You are browsing camaro5 
 |
|
01-29-2014, 02:50 PM
|
#1 |
|
BUMBL Z
|
My 2nd SS badge
I know i posted these pictures a while ago, but i've been lurking through other journals and figured i would post these in here and start my own journal.
Traded in my 2008 Trailblazer SS for her back in the middle of december 2013, so far the only mods are intake/exhaust and lowered, all by the previous owner's doing. here are some pics from when i made the trade and some pics the day after. more to come soon!       
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq  |
|
|
|
01-29-2014, 03:07 PM
|
#2 |
   
Drives: 2010 Camaro SS/RS LS3 Join Date: Apr 2013
Location: Bloomfield Hills, Michigan
Posts: 1,088
|
Great looking car, congrats and Enjoy!
|
|
|
|
|
02-07-2014, 01:30 PM
|
#3 |
|
BUMBL Z
|
gonna be installing my old 2x10 sub box in from my truck after work, might wrap the side markers in vinyl as well. hopefully all goes well
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
|
|
|
|
02-07-2014, 02:46 PM
|
#4 |
     Drives: '11 VR 2LT HHr Join Date: May 2011
Location: Gateway to the West
Posts: 2,721
|
Welcome and Congrats on the 2nd SS
 Former TrailBlazer SS owner here too. Back in Sept '08 it was my 3rd SS. ~
__________________
2011 Hhr
Formerly known as Silver85IrocZ !! |
|
|
|
|
02-07-2014, 03:03 PM
|
#5 |
|
Account Suspended
Drives: 2011 Camaro VR 2SS/RS & Impala Join Date: Apr 2013
Location: Riverside,ca
Posts: 5,342
|
Sweet!
|
|
|
|
|
05-14-2014, 12:47 PM
|
#6 |
|
BUMBL Z
|
Haven't posted in here in a while. I dipped my wheels this weekend with a 1can dip and 1can glossifier per wheel ratio. Also painted the calipers red with G2, applied black brembo decals, and did 3 layers of engine enamel clear over them.
I've also since wrapped the side markers in black vinyl since they were bugging me, added black tail light bezels, and did some interior lighting. Pics        Pics of lighting to come soon! Also plan on either dipping or spraying the CAMARO lettering, the SS badge, and the rear bowtie eventually. Tail light tints and reverse tints will come soon after i do me LED conversion. Stay tuned!
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
|
|
|
|
|
|
|
 |
|
|
