02-21-2022, 05:40 PM | #1 |
Drives: Two 1984 Z28 / 2014 2SS/RS AGM L99 Join Date: Feb 2021
Location: WALLER , TEXAS
Posts: 253
|
PHASTEK Washer bottle kit
Has anybody installed one of these ? I have a CAI intake filter and the cover encloses the washer fill . Seems like this would be a good fix .
How difficult to install and does it function well ? Thanks for your input !!! https://www.phastekperformance.com/C...maro-12216.htm Tried in a different forum with no response . Maybe better luck here ...
__________________
2014 2SS/RS AGM L99
CAI Intake ELITE Catch Can POWERSTOP Brakes (5/31/21) Last edited by romcjr; 02-25-2022 at 06:39 AM. |
02-22-2022, 07:56 AM | #2 |
Your Link does not work, but here is mine.
|
|
02-25-2022, 06:45 AM | #3 |
Drives: Two 1984 Z28 / 2014 2SS/RS AGM L99 Join Date: Feb 2021
Location: WALLER , TEXAS
Posts: 253
|
I think I fixed the link .
Thanks for the reply . It looks like your car was disassembled quite a bit making it somewhat easier to install . Any idea how difficult to install on a assembled car ? Thanks
__________________
2014 2SS/RS AGM L99
CAI Intake ELITE Catch Can POWERSTOP Brakes (5/31/21) |
02-25-2022, 07:36 AM | #4 |
It was very much disassembled as I was also doing suspension work. However, if I recall, you could probably do the install by removing the LH tire/wheel and then the Inner Fender Liner. I did have the Front Bumper removed for Halo's, but I don't believe that is necessary to make the cut in the front panel for the duct that comes in the kit.
http://www.phastekperformance.com/v/...structions.pdf http://phastekperformance.com/v/PDF/...ment%20Kit.pdf |
|
02-25-2022, 07:59 AM | #5 |
Drives: 2010 camaro 2SS/RS M6 Join Date: Sep 2014
Location: Pa
Posts: 238
|
Hesster is correct. I didn’t remove my bumper cover for install just wheel and fender liner
I do suggest filling the jug with fluid before install. It’s not vented and an absolute pain to fill
__________________
Texas speed F-35 cam, rollmaster timing set, melling hp pump, ls2 chain damper, fluid damper 25% under drive, Che rocker bushings, tsp .660 lift valve springs, BBK CAI Amzoil filter with Phastek ww relocation and scoop, Gmpp axle back, Speed engineering 1 7/8" LT's no cats, Peak speed shop ported tb, NGK tr6, MSD wires, Amsoil Zrod wix, heritage grill, 1.25" BMR springs, MRR 228, Nitto Nt05,dyno tuned by complete street performance, elite eng catch can, clean side separator, Hurst shifter, Zl1 addon wickerbill
|
02-25-2022, 11:42 AM | #6 |
Drives: Car Join Date: Jan 2013
Location: Alabama
Posts: 1,192
|
What am I missing here? Julio at alkycontrol sells these for $25. Very easy to install.
https://www.alkycontrol.com/shop/mini-tank-32oz |
02-25-2022, 05:01 PM | #7 | |
Drives: Two 1984 Z28 / 2014 2SS/RS AGM L99 Join Date: Feb 2021
Location: WALLER , TEXAS
Posts: 253
|
Quote:
__________________
2014 2SS/RS AGM L99
CAI Intake ELITE Catch Can POWERSTOP Brakes (5/31/21) |
|
02-25-2022, 05:24 PM | #8 |
Drives: Car Join Date: Jan 2013
Location: Alabama
Posts: 1,192
|
It doesn’t replace it, it’s an addition because the wiper fluid reservoir is used for methanol. You use the same pump, mount it under Meath the CAI with a couple of zip toes and there ya go. (I think I had to buy an oem aftermarket pump).
Call Julio and ask him if he’s got one. The website isn’t always up to date. |
02-26-2022, 06:25 AM | #9 | |
Drives: Two 1984 Z28 / 2014 2SS/RS AGM L99 Join Date: Feb 2021
Location: WALLER , TEXAS
Posts: 253
|
Quote:
__________________
2014 2SS/RS AGM L99
CAI Intake ELITE Catch Can POWERSTOP Brakes (5/31/21) |
|
|
|
|
|