01-17-2019, 07:50 PM | #1 |
Drives: 2013 Join Date: Mar 2016
Location: Qatar
Posts: 7
|
Oil pressure is low stop the engine now
Hello
I was speeding 230 km/h and suddenly i got oil pressure is low stop the engine now and i heard some noise from the engine and oil pressure gauge is 0 plus I smelled some oil burning if iam not mistaken So what does it mean? Thanks for ur help |
01-17-2019, 07:55 PM | #2 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
You need a new engine.
|
01-17-2019, 09:57 PM | #3 |
=143mph
That’s interesting. Have you been on top of regular maintenance? How many miles on the car?
__________________
416HP, 422TQ. Rotofab CAI, Dyno Tuned. ALP's and a V1. |
|
01-17-2019, 10:37 PM | #4 |
Drives: 2013 Join Date: Mar 2016
Location: Qatar
Posts: 7
|
I do service monthly plus the car is fulley moded
|
01-18-2019, 01:13 AM | #5 |
Drives: 2014 Camaro SS L99 Join Date: Nov 2017
Location: GrandRapids,Michigan
Posts: 225
|
Yep, Sounds like your motor is toast.
__________________
MODS: GPI MAX Package ported and milled heads+(229/250,111 LSA),Johnson 2110 Lifters,BTR .660 Springs,CHE Trunnions,C5R chain,DSX Flex Fuel kit,LSA Injectors,ZL1 Fuel Pump,MAMO Ported MSD Intake manifold,BOWhite ported Throttle body,25% UDP,CAI Intake,Intake Scoop,Kooks 1 7/8 headers,Borla attak catback,Elite catch can,BMR Motor mounts,CircleD 5C 4000-4200 Torque converter,ADM trans cooler,Jannetty Trans dipstick,DSS Aluminum Driveshaft,3.91 Gears,Eaton TrueTrac,JRE Billet caps,BMR Trailing arms,BMR Toe rods,BMR rear sway bar,Pegasus Solid sub frame bushings,DSS 1,000HP Axles
|
01-18-2019, 02:06 AM | #6 |
Drives: 14 and 15 SS's Join Date: Feb 2018
Location: Minneapolis, Minnesota
Posts: 387
|
Have you checked the oil level?
__________________
Bolt-ons!
|
01-18-2019, 05:53 AM | #7 |
Drives: 2013 Join Date: Mar 2016
Location: Qatar
Posts: 7
|
Oil level is normal
|
01-18-2019, 06:23 AM | #8 |
Drives: 2013 ZL1 and 2019 Ram Laramie Join Date: May 2017
Location: Milwaukee
Posts: 1,259
|
|
01-18-2019, 07:30 AM | #9 |
Drives: 2013 Triple Black ZL1 Vert M6 ECF Join Date: Mar 2011
Location: Trenton, Michigan
Posts: 7,047
|
Your oil pump may have failed, or possibly an oil line/fitting/cooler may have failed.
get it to the shop ASAP. Hopefully you shut it down immediately before the engine could seize up. |
01-18-2019, 08:44 AM | #10 |
Drives: 2013 Join Date: Mar 2016
Location: Qatar
Posts: 7
|
I did in lessa than 30 second hopefully lifter or valve
|
01-18-2019, 09:45 AM | #11 |
Drives: 2013 ZL1 M6 Join Date: Sep 2016
Location: CA Bay Area
Posts: 248
|
30 seconds may have been too long. Bearings start eating themselves up once they loose oil pressure. You were pushing the motor at the time of the pressure loss so the motor may be toast.
__________________
Fast 850cc Injectors, ATI Balancer, 8.66 Lower Pulley, 2.55 Upper Pulley, Lingenfelter CAI, Kooks LT with cat delete pipes, Noweeds Exhaust Cutouts (extremely loud under full throttle), BTR Stage 3 Cam, BTR Platinum 660 Valve Spring Kit, TR7ix Iridium Spark Plugs, Lingenfelter Solid Isolator, 160 Degree Thermostat, Larger SC Coolant Reservoir with Hose Relocation Kit, BMR 1.25" Lowering Springs, MGW Short Throw Shifter, Racing Brake 2 piece rotors front and rear, Starkweather Performance Custom Dyno Tune on 91 Octane.
691.38 RWHP 630.35 RWTQ |
01-18-2019, 11:52 AM | #12 | |
|
Quote:
Is this a v6 |
|
01-18-2019, 12:22 PM | #13 |
Drives: 2013 ZL1 and 2019 Ram Laramie Join Date: May 2017
Location: Milwaukee
Posts: 1,259
|
|
01-18-2019, 06:45 PM | #14 |
Drives: 2013 Join Date: Mar 2016
Location: Qatar
Posts: 7
|
|
|
|
|
|