06-04-2020, 06:37 PM | #1 |
|
sway bars & links correct after coilover install?
Does anyone have pictures of their sway bars from underneath the car front to back after dropping at least one inch? Checking to see if mine are installed improperly causing it to be tight in steering.
__________________
Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending
|
06-04-2020, 06:52 PM | #2 |
SoCal Camaro5 Race Team
Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010
Location: SO CAL
Posts: 14,288
|
That’s correct as to the way the link is installed. Being 1” lower won’t affect anything. I don’t know about the steering issue
|
06-04-2020, 07:20 PM | #3 |
Banned
Drives: 2015 Camaro Join Date: Aug 2018
Location: My Garage
Posts: 1,125
|
I'd invest in some adjustable end links so the bar ends don't hang that low.
|
06-05-2020, 06:30 AM | #4 |
Drives: 2015 Z/22 Join Date: Aug 2015
Location: Ontario, Canada
Posts: 931
|
Does look like the bar hangs a bit low from what I remember but I can't picture mine. Looking at some pictures it looks like the bar is tucked up in more as well. Can you rotate the bar inward, toward the back of the car? Shouldn't need adjustable links if lowering an inch or so. I'll take a peak under my car when I get out today, maybe I'm just crazy...
__________________
Overkill/Self Tuned; Mace Camshafts; K&N Typhoon Cold Air Intake; Ported 80mm Throttle Body/Intake Manifolds/Manifold Spacer; Solo Performance High-Flow Cats, Cat-back Exhaust; Vitesse Motorsports Throttle Controller; Elite Engineering E2 Catch Can; BC Racing BR Coilovers; JPSS Delrin Radius Rod Bushing Inserts, Sway Bars; Pegasus Aluminum Rear Cradle Bushings, Camber/Caster Plates; Z/28 Toe Links, Trailing Arms, Upper Control Arm Bushings, Rear Shock Mounts
|
06-05-2020, 03:24 PM | #5 |
|
Thanks guys. These are adjustable. Pedders, 2nd gen links and Sways. I will work to tuck them up. Thank you.
__________________
Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending
|
|
|
|
|