SS Grille Emblem Removal ? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ryeguycamaro · 12-20-2009, 01:41 PM

How do you remove the red ss emblem from the grille? I have removed the bowtie and made a new holder for the trailblazer ss emblems and don't want the red ss emblem on in the grille with the new one installed.

TommyTSquared · 12-20-2009, 02:51 PM

I am curious about this as well. I was going to look into it when I went home for the holidays.

Just found this digging around some other threads. Thanks to Mr Smith:

Quote:

The rear SS badge is glued and comes off the same as the side badges. The front SS is clipped into the grill. You have to get one hand in behind it and get to the hanger to push the clips and the other hand in the front to pull the emblem out.

onechuck · 12-21-2009, 07:38 AM

There is a little plastic tab that is a part of the front grill so whatever you do don't just pull on the SS emblem because you will break it. The SS emblem is held on with double sided tape. Get you some fishing line and run it behind the emblem carefully and it will come right off. Then just clean the little tab up and you are good to go.

Dboy23 · 12-21-2009, 11:22 AM

It's actually pretty hard, and a pain to get back into place. There's tabs on the back (hard to get to and hard to remove) you can use a flat head screw driver on the right side and push it in with your finger from the left, I'd suggest doing the left first.

SicSix6 · 12-31-2009, 09:27 AM

2SSRS@Gen5diy · 12-31-2009, 09:47 AM

Is this the pics you want

Mzodarg · 12-31-2009, 02:55 PM

Quote:

Originally Posted by 2SSRS

Is this the pics you want

2SS,
Where did you get the SS from- Love it. Gotta have it.

Mike

2SSRS@Gen5diy · 12-31-2009, 05:26 PM

Quote:

Originally Posted by Mzodarg

2SS,
Where did you get the SS from- Love it. Gotta have it.

Mike

Hi mike its the one from the SS impala but to put it on the front you need the fill part from SLP.

Mzodarg · 12-31-2009, 06:41 PM

Quote:

Originally Posted by 2SSRS

Hi mike its the one from the SS impala but to put it on the front you need the fill part from SLP.

Any chance you could direct me to the corrct part numbers/ were to purchase for both.

Thanks,
Mike

2SSRS@Gen5diy · 12-31-2009, 06:48 PM

Yes SR.
There are 2 parts there first is the SLP filler part for your grill, part #100032A it like $35.

Next is the SS emblem the same one as on the rear Its from your GM dealer, This is the Part # 15211285 and i paid $15 per.

Mzodarg · 12-31-2009, 07:06 PM

2SSRS,
Thanks, my brother!

Mike

Mzodarg · 12-31-2009, 07:13 PM

2SSRS,
After looking at SLP performance- There are two Part numbers for the filler One is 100032A, the other is 100033A the PN 100042A that you provided is the old school SS emblem. Do you know what one of the fillers you used?

Thanks,
Mike

DangerZL1 · 12-31-2009, 07:14 PM

It looks great and should have come this way from the factory!

2SSRS@Gen5diy · 01-01-2010, 03:39 AM

Quote:

Originally Posted by Mzodarg

2SSRS,
After looking at SLP performance- There are two Part numbers for the filler One is 100032A, the other is 100033A the PN 100042A that you provided is the old school SS emblem. Do you know what one of the fillers you used?

Thanks,
Mike

Yes you are right long two days and was late to go out for new years party,
The Right part # for the SLP is # 100032A

12-21-2009, 11:22 AM	#4
Dboy23 2G1FB1EV7A9100028 Drives: 2010 Jeep Wrangler Hemi Join Date: Mar 2009 Location: Michigan Posts: 882	It's actually pretty hard, and a pain to get back into place. There's tabs on the back (hard to get to and hard to remove) you can use a flat head screw driver on the right side and push it in with your finger from the left, I'd suggest doing the left first. __________________ # 28 - Victory Red 1LT/RS (SOLD)

12-31-2009, 09:27 AM	#5
SicSix6 The Demon Photographer Drives: 2010 1SS IOM Camaro Join Date: May 2009 Location: Bristow, VA Posts: 756 View My Garage	__________________ 1SS IOM LS3, GM 4-pack guages, SLP SS Front Emblem, Roto-Fab CAI, Solo Performance Mach X Exhaust, Barton Industries Short Throw Shifter

12-31-2009, 09:47 AM	#6
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Is this the pics you want Attached Images

12-31-2009, 07:06 PM	#11
Mzodarg Remembering those in Blue Drives: 2010 Camaro 2SS Blk w/IOM Int Join Date: Sep 2009 Location: Oklahoma Posts: 479	2SSRS, Thanks, my brother! Mike __________________ SOLD. www.harleytechtalk.org

12-31-2009, 07:13 PM	#12
Mzodarg Remembering those in Blue Drives: 2010 Camaro 2SS Blk w/IOM Int Join Date: Sep 2009 Location: Oklahoma Posts: 479	2SSRS, After looking at SLP performance- There are two Part numbers for the filler One is 100032A, the other is 100033A the PN 100042A that you provided is the old school SS emblem. Do you know what one of the fillers you used? Thanks, Mike __________________ SOLD. www.harleytechtalk.org

12-20-2009, 01:41 PM	#1
ryeguycamaro Drives: 1969 RS/SS 2010 SS/RS Join Date: Aug 2009 Location: USA Posts: 118	SS Grille Emblem Removal ? How do you remove the red ss emblem from the grille? I have removed the bowtie and made a new holder for the trailblazer ss emblems and don't want the red ss emblem on in the grille with the new one installed.

12-21-2009, 07:38 AM	#3
onechuck Onechuck Drives: 2010 Camaro IBM 2SS\RS SC & Cammed Join Date: May 2009 Location: White Oak Tx Posts: 503	There is a little plastic tab that is a part of the front grill so whatever you do don't just pull on the SS emblem because you will break it. The SS emblem is held on with double sided tape. Get you some fishing line and run it behind the emblem carefully and it will come right off. Then just clean the little tab up and you are good to go.

12-31-2009, 06:48 PM	#10
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Yes SR. There are 2 parts there first is the SLP filler part for your grill, part #100032A it like $35. Next is the SS emblem the same one as on the rear Its from your GM dealer, This is the Part # 15211285 and i paid $15 per. Last edited by 2SSRS@Gen5diy; 01-01-2010 at 03:41 AM. Reason: Had the # for the part

12-31-2009, 07:14 PM	#13
DangerZL1 Drives: 2023 Black ZL1 Auto Join Date: Oct 2009 Location: FEMA Region 4 Posts: 2,935	It looks great and should have come this way from the factory!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SS vs Z. Why?? Not another Z28 Thread!! Just curious.	TRIXXTERR	General Automotive + Other Cars Discussion	29	01-21-2011 09:27 AM
SS ENGINE COVER EMBLEM & NAMEPLATE 2010 CAMARO	Kirban Performance	V8 Bolt-Ons & Tunes	0	11-30-2009 01:40 PM
Camaro SS manual shipment (not production) hold officially confirmed by GM (UPDATED)	Tran	5th Gen Camaro SS LS LT General Discussions	715	07-23-2009 11:05 PM
Camaro LS / LT / RS / SS specs and options!	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	119	09-02-2008 09:46 PM