SS with ZL1 exhaust? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ravensrock12 · 01-09-2013, 04:23 PM

I'm looking to buy a 2010 2SS camaro. And I really want the quad tips look but I don't want a custom exhaust done by me or a shop. I was wondering if the corsa cat back exhaust system for a zl1 would fit on my 2010 camaro. Basically if the way the exhaust system is ran is the same on both cars. I know the zl1 comes without the large factory resonators halfway down the undercarriage. Apart from that, are the two exhaust systems the same? Thank you for your help.

Jay_LHD3 · 01-09-2013, 06:39 PM

I don't know but, welcome to the site!!

tramtwo · 01-09-2013, 06:45 PM

There is the issue of the vacuum actuated valves. You could easily get the look the function is more involved.

tramtwo posted this on the go

kevin1106 · 01-09-2013, 06:49 PM

I installed the Corsa ZL1 exhaust on my SS... Simple bolt on install. Took probably an hour to do.

Name: ImageUploadedByTapatalk1357778965.320345.jpg
Views: 10190
Size: 235.5 KB

Name: ImageUploadedByTapatalk1357778965.320345.jpg
Views: 10190
Size: 235.5 KB

Ieatfordsforlunch · 01-09-2013, 07:49 PM

You obviously need the defuses too, just a heads up to include in the cost

camaro-heater · 01-09-2013, 09:42 PM

Quote:

Originally Posted by kevin1106

I installed the Corsa ZL1 exhaust on my SS... Simple bolt on install. Took probably an hour to do.

Attachment 460716

Kevin, see your sig pic in your posts and love your car, very awesome. Just wondering where you got your hood from and what brand. also do you like it pros/cons?

SGT Stretch · 01-09-2013, 10:06 PM

Quote:

Originally Posted by camaro-heater

Kevin, see your sig pic in your posts and love your car, very awesome. Just wondering where you got your hood from and what brand. also do you like it pros/cons?

VFN fiberglass hood i believe. ive heard no complaints from anyone ive talked to about getting it other than the normal aftermarket hood fitiment tweaking.

camaro-heater · 01-09-2013, 10:15 PM

Thanks!!

kevin1106 · 01-09-2013, 11:13 PM

Quote:

Originally Posted by camaro-heater

Kevin, see your sig pic in your posts and love your car, very awesome. Just wondering where you got your hood from and what brand. also do you like it pros/cons?

My hood is a MPD1 hood.... Purchased it from Gary ( orange10s.c. )

I love my hood. Took some getting use to cause of the large cowl, but wasn't a big deal for me.

The 2010 Sin · 01-10-2013, 02:19 PM

I have an SS with ZL1 exhaust but I didnt want the ZL1 diffuser so i went with the NPP diffuser.

Ravensrock12 · 01-10-2013, 04:26 PM

I appreciate all the responses very much! I'm looking to get a corsa aftermarket exhaust. Not the factory dual mode exhaust. Exactly what Kevin did. I think it looks great and probably sounds as good as it looks.

Fast6.3 · 01-10-2013, 07:16 PM

you can also do a regular exhaust and buy the dual tips from solo

The 2010 Sin · 01-11-2013, 03:49 PM

I wish I could hear how it sounds. Heard a BBtriflo ZL1 and it was deeper but exact same volume. so I would be interested in hearing it also.

LS3SuperSport · 01-13-2013, 11:04 AM

Quote:

Originally Posted by kevin1106

My hood is a MPD1 hood.... Purchased it from Gary ( orange10s.c. )

I love my hood. Took some getting use to cause of the large cowl, but wasn't a big deal for me.

Beautiful SS

01-09-2013, 04:23 PM	#1
Ravensrock12 Drives: 1991 camaro rs, 2010 2ss 6M Join Date: Jan 2013 Location: Stevensville, MD Posts: 15	SS with ZL1 exhaust? I'm looking to buy a 2010 2SS camaro. And I really want the quad tips look but I don't want a custom exhaust done by me or a shop. I was wondering if the corsa cat back exhaust system for a zl1 would fit on my 2010 camaro. Basically if the way the exhaust system is ran is the same on both cars. I know the zl1 comes without the large factory resonators halfway down the undercarriage. Apart from that, are the two exhaust systems the same? Thank you for your help.

