Add HUD to your 2010 - Page 32 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Darth Martel · 10-19-2010, 11:11 AM

Just an FYI for people wanting to do this mod. I was just looking at the procedure for simply removing the dash. It is not for the feint of heart. I'm not sure if there's a complete step by step on how to do this as of yet on the forums. If one is needed, let me know and I can put one together. Kudos to 2SSRS for having the patience to do all this work. Not just the leg work in getting the info and parts but, the actual install of this. It will be labor intensive.

skuttduck · 10-19-2010, 11:32 AM

Not to change the subject too much, but it is related.

Do you know if the part number of the dash is stamped someplace on it? I know a guy who has a 2LT 2011. If the number is stamped maybe someone could order just the dash panel from a 2011 and make the template that way.

I did find that 92245012 is the dash itself without the center speaker and 92245011 is with the center speaker.

camarorick · 10-19-2010, 11:42 AM

Quote:

Originally Posted by Darth Martel

Just an FYI for people wanting to do this mod. I was just looking at the procedure for simply removing the dash. It is not for the feint of heart. I'm not sure if there's a complete step by step on how to do this as of yet on the forums. If one is needed, let me know and I can put one together. Kudos to 2SSRS for having the patience to do all this work. Not just the leg work in getting the info and parts but, the actual install of this. It will be labor intensive.

Quote:

Originally Posted by skuttduck

Not to change the subject too much, but it is related.

Do you know if the part number of the dash is stamped someplace on it? I know a guy who has a 2LT 2011. If the number is stamped maybe someone could order just the dash panel from a 2011 and make the template that way.

I did find that 92245012 is the dash itself without the center speaker and 92245011 is with the center speaker.

My understanding was that the metal frame where the HUD will be mounted can be used to cut the hole from underneath ( after removing the cluster, and the HVAC ducts )

skuttduck · 10-19-2010, 12:04 PM

Quote:

Originally Posted by camarorick

My understanding was that the metal frame where the HUD will be mounted can be used to cut the hole from underneath ( after removing the cluster, and the HVAC ducts )

Here's the parts diagram for the HVAC Ducts. I've had the gauges out and there is quite a lot of room there, and you can even reach where the vin panel is at.

Maybe just hand cutting with a utility knife from underneath is all that will need to be done?

2SSRS@Gen5diy · 10-19-2010, 12:11 PM

Guys on Thursday i will have it in and take pics, Its not that hard, But will see.

RipGear · 10-19-2010, 01:56 PM

Keep up the good work.

If it were easy, children would be doing it!

Cam 427 · 10-19-2010, 02:36 PM

Quote:

Originally Posted by skuttduck

Here's the parts diagram for the HVAC Ducts. I've had the gauges out and there is quite a lot of room there, and you can even reach where the vin panel is at.

Maybe just hand cutting with a utility knife from underneath is all that will need to be done?

Do you recall seeing any type of mounting points for the HUD?

2SSRS@Gen5diy · 10-19-2010, 04:36 PM

Its hard to tell as the screws are small, By the way i have a part # for a 2011 camaro with the dash # 20966085.

GM PART # 20966085
CATEGORY: Dash Pad (shipped only to local FedEx hub 4 pickup)
PACK QTY: 1
CORE CHARGE: $0.00
GM LIST: $517.66
OUR PRICE: $300.97

jeepguy_1980 · 10-19-2010, 05:57 PM

Quote:

Originally Posted by 2SSRS

Its hard to tell as the screws are small, By the way i have a part # for a 2011 camaro with the dash # 20966085.

GM PART # 20966085
CATEGORY: Dash Pad (shipped only to local FedEx hub 4 pickup)
PACK QTY: 1
CORE CHARGE: $0.00
GM LIST: $517.66
OUR PRICE: $300.97

The price doesn't seem bad, but the work seems like it would be a lot.

DWALEX · 10-19-2010, 06:42 PM

Quote:

Originally Posted by 2SSRS

Its hard to tell as the screws are small, By the way i have a part # for a 2011 camaro with the dash # 20966085.

GM PART # 20966085
CATEGORY: Dash Pad (shipped only to local FedEx hub 4 pickup)
PACK QTY: 1
CORE CHARGE: $0.00
GM LIST: $517.66
OUR PRICE: $300.97

we need to buy it?

formare · 10-19-2010, 06:54 PM

I'm in - but only after a detailed picture step by step...

