering I see a lot of people go with the M&H that requires a tube. I like that tire but eventually I will be going to slicks. But was going to do DR for now. Would this be an issue?
Also John Mickey makes a radial front that will fit. Not steer legal it's a et front 27.5 |
02-18-2016, 04:02 PM | #191 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
I've run radials up front and bias ply slicks in back on my car. Drove fine. I did get a set of MH bias DOT fronts for this year I'll post up how the car drives.
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
02-23-2016, 02:25 AM | #192 |
Drives: 2015 2ss Join Date: Jun 2015
Location: Wooster ohio
Posts: 586
|
I didn't think it really mattered. My dad as a 8 second chevelle with et fronts my m/t th y are a radial I'm pretty sure he has bias ply slicks.
|
02-25-2016, 09:36 AM | #193 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
FYI guys Race Star is releasing a 17x10.5 rear wheel, might be available in April. I'll keep you guys posted.
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
03-02-2016, 07:24 PM | #194 |
Drives: 2015 Camaro SS 1LE Join Date: Dec 2015
Location: Mi/IL
Posts: 5
|
Quick question .. Tring to figure out this rim and tire thing ..
After someone does the 15 inch break conversion and suspension conversion to run 15 inch rims can you still throw on the 20 inch rims for highway driving ??
|
03-04-2016, 02:35 PM | #195 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
Yes.
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
03-07-2016, 09:44 AM | #196 |
Cocaine
Drives: 2015 White 1SS/RS/1LE*NPP*RECAROS Join Date: Sep 2015
Location: NC/SC Border
Posts: 131
|
im looking to run Size: P325/45R18 Hoosier D.O.T. Drag Radial 2. what size wheels should I or could I get. Was thinking 1le replicas 18x11... is that ok. or can I can get a real sweet deal on 18x9.5....any info would be good. Reason im going with Hoosier is because the tiers alike 270 where Mickeys 305/45 18 s are around 340..
|
|
|
|
|