12-10-2018, 07:41 AM | #1 |
Drives: 2010 2SS/Black Join Date: Mar 2009
Location: Tucson, AZ
Posts: 608
|
Seat Heater
My Diver Side heated seat decided to stop working. I turn the DS seat heater on, it's stays on about 15 - 20 seconds then shuts off. Anyone experience this?
__________________
2010 Black 2SS L99
Mods: * CAI Intake * Magnuson MP2300 TVS Supercharger/RDS Spacer * Vector Motorsports Tune * Stainless Power LT/Hi Flow Cats/Tru X-* Pipe/36" J-Pipes/40 Series * R1 Concepts ceramic pads and slotted/drilled rotors |
12-10-2018, 09:26 AM | #2 |
Drives: 2010 2SS/Black Join Date: Mar 2009
Location: Tucson, AZ
Posts: 608
|
Did some research online and found that it's most likely one of the seat heater elements. The seat and back heater element cost about $100. Looks like you have to tear the whole seat apart to replace. Maybe a later project......
__________________
2010 Black 2SS L99
Mods: * CAI Intake * Magnuson MP2300 TVS Supercharger/RDS Spacer * Vector Motorsports Tune * Stainless Power LT/Hi Flow Cats/Tru X-* Pipe/36" J-Pipes/40 Series * R1 Concepts ceramic pads and slotted/drilled rotors |
12-10-2018, 09:57 AM | #3 |
Drives: 2012 Camaro SS Join Date: Oct 2016
Location: Greeneville, TN
Posts: 187
|
Just a word of warning its a nightmare to do, I did this for my ss seats and later for my recaros. My ss elements broke on the upper back just above where the seat back pivots. Go slow and take your time and have a nice work space thats padded. Also make sure to leave unconnected for 10-15 before you start tinkering since there is an airbag in the shoulder.
My biggest fear was tearing the old leather, might be worth it to look at what new leather covers cost since your removing them anyways. |
12-10-2018, 07:16 PM | #4 |
|
Maybe a wire got cut/pinched...
http://www.camaro5.com/forums/showthread.php?t=271981
__________________
|
12-14-2018, 08:07 AM | #5 |
Drives: 2010 2SS/Black Join Date: Mar 2009
Location: Tucson, AZ
Posts: 608
|
Thanks for the info!
__________________
2010 Black 2SS L99
Mods: * CAI Intake * Magnuson MP2300 TVS Supercharger/RDS Spacer * Vector Motorsports Tune * Stainless Power LT/Hi Flow Cats/Tru X-* Pipe/36" J-Pipes/40 Series * R1 Concepts ceramic pads and slotted/drilled rotors |
12-14-2018, 08:19 AM | #6 |
Drives: 2010 RS Inferno Orange Metallic Join Date: Mar 2010
Location: Albany, Ga.
Posts: 3,398
|
The wires break in the seat, I just added a Little piece of wire to both and good as new
__________________
PCP Hideaway Headlight Covers, BBK Headers & High Flow Cats, ZL1 Add-ons Wicker Bill, TL1/ZL1 Hood Insert, Gen5 DIY Frameless Mirror, ABL Dash Lighting an My link Navigation, Blacked out Rear Bowtie, all Sylvania led Turn Signals, Ceramic Window Tint By Nicks, MBRP Exhaust tips, GEN5 DIY Virginia Legal DRL Harness, Painted Brake Calipers, Vittesse Throttle Controller, Heritage Grill, Diode Dynamics Led Lighting, Manual Shifter Boot, Paddle Shifters, CNC Throttle Body, Trifecta Tune, RX Catch Can & Breather, Trunk Black out and Side Grills, Chevorlet door Sills.
|
12-24-2018, 10:44 PM | #7 | |
Drives: SUMMIT WHITE 2SS/RS CAMARO Join Date: Feb 2008
Location: 2018: Lakewood Ranch, Fl.
Posts: 8,112
|
Quote:
before and everyone agreed it's a cut wire.
__________________
|
|
|
|
|
|