06-03-2020, 08:47 PM | #71 |
Drives: 2010 Synergy Green Camaro 1LT Join Date: Jun 2019
Location: Orlando
Posts: 201
|
Any pics of the work they did?
|
06-04-2020, 06:31 AM | #72 |
Drives: SUMMIT WHITE 2SS/RS CAMARO Join Date: Feb 2008
Location: 2018: Lakewood Ranch, Fl.
Posts: 8,112
|
I live in South Florida. The A/C on my 11 year old SS is fine. I have a question:
As I use my A/C all year so is it possible to just leave this door in one position and not use it? Which control knob should I not touch and just leave the A/C on all the time. I never need heat. Thanks.
__________________
|
06-04-2020, 12:17 PM | #73 |
Chevy Enthusiast.
Drives: 2015 Camaro ZL1 Summit White Join Date: Jan 2019
Location: Calgary Area, Alberta
Posts: 221
|
There's some evidence (video) that supports 3 clicks from the extreme left position of the temperature control knob on the right side of the controls.
__________________
Levon H. Bone Stock |
06-05-2020, 06:43 AM | #74 |
Banned
Drives: 2015 Camaro Join Date: Aug 2018
Location: My Garage
Posts: 1,125
|
3 clicks from the blue dot will keep it from slamming shut which should help the blend door from cracking near the actuator side mount.
|
06-05-2020, 05:18 PM | #75 |
Obsessed
Drives: 2016 Hyper Blue 2SS RS Join Date: Jun 2011
Location: Riverview, FL
Posts: 2,601
|
They quoted me up front. $709 and change.
Appear to have done a good job, it works, and was a hell of a lot cheaper than a dealer.
__________________
2016 Hyper Blue 2SS |
06-05-2020, 05:24 PM | #76 |
Obsessed
Drives: 2016 Hyper Blue 2SS RS Join Date: Jun 2011
Location: Riverview, FL
Posts: 2,601
|
I assume you were asking that of me.
No pictures, too tight up there and the big electrical connector is in the way, as well as a vent. It is duct taped all around to seal, and I assume it is glued back in place as well, but don't really know. If you are over on this coast, you can drop by to see it. They supposedly can do this repair in one day at Christian Bros, but I would confirm and make sure they know you are coming from Orlando, so pre-order the part. (the dealer they bought the part from sent the actuator instead of the door, so it cost me an extra day) Jim PM me if you have a specific question I may be able to answer. I think they did a great job, Ferman Chevy in Tampa wanted $1400 plus parts, so I imagine it would have been about 16-1700.
__________________
2016 Hyper Blue 2SS |
06-14-2020, 08:33 PM | #77 |
Stigs Bahraini Cousin
|
Lucky i never use heat, i never even touch the control knob. It always sits at max holding the blend door on one position for all of it's life.
If it breaks for any reason, I'll cut a hole instead of removing the dash and windshield.
__________________
2015 CAMARO 1LE
|
05-21-2021, 02:18 AM | #78 |
Drives: camaro Join Date: May 2021
Location: london
Posts: 3
|
You talk sense. Unfortunately, the car will never be the same after this procedure. The dealers usually create more problems than solve anything. And moreover, they usually ask for an extraordinary fee which doesn't make sense at all! Crazy guys. So after visiting dealers, I usually have this idea of selling my car ASAP because it turns out to be very expensive. But one day I got lucky because my pal discovered the existence of socool.sg that provides aircon services in Singapore. I found on their website some useful information about common AC errors and problems as well as their contact number. In general, it was a nice experience working with them. br {mso-data-placement:same-cell;}
Last edited by WantedPzen; 05-23-2021 at 02:54 PM. |
06-02-2021, 12:05 PM | #79 |
Drives: 2014 1SS "Stock" Join Date: Apr 2021
Location: Las Vegas
Posts: 11
|
I have a 2014 SS...blend door cost me $200 to replace no windshield removal
I am in Mountains Edge, I had a guy do my blend for $200 plus the $29 part
|
10-12-2023, 08:39 AM | #80 |
Drives: 2012 2LT/RS Join Date: Oct 2011
Location: Northeast
Posts: 1,443
|
|
10-12-2023, 08:40 AM | #81 | |
Drives: 2012 2LT/RS Join Date: Oct 2011
Location: Northeast
Posts: 1,443
|
Quote:
|
|
|
|
|
|