01-24-2010, 02:01 AM | #15 |
Drives: 09GT mustang Join Date: Jan 2010
Location: easton,pa
Posts: 15
|
my point is this,like you and some others.I'm one of only a few that has ran the times I'm running with either my parts or hp.It takes mad skills on driving and choosing the right parts.So give credit where credit is do as I would do.I love racing and I love to talk racing.I've had just as many hot GM's as I,ve had Fords and I like them all.I'm not heavy I'm your brother.LOL
__________________
09GT boltons/127200cams/gears/11.99@112 w/1.57 60'330hp318tq
|
01-24-2010, 02:13 AM | #16 |
Drives: 09GT mustang Join Date: Jan 2010
Location: easton,pa
Posts: 15
|
just found out Atco opens Feb.7 test and tune.
__________________
09GT boltons/127200cams/gears/11.99@112 w/1.57 60'330hp318tq
|
01-24-2010, 08:56 AM | #17 |
Drives: 2010 RS/SS2 Join Date: Jul 2009
Location: Forney
Posts: 724
|
You should go look at the fast list here, NO ONE has ran 11's on a stock N/A longblock but me, I'm not even .5 of a tenth from the N/A record, never sent in the updated slip, I think it says .31.
While the other 2 cars here in Texas have finaly out ran me, it took a 427F1R auto car and a 468 w/ a 300 shot and a 4 speed auto to edge me me out by a .001. Im still on the stock CI motor and factory shortblock. Launching techniques play a huge role here, I take off in my car like you do from a redlight, you rev it up and dump the clutch.
__________________
2010 SS/RS SIM
First to run 11's (11.83)on a stock long block. First to run 11's cam only First to run 11's all motor First to run 10's (10.96) and did it with a 100% bonestock long block and a power adder (nitrous) First to run 10's (10.55) on motor in 2010 Camaro First to break into the 5's (5.97) 1/8th mile First to cut a 1.5X sixty foot First to cut a 1.4x sixty foot First to car to cut a 1.3x 60ft |
01-24-2010, 01:58 PM | #18 |
Drives: 09GT mustang Join Date: Jan 2010
Location: easton,pa
Posts: 15
|
when you say peg it and dump it you make it sound easy.if it was peg it and dump it then everyone would be lifting the front wheels and getting great 60's,thats not my launch style FYI.and there is more racers and forums than you and yours,so since theres no getting through to you and your big as Texas attitude I'm done with you.
__________________
09GT boltons/127200cams/gears/11.99@112 w/1.57 60'330hp318tq
|
01-24-2010, 03:29 PM | #19 |
Drives: 2010 RS/SS2 Join Date: Jul 2009
Location: Forney
Posts: 724
|
I just picked up the newest Muscle Mustang, they have a blower car with 520 rwhp and it's running mid 11's, why?
Your car runs low 12's with 300? Braggin about how quick you are with that little of horse power is like bragging about havin a little cock! Want some cheese with that wine?
__________________
2010 SS/RS SIM
First to run 11's (11.83)on a stock long block. First to run 11's cam only First to run 11's all motor First to run 10's (10.96) and did it with a 100% bonestock long block and a power adder (nitrous) First to run 10's (10.55) on motor in 2010 Camaro First to break into the 5's (5.97) 1/8th mile First to cut a 1.5X sixty foot First to cut a 1.4x sixty foot First to car to cut a 1.3x 60ft |
01-24-2010, 05:33 PM | #20 |
Drives: 09GT mustang Join Date: Jan 2010
Location: easton,pa
Posts: 15
|
so like you he or his car is not that good.although he runs around the same as you.my nephew with my same 09 and a e-tech blower 505hp runs 10.90's.and why do you care how big my cock is?
__________________
09GT boltons/127200cams/gears/11.99@112 w/1.57 60'330hp318tq
|
01-24-2010, 06:31 PM | #21 |
Drives: 2010 RS/SS2 Join Date: Jul 2009
Location: Forney
Posts: 724
|
I thought you were done? Lol
my car's driveline is showroom stock, and it cuts better 60fts then yours.
__________________
2010 SS/RS SIM
First to run 11's (11.83)on a stock long block. First to run 11's cam only First to run 11's all motor First to run 10's (10.96) and did it with a 100% bonestock long block and a power adder (nitrous) First to run 10's (10.55) on motor in 2010 Camaro First to break into the 5's (5.97) 1/8th mile First to cut a 1.5X sixty foot First to cut a 1.4x sixty foot First to car to cut a 1.3x 60ft |
01-25-2010, 04:23 AM | #22 |
Drives: 09GT mustang Join Date: Jan 2010
Location: easton,pa
Posts: 15
|
you couldn't even beat my 60' with over 700hp what a joke.my GT500 would spank you.haha
__________________
09GT boltons/127200cams/gears/11.99@112 w/1.57 60'330hp318tq
|
01-25-2010, 08:16 AM | #23 |
Drives: 2010 RS/SS2 Join Date: Jul 2009
Location: Forney
Posts: 724
|
Once again, you have no clue to how I launch, so like I said already, I thought you were through? Lol
I'll be right back with a big ole chunk of cheese!