01-09-2013, 10:15 PM	#8
camaro-heater 22 years of slammin gears Drives: 2010 Camaro SS M6 Join Date: Dec 2012 Location: Texas Posts: 321 View My Garage	Thanks!! __________________ 2010 1SS/RS-M6 > SIM w/matte black stripes. Engine/Performance> Magnuson TVS2300 @ 8lbs-Hennessey CAI-SLP 1 3/4" longtube headers w/ HF cats X pipe SLP Powerflow muffler-QTP dual oval electric cutouts-ZL1 fuel pump-RX catch can-ADM race air scoop,WW relocate-Hurst short throw shifter- Tuned by: Boost Performance *550rwhp/538tq.* Drivetrain> DSS 3.5" aluminum ds-Street Slayer Twin Carbon-IdealG master cylinder-Tick ss clutch line&speed bleeder-GFORCE 1500 Outlaw axles-JRE rear end pkg(LPE 3.70's,true trac,billet main caps)-LPW rear cover-Nitto NT05's. Suspension> Minor stuff/bushings

01-10-2013, 02:19 PM	#10
The 2010 Sin Dont H8 Me Cuz U Aint Me Drives: 2016 SS Sedan, 2017 Explorer Sport Join Date: Feb 2010 Location: Tulsa, Oklahoma Posts: 2,910	I have an SS with ZL1 exhaust but I didnt want the ZL1 diffuser so i went with the NPP diffuser. __________________

01-10-2013, 07:16 PM	#12
Fast6.3 Drives: 2016 2SS coupe 2015 3LT Stingray Join Date: Aug 2012 Location: El paso texas Posts: 880 View My Garage	you can also do a regular exhaust and buy the dual tips from solo __________________ Ported intake manifold and throttle body kooks 2" headers no cats

01-11-2013, 03:49 PM	#13
The 2010 Sin Dont H8 Me Cuz U Aint Me Drives: 2016 SS Sedan, 2017 Explorer Sport Join Date: Feb 2010 Location: Tulsa, Oklahoma Posts: 2,910	I wish I could hear how it sounds. Heard a BBtriflo ZL1 and it was deeper but exact same volume. so I would be interested in hearing it also. __________________

01-09-2013, 06:39 PM	#2
Jay_LHD3 Drives: 2019 F150 RCSB Abyss FX4 Join Date: Aug 2009 Location: Huntsville, AL Posts: 2,277	I don't know but, welcome to the site!!

01-09-2013, 06:45 PM	#3
tramtwo Drives: 2021 1LE Join Date: Jul 2011 Location: N'Awlinz Posts: 6,315	There is the issue of the vacuum actuated valves. You could easily get the look the function is more involved. tramtwo posted this on the go

01-09-2013, 06:49 PM	#4
kevin1106 Drives: 2015 ZO6 3LZ Stage 2 A8 Join Date: Nov 2010 Location: La plata MD Posts: 2,299 View My Garage	I installed the Corsa ZL1 exhaust on my SS... Simple bolt on install. Took probably an hour to do.

01-09-2013, 07:49 PM	#5
Ieatfordsforlunch Drives: 2008 colorado Join Date: Apr 2012 Location: Louisville ky Posts: 377 View My Garage	You obviously need the defuses too, just a heads up to include in the cost

01-10-2013, 04:26 PM	#11
Ravensrock12 Drives: 1991 camaro rs, 2010 2ss 6M Join Date: Jan 2013 Location: Stevensville, MD Posts: 15	I appreciate all the responses very much! I'm looking to get a corsa aftermarket exhaust. Not the factory dual mode exhaust. Exactly what Kevin did. I think it looks great and probably sounds as good as it looks.