03-12-2015, 06:01 PM | #6553 |
Buick 455 Fan
Drives: 1970 Buick, 2012 1SS LS3 Join Date: Jun 2010
Location: Boston MA
Posts: 5,957
|
I mean that they will tell you it was built by Walther's toy factory (slightly true in a way, actually, my info is it is partly made in their sporting goods division instead of the same place that will make say a P99), they will tell you it is a Zamak piece of shit, it is a jam-o-matic, etc etc etc.
I find that mine works as advertised. With bulk .22LR I get about 10-12 FTF per box of 525. Dunno about being a target pistol though, even though I got to be quite accurate with mine. It's certainly no match for say a Ruger MKII or MKIII re: accuracy. Mine has both barrels and both slides. I never used the longer barrel but once, I found no appreciable accuracy difference. My own feeling is that an interference between the extension, barrel, and slide contribute to the slide cracking issues people cite. I bought mine because it was a small pistol with a short sight radius and I reasoned this would exaggerate things I was doing wrong while shooting. I think it made me a better shot for sure. I recommend heeding the manufacturer's advice about using high velocity ammunition in it exclusively. Mine loves CCI minimag and likes Remington Golden Bullet. Winchester Wildcat is about as good as RGB in my P22 but very dirty. I also recommend using a dry lube instead of oil.
__________________
|
03-12-2015, 10:00 PM | #6554 | |
Emerald Coast Camaros
Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009
Location: Tallahassee FL
Posts: 9,687
|
Quote:
Do have one more question about this gun, where do you recommend to buy a second mag for it? Was going to check my local stores, but I highly doubt they will have it. |
|
03-13-2015, 05:54 PM | #6555 |
Buick 455 Fan
Drives: 1970 Buick, 2012 1SS LS3 Join Date: Jun 2010
Location: Boston MA
Posts: 5,957
|
Second mags...I went to a gun show and bought extras. Walther units, "B" suffix. Supposedly, the "A" mags were problems. Wouldn't you know, both my A mags work great, the Bs are trouble in mine. My P22 was made in 2002
Ordering them from Smith&Wesson might be pricey. You might just have to keep your eyes open; I don't see them around here often either.
__________________
|
03-14-2015, 07:58 PM | #6556 |
Drives: 2015 Challenger SRT Join Date: May 2011
Location: Roy, UT
Posts: 1,002
|
So I picked up a new toy this weekend!
It was on sale and luckily the wife wasn't too mad. Anyway it's a brand spanking new Magnum Research Desert Eagle .50 AE! Holy crap this thing is awesome! Pretty good recoil, but it's manageable. My .357 Mag Revolver hurts my hands when I shoot it and this doesn't hurt or feel uncomfortable at all. Last edited by PsychoZL1; 03-18-2015 at 11:12 PM. |
03-18-2015, 05:14 PM | #6557 | |
Emerald Coast Camaros
Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009
Location: Tallahassee FL
Posts: 9,687
|
Quote:
|
|
03-21-2015, 04:25 AM | #6558 | |
Pro Hide n Seek Player
Drives: 2010 SS LS3/LSA 620whp/630tq Join Date: May 2009
Location: Tucson, AZ
Posts: 921
|
Quote:
__________________
620whp/630wtq. ADM LSA Conversion, E85, PFADT Tri-Y Headers into Borla S, PFADT Swaybars, Springs, Links, 20x10 20x11 Forgestar F14s, Lots of AAC |
|
03-25-2015, 08:51 PM | #6559 |
General Motors Aficionado
Drives: 2023 GMC Canyon, 2020 Colorado Join Date: Aug 2008
Location: Florida
Posts: 37,371
|
S&W M&P Shield 9mm.
Thoughts?
__________________
2023 GMC Canyon Elevation 2020 Chevrolet Colorado W/T Extended Cab (State-issued) |
03-25-2015, 09:05 PM | #6560 | |
Captain Gingerbeard
Drives: 2012 IOM RS/SS 6MT Join Date: Feb 2013
Location: West Twin Cities, MN
Posts: 2,489
|
Solid pistol, but get a Springfield XD-S in 9mm instead. Thinner, and shoots better, IMO. MUCH better trigger.
__________________
Custom ordered 2012 6MT RS/SS on 11/25/2011. Picked up 01/31/12.
Pedders Coilovers, BMR trailing arms and toe-links, Prothane solid poly subframe bushings, JDP Motorsports rear upper control arm bushings, Texas Speed long-tube headers with 2" primaries, modified fully 3" Magnaflow competition catback. CAI cold-air intake. DBA rotors, Hawk pads. Quote:
|
|
03-25-2015, 09:08 PM | #6561 |
General Motors Aficionado
Drives: 2023 GMC Canyon, 2020 Colorado Join Date: Aug 2008
Location: Florida
Posts: 37,371
|
I've heard good things about the XD-S as well. Figured I'd go to the range and try both of them out.
__________________
2023 GMC Canyon Elevation 2020 Chevrolet Colorado W/T Extended Cab (State-issued) |
03-25-2015, 09:13 PM | #6562 |
Drives: 2010 Camaro 2LT RS, 2009 GTR Join Date: May 2009
Location: Kansas
Posts: 2,559
|
Try the .45 version of the XD-S if you can too. Similar feel to the 9mm version and only real difference aside from recoil is that it drops off a little sooner than the 9mm version. I carry the .45 and my buddy carries the 9mm. Both love the XD-S, totally random that we bought the same style.
__________________
Build thread: http://www.camaro5.com/forums/showthread.php?t=152335
Photos: www.flickr.com/bradbeer GTR Instagram: @NoCrustGTR |
03-26-2015, 07:23 AM | #6563 |
|
a buddy of mine has an XD, and XD-M, and an XS-S. loves all of them.
|
03-27-2015, 05:16 PM | #6564 | |
Drives: 2015 Challenger SRT Join Date: May 2011
Location: Roy, UT
Posts: 1,002
|
Quote:
My biggest gripe about the M&P Shield is the retarded placement of the takedown lever below the barrel feed ramp in the mag well. Worst design ever! I can't get my fat ass finger down there; I have to use a tool to manipulate that lever. |
|
03-27-2015, 05:25 PM | #6565 |
Drives: 2010 Camaro 2LT RS, 2009 GTR Join Date: May 2009
Location: Kansas
Posts: 2,559
|
Denis you have the Saiga correct? Where did you pick yours up at? Anything to look for when hunting for one?
__________________
Build thread: http://www.camaro5.com/forums/showthread.php?t=152335
Photos: www.flickr.com/bradbeer GTR Instagram: @NoCrustGTR |
03-27-2015, 07:35 PM | #6566 |
just got a S&W M&P Shield 9mm ..........love it
|
|
Tags |
camaro gun |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Firearms section? | monstertodd | Site Related Announcements / Suggestions / Feedback / Questions | 23 | 06-10-2010 08:32 PM |
Removing Swirl Marks using a Flex and Meguiars M105/M205 | Angelo@Autopia | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 5 | 05-22-2010 10:36 PM |
The COPO of Today | The_Blur | 5th Gen Camaro SS LS LT General Discussions | 48 | 01-31-2010 07:00 PM |
Laws Protecting Consumers for Aftermarket Parts | strauchpete | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 9 | 01-17-2010 08:31 AM |
IMPORTANT Part 1 Warranty Disputes | Zeus | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 11 | 08-25-2009 11:37 AM |