__________________
2010 SS/RS SIM
First to run 11's (11.83)on a stock long block. First to run 11's cam only First to run 11's all motor First to run 10's (10.96) and did it with a 100% bonestock long block and a power adder (nitrous) First to run 10's (10.55) on motor in 2010 Camaro First to break into the 5's (5.97) 1/8th mile First to cut a 1.5X sixty foot First to cut a 1.4x sixty foot First to car to cut a 1.3x 60ft |
01-25-2010, 12:39 PM | #24 |
Drives: 09GT mustang Join Date: Jan 2010
Location: easton,pa
Posts: 15
|
your right I don't know how you launch,first you said we launch different and then you said we both rev it up and pop it.make up your mind.you also said you can run circles around me and then said you cut better 60's than me.so it's you comparing yourself to me,a 330hp GT I'll take it as a compliment thanks.
__________________
09GT boltons/127200cams/gears/11.99@112 w/1.57 60'330hp318tq
|
01-25-2010, 02:18 PM | #25 |
Drives: 2010 RS/SS2 Join Date: Jul 2009
Location: Forney
Posts: 724
|
Lol,
__________________
2010 SS/RS SIM
First to run 11's (11.83)on a stock long block. First to run 11's cam only First to run 11's all motor First to run 10's (10.96) and did it with a 100% bonestock long block and a power adder (nitrous) First to run 10's (10.55) on motor in 2010 Camaro First to break into the 5's (5.97) 1/8th mile First to cut a 1.5X sixty foot First to cut a 1.4x sixty foot First to car to cut a 1.3x 60ft |
01-25-2010, 02:21 PM | #26 | |
Drives: 2010 RS/SS2 Join Date: Jul 2009
Location: Forney
Posts: 724
|
Quote:
Running circles around you means your car is that slow. Im comparing launch modes, I'd be happy if I had a mustang that ran as fast as yours.
__________________
2010 SS/RS SIM
First to run 11's (11.83)on a stock long block. First to run 11's cam only First to run 11's all motor First to run 10's (10.96) and did it with a 100% bonestock long block and a power adder (nitrous) First to run 10's (10.55) on motor in 2010 Camaro First to break into the 5's (5.97) 1/8th mile First to cut a 1.5X sixty foot First to cut a 1.4x sixty foot First to car to cut a 1.3x 60ft |
|
01-25-2010, 02:24 PM | #27 |
Drives: 2010 RS/SS2 Join Date: Jul 2009
Location: Forney
Posts: 724
|
Is this what your refering too?
__________________
2010 SS/RS SIM
First to run 11's (11.83)on a stock long block. First to run 11's cam only First to run 11's all motor First to run 10's (10.96) and did it with a 100% bonestock long block and a power adder (nitrous) First to run 10's (10.55) on motor in 2010 Camaro First to break into the 5's (5.97) 1/8th mile First to cut a 1.5X sixty foot First to cut a 1.4x sixty foot First to car to cut a 1.3x 60ft |
01-25-2010, 07:49 PM | #28 |
Drives: '10 Camaro SS Join Date: Apr 2009
Location: Gilbert, Arizona
Posts: 1,047
|
LMAO this thread is funny. Here i will help the Mustang Troll out:
Bolt-Ons without Internal Engine Modification 1. OrangeChevy - 11.83 @ 116 mph, (LT, Exhaust, CAI, Tune, Skinny's, Drag Radials), (LS3, M6) 2. GMRULZ - 12.22 @ 113.29 mph, (LT, CAI, Tune), (L99, A6), (DA -648 ft.) 3. Wacker - 12.49 @ 111.57 mph, (LT, Exhaust, Tune, (L99, A6) Internal Engine Mods plus Bolt-Ons 1. Gib - 11.22 @ 125.31 mph, (427 ci, Heads/Cam, LT, Exhaust, CAI, Converter, Tune, (L99, A6) 2. OrangeChevy - 11.37 @ 121.55 mph (Cam, LT, Exhaust, CAI, Tune, Skinny's, DR's), (LS3, M6) 3. MattTuneTime - 11.62 @ 121.62 mph, (Heads/Cam, LT, CAI, Tune, 17'' DR's), (L99, A6) Power Adders 1. OrangeChevy - 10.28 @ 134.26 mph, (Nitrous/200 shot, LT, Exhaust, CAI, Tune, Skinny's, DR's, Tune), (LS3, M6) 2. Larry@SpeedInc - 11.00 @ 126. 70 mph,(Supercharger/TVS 2300, CAI, LT, Exhaust, 18'' wheels, DR's, Tune),(LS3, M6), (DA + 750 ft.) 3. Rick@Livernois - 11.05 @ 125.66 mph, (Supercharger/MP2300, Heads/Cam, LT, Exhaust, DR's, Tune), (L99, A6) http://www.camaro5.com/forums/showthread.php?t=21013
__________________
2010, SIM, 2SS/RS, LS3, CGM Stripes
|
|
|
|
|