Best Braided Brake line kit for a 14 2SS Manual. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Joe.G · 05-22-2022, 05:09 PM

I am looking for Braided Brake lines front and rear, what is the best fitting kit out there? Thanks

demonspeed · 05-22-2022, 07:10 PM

My stop tech have been fine.

SIM GhostrdrZ · 05-23-2022, 12:26 AM

Spiegler brakes lines.

Leadsled · 05-23-2022, 11:51 AM

i have stoptech too!

CamaroCracka · 05-23-2022, 02:12 PM

Goodridge went in easy when I did the ZL1 upgrade.

SS Performance · 05-23-2022, 05:48 PM

Quote:

Originally Posted by CamaroCracka

Goodridge went in easy when I did the ZL1 upgrade.

+1

Joe.G · 05-23-2022, 08:12 PM

What about these?
https://www.phastekperformance.com/R...ines-5blbl.htm

I read I can order ones for ZL1 and use them on SS or ZL1 Calipers? But not the other way around?

demonspeed · 05-24-2022, 07:04 AM

I’ve not looked into the specs that deeply, but if that’s correct, then just get the ZL1 kit because then you’ll be prepared if you decide to upgrade to ZL1/Z06 six pistons.

Coz3z3 · 05-24-2022, 08:20 AM

Quote:

Originally Posted by SIM GhostrdrZ

Spiegler brakes lines.

Spiegler for me as well

bannonm · 05-24-2022, 08:05 PM

Quote:

Originally Posted by Joe.G

What about these?
https://www.phastekperformance.com/R...ines-5blbl.htm

I read I can order ones for ZL1 and use them on SS or ZL1 Calipers? But not the other way around?

ZL1 brake lines for the fronts are longer. If you swap SS Brembos out for ZL1/1LE 6 pot the stock SS lines are too short. And I like Goodridge, have mine for 11 years and track use. Not saying other aren't good, but I know they work.

Joe.G · 05-24-2022, 09:15 PM

So the only difference in the kits is the Front ZL1 are longer?

bannonm · 05-25-2022, 09:28 AM

Quote:

Originally Posted by Joe.G

So the only difference in the kits is the Front ZL1 are longer?

Yes, on the SS caliper the connection is made near the top of the caliper. The ZL1 front caliper the connection is toward the bottom of the caliper. The flexible part of the brake line starts from the frame and connects to the support on the strut, then from there goes down to the connection port on the caliper. So the brake line sort of flows down from the frame to the caliper. Since the ZL1 connection port is lower, the line has to be slightly longer. The banjo connections are pretty much the same size. The stock ones on a '11 are square and Goodridge are round on my ZL1 and SS lines, but it's the inside diameter that matters.

Joe.G · 05-25-2022, 06:58 PM

Do the Goodrich lines have a sleeve/Coating over the braided part

demonspeed · 05-25-2022, 07:12 PM

Quote:

Originally Posted by Joe.G

Do the Goodrich lines have a sleeve/Coating over the braided part

That’s pretty standard on any braided lines I’ve ever seen for any car.

05-22-2022, 05:09 PM	#1
Joe.G Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021 Location: NY Posts: 1,264	Best Braided Brake line kit for a 14 2SS Manual. I am looking for Braided Brake lines front and rear, what is the best fitting kit out there? Thanks __________________ GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount.

05-22-2022, 07:10 PM	#2
demonspeed not afraid of the wall Drives: Camaros Join Date: Apr 2010 Location: Pittsburgh Posts: 2,148	My stop tech have been fine. __________________ 2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT 10/13/22: 1100 Past Camaros: 13 1LE\|02 SS\|01 Z28\|00 SS\|91 1LE\|91 Z28\|89 IROC-Z

05-23-2022, 02:12 PM	#5
CamaroCracka Drives: 2010 Turbo LS3 Join Date: Dec 2009 Location: Palm Bay, FL Posts: 2,734	Goodridge went in easy when I did the ZL1 upgrade. __________________ 2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes. 2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes.

05-23-2022, 08:12 PM	#7
Joe.G Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021 Location: NY Posts: 1,264	What about these? https://www.phastekperformance.com/R...ines-5blbl.htm I read I can order ones for ZL1 and use them on SS or ZL1 Calipers? But not the other way around? __________________ GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount.

05-24-2022, 07:04 AM	#8
demonspeed not afraid of the wall Drives: Camaros Join Date: Apr 2010 Location: Pittsburgh Posts: 2,148	I’ve not looked into the specs that deeply, but if that’s correct, then just get the ZL1 kit because then you’ll be prepared if you decide to upgrade to ZL1/Z06 six pistons. __________________ 2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT 10/13/22: 1100 Past Camaros: 13 1LE\|02 SS\|01 Z28\|00 SS\|91 1LE\|91 Z28\|89 IROC-Z

05-23-2022, 12:26 AM	#3
SIM GhostrdrZ Drives: ‘14 Z/28 ‘14 ZL1 M6 vert Join Date: Jul 2015 Location: Ohio Posts: 1,283 View My Garage	Spiegler brakes lines.

05-23-2022, 11:51 AM	#4
Leadsled Drives: 2010 Camaro SS 6MT Join Date: Sep 2021 Location: Columbia Posts: 215 View My Garage	i have stoptech too!

05-24-2022, 09:15 PM	#11
Joe.G Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021 Location: NY Posts: 1,264	So the only difference in the kits is the Front ZL1 are longer? __________________ GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount.

05-25-2022, 06:58 PM	#13
Joe.G Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021 Location: NY Posts: 1,264	Do the Goodrich lines have a sleeve/Coating over the braided part __________________ GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount.