01-10-2020, 08:52 PM | #1 |
Drives: 2010 SS M6 Join Date: Aug 2017
Location: Medina TN
Posts: 21
|
Zl1 diff fitment with offset bushings
Any pictures showing what you did to get the ZL1 diff with offset bushings into the cradle for a SS? I know the passenger flange is hitting on front so it will need grinding but top I cannot see clearly where interference is. I've tried using air hammer but cannot make much denting of the cradle.
Really would appreciate any tips and photos of how you got it to fit.
__________________
2010 Camaro SS - TVS2300 - LT Headers - DSX Flex Fuel Sensor - ID1050X
|
01-12-2020, 07:53 PM | #2 |
Drives: 2014 SS Convertible Join Date: Jun 2015
Location: Michigan
Posts: 175
|
Normally you do offset bushings to help the weaker ss axles. With the zl1 diff I’m not sure you need them anymore.
__________________
Engine: LSA Conversion, Ported Heads, 1 7/8 headers, VMS 2.5 Cam, Roto Fab intake, ADM Scoop. BMR engine mounts, 3.91
628/525 Suspension: Koni orange, (BMR everything) 1" drop springs, toe rods, trailer arms, non adjustable LCR, FE4 sway bars, sub frame connectors, delrin sub frame bushing and upper control arm bushings. Front bushings. |
|
|
|
|