01-11-2018, 12:31 PM | #1 |
Drives: 2013 Camaro SS 6-Speed Join Date: Nov 2017
Location: Lansdale,PA
Posts: 406
|
BMR Spring Options
I'm sure this has been brought up before but I've been shopping around for the bmr drop springs. I originally was going to go with 1.4'' all around but started to worry the rear was going to look lower than the front with an even drop. So I looked into the 1.25'' drop for the rear so it would be 1.4'' in the front and 1.25'' in the rear. Has anyone done this setup? Any input is much appreciated!
If you have pics of your camaro dropped 1.4'' or 1.4''x1.25'' please post below!!!
__________________
2013 Camaro 1SS 6-Speed LS3 All stock.. For now... |
01-11-2018, 01:16 PM | #2 |
Drives: 2015 Z/22 Join Date: Aug 2015
Location: Ontario, Canada
Posts: 931
|
The rear already sits higher than the front so wouldn't you want to do 1.25" front and 1.4" rear? I went with Eibach Pro-Kit springs which are 1.0" front and 1.3" rear which more or less evens out the ride height front to back.
Edit: if memory serves, BMR has 1.0" springs as well, so you could maybe do 1.0" front and 1.25" rear if you're looking to even out ride height.
__________________
Overkill/Self Tuned; Mace Camshafts; K&N Typhoon Cold Air Intake; Ported 80mm Throttle Body/Intake Manifolds/Manifold Spacer; Solo Performance High-Flow Cats, Cat-back Exhaust; Vitesse Motorsports Throttle Controller; Elite Engineering E2 Catch Can; BC Racing BR Coilovers; JPSS Delrin Radius Rod Bushing Inserts, Sway Bars; Pegasus Aluminum Rear Cradle Bushings, Camber/Caster Plates; Z/28 Toe Links, Trailing Arms, Upper Control Arm Bushings, Rear Shock Mounts
|
|
|
Tags |
bmr, bmr 1.4 |
|
|