03-18-2013, 07:17 PM | #1 |
Drives: Hearse Join Date: Nov 2011
Location: US
Posts: 255
|
power braking
hmmm My 2012 2ss/rs will not power brake. If i hold the brake down just enough to stop the vehicle from rolling and try to spin the rear tires i dont get any RPM untill i let off the brake. even in comp mode.
|
03-18-2013, 07:45 PM | #2 |
Drives: 2012 IBM 2SS Vert. Join Date: Dec 2011
Location: Tequesta, Fl.
Posts: 784
|
Take traction control all the way off. Hold for 6-7 seconds, both lights come on, let er rip!
__________________
LS3/M6 K&N, VMAX throttle body, RX Catch Can, skip shift eliminator, DT shorties and Solo HFC, DRL harness and 5K LED DRL, ZL1 rear sway, 1LE front sway
|
03-18-2013, 08:17 PM | #3 |
Camaro CRAZY
|
|
03-18-2013, 09:07 PM | #4 |
Drives: Hearse Join Date: Nov 2011
Location: US
Posts: 255
|
i hold it down for 10 seconds nothing if i press it twice both lights come on
|
03-18-2013, 09:32 PM | #5 |
Troy
Drives: 2010 2ss/rs custom viper blue Join Date: Nov 2012
Location: Elmore,Ohio
Posts: 106
|
Buy a line lock and at least save the rear brakes
|
03-18-2013, 10:19 PM | #6 |
Like they said, hold the button down, everything will light up on the dash, then MASH! Really not much braking even required unless u just wanted to smoke out the hood.
__________________
MODS:
COMP CAMS 231/247 113LS, LG LTs and 3" exhaust, Pfadt springs and sways, BMR TA's and bushings, Elite catch can, Holley Coil covers, heater hose re-route and fuel rail swap..... |
|
03-18-2013, 10:22 PM | #7 |
Drives: Hearse Join Date: Nov 2011
Location: US
Posts: 255
|
|
03-18-2013, 11:31 PM | #8 |
Drives: 2013 2SS/RS L99 Join Date: Oct 2012
Location: Denham Springs La.
Posts: 811
|
Hold it and the 2 lights will come on, one after the other.
__________________
2013 2SS/RS L99/A6 Crystal Red Metallic Tincoat 12.76@108.98mph Bone Stock
12.46@111.19mph with New Era CAI & U/D Pulley 12.12 @ 114.16 after Stainless Power headers and no tune yet on stock P-Zero's! 12.007@ 115.20 With 18" Drag Radials - 11.93 @115.19 Added a PTB 11.76 @116.59 With Yank SS3200 Converter - 11.63 @116.52 After PI and Tuning 11.44 @118.75 New Best 10.72 @127.93 after heads and Cam and Yank SS3600 |
03-19-2013, 07:10 AM | #9 |
Drives: Hearse Join Date: Nov 2011
Location: US
Posts: 255
|
|
03-19-2013, 07:18 AM | #10 |
Account Suspended
Drives: nothing Join Date: Nov 2010
Location: a hole
Posts: 17,906
|
I did my first standard trans' powerbrake burnout on my Camaro. Before only in automatics.
|
03-19-2013, 07:33 AM | #11 |
Drives: C6 Z06 Join Date: Jan 2010
Location: Dayton, MD
Posts: 1,645
|
|
03-19-2013, 07:35 AM | #12 | |
Drives: Hearse Join Date: Nov 2011
Location: US
Posts: 255
|
Quote:
|
|
03-19-2013, 07:36 AM | #13 |
Drives: Hearse Join Date: Nov 2011
Location: US
Posts: 255
|
Im gonna go do it right now this is bugging me.
|
03-19-2013, 07:41 AM | #14 |
Drives: 2011 Silverado, 2011 2SS/RS Conv Join Date: Dec 2009
Location: Kentucky
Posts: 108
|
Well, did it work?
|
|
|
|
|