12-15-2019, 11:43 AM | #1 |
Drives: 2013 ZL1 Join Date: Dec 2015
Location: Gulfport, MS
Posts: 250
|
BMR DragPak
Coilover conversion kit, upper mount, Strange coilover shocks, double adj, with 500 lb springs; rear lower control arms, chrome-moly, non adj; trailing arms, non adj. Fits Gen 5 Camaro. Had this on my car for one hour. Reason is because my car was lowered 1-1/4 on BMR springs, I could not adjust the ride hight where I wanted it without bottoming out. Live and learn. $1100. I also have the AFE MagRide Delete for you ZL folks. $300
|
12-16-2019, 02:27 PM | #2 |
J.Sick
Drives: 2010 Camaro SS Join Date: Nov 2010
Location: Ardmore, OK
Posts: 958
|
Same thing happened to me. My kit is still sitting in the shop. I need to quit being lazy and sell it.
__________________
"J.Sick"
2010 Camaro 2SS |
12-17-2019, 04:37 AM | #3 |
Drives: 2013 ZL1 Join Date: Dec 2015
Location: Gulfport, MS
Posts: 250
|
|
12-17-2019, 07:11 PM | #4 |
Drives: 2015 ZL1 Join Date: Jun 2015
Location: florida
Posts: 487
|
Bottoming out what?
|
12-18-2019, 11:20 AM | #5 |
Drives: 2013 ZL1 Join Date: Dec 2015
Location: Gulfport, MS
Posts: 250
|
In order to keep the ride height I had I had to adjust the coilovers to where there was no give and so it would hit the bump stop even when I went over the smallest bump. Now if I had not lowered my car this would not be an issue and the dragpak would work as advertised. I was afraid to get Carlyle’s conversion which might not have been an issue so only bought their brakes. Bottom line, I out smarted myself not knowing what I was doing. Very disappointing.
|
12-18-2019, 12:08 PM | #6 |
|
the front end rake caused by 15" conversions drove me nuts too, i sold my carlyle kit and went to a 17" setup and BC coilovers.... love it.
__________________
2010 Camaro 2SS/RS LS3
1093/1066 416, AGP 6262, E85, Cam |
12-20-2019, 04:43 AM | #7 |
Drives: 2013 ZL1 Join Date: Dec 2015
Location: Gulfport, MS
Posts: 250
|
Price drop $1000.
|
12-31-2019, 05:51 PM | #8 |
Drives: 2013 ZL1 Join Date: Dec 2015
Location: Gulfport, MS
Posts: 250
|
Coilovers sold
|
12-31-2019, 07:36 PM | #9 |
Onyx_Z7 <— Instagram
Drives: 2013 2ss 1le Join Date: Aug 2014
Location: Delaware
Posts: 634
|
How much for lower control arms shipped to 19962
|
12-31-2019, 07:53 PM | #10 |
Drives: 2015 SS 1LE Join Date: Jul 2018
Location: Longwood, FL
Posts: 92
|
How much for trailing arms?
__________________
(SOLD) 2015 SS 1LE- ESS V3 supercharged, ID850, Corsa extreme catback, Stainless Power 1 7/8 LT, ADM FPCM, JMS BAP
|
01-01-2020, 04:02 PM | #11 |
Drives: 2013 ZL1 Join Date: Dec 2015
Location: Gulfport, MS
Posts: 250
|
|
01-02-2020, 04:37 AM | #12 |
Drives: 2013 ZL1 Join Date: Dec 2015
Location: Gulfport, MS
Posts: 250
|
BMR lower control arms 275. BMR trailing arms 125. Sold coilovers & magride gizmos.
|
01-12-2020, 09:39 PM | #13 |
Drives: 2010 1SS LS3 Join Date: Aug 2019
Location: Waxahachie, TX
Posts: 276
|
Pm sent
__________________
2010 CGM 1SS
408/4L80E/ZL1 ESS G4 |
01-13-2020, 03:23 PM | #14 |
Drives: 2013 ZL1 Join Date: Dec 2015
Location: Gulfport, MS
Posts: 250
|
Only trailing arms left. 125
|
|
|
|
|