07-08-2015, 12:42 AM | #1 |
Go fast, please.
|
scratches on drivers side rocker...
Can these possibly be repaired or at least lessened with a heat gun? I don't want them to look bad, but the scratches kill me to see... They aren't terrible, but they bother me. Anyone have any luck at least reducing visibility of scratches in plastic with a heat gun?
|
07-08-2015, 09:34 AM | #2 |
Drives: Camaro Join Date: Mar 2012
Location: Québec, Canada
Posts: 59
|
Mother`s Back to Black
|
07-08-2015, 12:01 PM | #3 |
Go fast, please.
|
|
07-08-2015, 02:02 PM | #4 |
Go fast, please.
|
Just tried some back to black on it... It didn't do anything to them they are still very visible.
|
07-08-2015, 05:41 PM | #5 |
Drives: 2013 ZL1 ADM 750 Join Date: Dec 2014
Location: Maryland
Posts: 82
|
Go to your local auto parts store and purchase a spray can of Duplicolor trim paint. Shake the can up well and spray into a cup. Use a fine tip artist brush and color the scratch. It won't be perfect but it will conceal it some. Make sure you clean with rubbing alcohol first. Don't put it on thick it will just run out of the scratch. Multiple light coats. Good luck!
|
07-08-2015, 07:15 PM | #6 | |
H-Town Camaro Club Member
Drives: 17 Hyper Blue Metallic KLR-ZL1 Join Date: May 2009
Location: Pearland Tx.
Posts: 2,035
|
Quote:
__________________
|
|
07-08-2015, 07:18 PM | #7 |
Drives: 2012 2SS/RS M6 Join Date: Mar 2014
Location: kannapolis, nc
Posts: 378
|
just replace it, you sound just like me and a shotty touch up will drive you more crazy, you wont be happy till its fixed right
|
07-08-2015, 07:41 PM | #8 |
Drives: 2013 ZL1 ADM 750 Join Date: Dec 2014
Location: Maryland
Posts: 82
|
|
07-08-2015, 08:12 PM | #9 |
Drives: 2013 Triple Black ZL1 Vert M6 ECF Join Date: Mar 2011
Location: Trenton, Michigan
Posts: 7,047
|
I would be tempted to try a fine point sharpie.
|
07-08-2015, 08:19 PM | #10 |
Drives: 2013 Camaro ZL1 Join Date: Oct 2013
Location: Central Florida
Posts: 30
|
Had the same issue. Took off the rocker panel and a local body shop filled it and matched it perfectly. Cost $60
|
07-08-2015, 10:16 PM | #11 |
Go fast, please.
|
Interesting. Any idea what they used to match the texture? I would just buy a new one, but half of it is painted and I don't want to pay all that money to get a new one painted...
|
07-09-2015, 08:43 PM | #12 |
Drives: 2013 Camaro ZL1 Join Date: Oct 2013
Location: Central Florida
Posts: 30
|
I honestly don't. I was skeptical but I can honestly say I cant find the gouge.
|
|
|
|
|