2SSRS@Gen5diy · 10-19-2010, 07:57 PM

There will be some on Thursday.

camaro4mybday · 10-19-2010, 08:14 PM

parts ordered!

franknbeans · 10-19-2010, 08:18 PM

nice. . . keep us updated. Like I said, I'm in 100%

10-19-2010, 11:32 AM	#436
skuttduck Drives: 2010 RJT 2LT Camaro Join Date: May 2009 Location: East Lansing, MI Posts: 2,530	Not to change the subject too much, but it is related. Do you know if the part number of the dash is stamped someplace on it? I know a guy who has a 2LT 2011. If the number is stamped maybe someone could order just the dash panel from a 2011 and make the template that way. I did find that 92245012 is the dash itself without the center speaker and 92245011 is with the center speaker. __________________ Check out my Camaro http://www.camaro5.com/forums/showthread.php?t=84133

10-19-2010, 01:56 PM	#440
RipGear Drives: '74 Vette Coupe Join Date: Jun 2009 Location: Missouri City, Texas Posts: 104	Keep up the good work. If it were easy, children would be doing it! __________________ 1974 Chevrolet Corvette Coupe, L82 V8, A3 2005 Craftsman Push Mower, I1, M1 2006 Kia Sportage LX, V6, A4 2006 Troy-Bilt Weed Eater, I1 4-Stroke, M1 2010 Camaro #64281, 2SS/RS, L99, RJT, Black Leather, Black Rallys

10-19-2010, 06:54 PM	#445
formare The Milano Drives: 2017 Firefly ShipWorks Join Date: Jun 2010 Location: Chicagoland (Crown Point, IN) Posts: 1,877 View My Garage	I'm in - but only after a detailed picture step by step... __________________ My first Love. She was called "Miss Carriage" (still cry when I think about her) 383, Muncie 4 speed, custom linkage mated to hurst short throw shifter.

10-19-2010, 08:18 PM	#448
franknbeans Whipped Drives: 2010 CAMARO Join Date: Sep 2008 Location: Pittsburgh-ish - PA Posts: 4,216 View My Garage	nice. . . keep us updated. Like I said, I'm in 100% __________________ Car of the week 7/7/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Cosmetics and Lighting Modification Discussions	36	04-02-2020 05:32 PM
February 2010 Camaro production & sales figures. Tops Mustang for 9th straight month!	Tran	5th Gen Camaro SS LS LT General Discussions	52	03-03-2010 09:39 PM
DEALER ONTARIO CANADA WE SHIP ANYWHERE IN CANADA 2010 CAMAROS FOR SALE IN STOCK NOW!	dz	Dealer Camaros for Sale	0	03-03-2010 05:43 PM
Zex Nitrous System for 2010 Camaro SS @ BMC Performance!	Kris@BMCPerformance	Forced Induction	2	02-18-2010 06:59 PM
2010 Chevrolet Camaro makes finalist list for 2010 World Car Design of the Year	Tran	5th Gen Camaro SS LS LT General Discussions	37	02-17-2010 04:22 PM

10-19-2010, 11:11 AM	#435
Darth Martel Darth Martel Drives: Black 1SS with 20% tinted windows Join Date: May 2009 Location: Bizzaroland Posts: 1,496	Just an FYI for people wanting to do this mod. I was just looking at the procedure for simply removing the dash. It is not for the feint of heart. I'm not sure if there's a complete step by step on how to do this as of yet on the forums. If one is needed, let me know and I can put one together. Kudos to 2SSRS for having the patience to do all this work. Not just the leg work in getting the info and parts but, the actual install of this. It will be labor intensive.

10-19-2010, 12:11 PM	#439
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Guys on Thursday i will have it in and take pics, Its not that hard, But will see.

10-19-2010, 04:36 PM	#442
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Its hard to tell as the screws are small, By the way i have a part # for a 2011 camaro with the dash # 20966085. GM PART # 20966085 CATEGORY: Dash Pad (shipped only to local FedEx hub 4 pickup) PACK QTY: 1 CORE CHARGE: $0.00 GM LIST: $517.66 OUR PRICE: $300.97

10-19-2010, 07:57 PM	#446
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	There will be some on Thursday.

10-19-2010, 08:14 PM	#447
camaro4mybday "Camaro Joe" Drives: 2010 SILVER ICE 2LT/RS CAMARO Join Date: Feb 2010 Location: long island ny Posts: 2,366	parts ordered!