10-23-2018, 01:34 PM | #1 |
Drives: ZL1 Finally Join Date: Aug 2018
Location: Seattle
Posts: 114
|
Passenger door panel doesn't align with dashboard
ZL1 just 1k miles and noticed that passenger door panel doesn't quite align to the dashboard. Is it a normal fit and finish issue with the car? Or does it indicate something more severe like frame issue (not very likely though)?
|
10-23-2018, 01:44 PM | #2 |
2018 ZL1 1LE
Drives: 2018 ZL1 1LE Join Date: Aug 2017
Location: Westfield, IN
Posts: 1,010
|
If anything, this would probably be a door hinge adjustment, but...not sure I would mess with something that minor, but hey, if it bothers you, that's all that matters.
|
10-23-2018, 02:22 PM | #3 |
American Gearhead!!
Drives: ZL1 1LE/GT350/Ford RS/Gen 2 Raptor Join Date: Mar 2013
Location: Merica
Posts: 433
|
While I was dreading going into the garage to check mine as I never noticed this before, but knew it would now bother me forever..I can report that mine is aligned perfectly with the dash, Sorry OP.
|
10-23-2018, 02:36 PM | #4 |
Bannable
|
Take a hammer to the corner of the dash
__________________
One must forego the self to attain total spiritual creaminess, and avoid the chewy chunks of degradation
2017 ZL1 A10 - Hyper Blue Metallic Rotofab CAI, TM ported TB, AWE non res touring catback with PLP's |
10-23-2018, 05:27 PM | #5 |
2018 ZL1 1LE
Drives: 2018 ZL1 1LE Join Date: Aug 2017
Location: Westfield, IN
Posts: 1,010
|
Maybe just a door panel adjustment.. I would check that first.
|
10-23-2018, 05:30 PM | #6 |
Drives: 2012 Porsche 911 Turbo S Join Date: Jan 2017
Location: Los Angeles, CA
Posts: 1,776
|
How do the lines on the actual door look like on the outside?
__________________
IG: 2fast2nick
-- Current -- 2012 Porsche Turbo S - PDK - Basalt Black Metallic -- Past -- 2017 Camaro ZL1 Coupe - Red Hot - A10, PDR - HRE P101 2015 Mustang GT PP - Whipple Supercharger |
10-23-2018, 05:40 PM | #7 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
not sure if I have ever checked this exact location for alignment
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
10-23-2018, 06:01 PM | #8 |
Drives: ZL1 Finally Join Date: Aug 2018
Location: Seattle
Posts: 114
|
Good for you! I will see whether more people will comment on it so that I can decide it is just fit and finish.
|
10-23-2018, 06:05 PM | #9 |
Drives: ZL1 Finally Join Date: Aug 2018
Location: Seattle
Posts: 114
|
|
10-23-2018, 06:05 PM | #10 |
Drives: ZL1 Finally Join Date: Aug 2018
Location: Seattle
Posts: 114
|
|
10-23-2018, 07:09 PM | #11 |
Drives: 2017 ZL1 Join Date: Jun 2012
Location: Graniteville,SC
Posts: 645
|
I'm sure that's within tolerance.
|
10-23-2018, 07:19 PM | #12 |
Drives: 2023 Black ZL1 Auto Join Date: Oct 2009
Location: FEMA Region 4
Posts: 2,935
|
If the door was misaligned that much it would probably be hitting the body somewhere. I don’t know how the door panel attaches to the door or if there is any adjustment possible. The panel may be warped some causing the alignment. I’d have the dealer take a look st it.
|
10-23-2018, 08:44 PM | #13 |
Drives: 2018 Chevrolet Camaro ZL1 Join Date: Jun 2018
Location: DFW
Posts: 199
|
I have the same condition on my 2018. That being said, the dash pieces have been removed and reinstalled to install new speakers and I was wondering if there was a broken clip preventing full seat.
|
10-23-2018, 08:49 PM | #14 |
Drives: 2018 1LT RS V6 A8 Convertible Join Date: Sep 2017
Location: USA
Posts: 497
|
I have seen worse examples as that appears to be an interior hard plastic fit issue and nothing to do with the door alignment. Sadly, the workmanship and quality control on a ZL1 should be better....
|
|
|
Post Reply
|
|
|