08-21-2012, 09:57 PM | #1 |
bcguy
Drives: 2011 ss/rs m6 Join Date: Nov 2011
Location: british columbia canada
Posts: 507
|
welds are home and on
well got the new chrome welds rt on 17x10 and 17x 5,mand h drags,325 and 28 x 17 skinnys,had to cut off roller skates on front and with 3 of us pulling down on back of car to simulate a hard launch no rubbing on lower control arm.looks great,lots more meat back there ,hope it helps
__________________
Agp 62/66 ,lsx 427. , Callie's ,diamond ,all pro ,American racing ,I'ds130s,102 intake and throttle body,etc .fore triple , Turbo 400 level 5 , b and m pro , dss carbon fiber , dss ford 9 inch with strange pumpkin,3.73 ratio,1400 hp axels,boost and air fuel pillar guages. Weld rts 17x10 and 17x4.5 with m and h drag radials and skinnys
|
08-21-2012, 09:59 PM | #2 |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
Oh, wait... |
08-21-2012, 10:07 PM | #3 |
bcguy
Drives: 2011 ss/rs m6 Join Date: Nov 2011
Location: british columbia canada
Posts: 507
|
ok its a bit dark here but i will try and get a photo up
__________________
Agp 62/66 ,lsx 427. , Callie's ,diamond ,all pro ,American racing ,I'ds130s,102 intake and throttle body,etc .fore triple , Turbo 400 level 5 , b and m pro , dss carbon fiber , dss ford 9 inch with strange pumpkin,3.73 ratio,1400 hp axels,boost and air fuel pillar guages. Weld rts 17x10 and 17x4.5 with m and h drag radials and skinnys
|
08-21-2012, 10:09 PM | #4 |
|
definitely must look awesome
__________________
Jannetty Racing JRE Street Package
|
08-21-2012, 10:18 PM | #5 |
bcguy
Drives: 2011 ss/rs m6 Join Date: Nov 2011
Location: british columbia canada
Posts: 507
|
crappy pict you guys just to dark,will upload better in morn
__________________
Agp 62/66 ,lsx 427. , Callie's ,diamond ,all pro ,American racing ,I'ds130s,102 intake and throttle body,etc .fore triple , Turbo 400 level 5 , b and m pro , dss carbon fiber , dss ford 9 inch with strange pumpkin,3.73 ratio,1400 hp axels,boost and air fuel pillar guages. Weld rts 17x10 and 17x4.5 with m and h drag radials and skinnys
|
08-23-2012, 12:18 AM | #6 |
Quit being a pu$$y
|
I think you mean polished, not chrome. To make sure they don't rub you might want to drive around taking some hard corners. That will compress the suspension a lot more that a few guys on the back.
__________________
|
08-23-2012, 12:57 AM | #7 |
|
Congrats, did you have to tie up the e brake cables ? Some have had rubbing.
__________________
2010 Hennessey HPE650 2SSRS Blk/Blk
Magnuson TVS2300,ported heads,cam,Hotchkis suspension. Weld 17”s, Mickey Thompson’s. |
|
|
|
|