Zex treatment. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ROD1 · 11-16-2010, 06:05 PM

A few of us got the 1/4" fuel T in our kits instead of the 3/8" so I finally decided to contact zex to get the right size in case it was screwin with my fuel pressure. Here is how the emails went after I contacted them.

Rod,
That kit should have included a 3/8 inline fuel tee fitting. That fitting is
not undersized and there should be no problem with the fuel pressure.
Thank you,
Austin Green

Its not a 3/8 it is smaller than that but thanks anyways. I will convey your answer on the forums though. Thank you, ROD1 Camaro5.com

Well, if you don’t believe it is the 3/8 fitting which should have come with that system, you’re more than welcome to send the fitting in for us to inspect.
Thank you,
Austin Green

Lol, I think i can measure but thanks just the same lol "Rod"

Alright. Just let us know if you need anything else.
Thank you and have a nice day,
Austin Green

Yeah you too. No wonder NX and the rest are kickin ur ass. "Rod"

_________________
"I have been dismissed" I will never buy a F&c*!n thing from comp cams or zex again.

GretchenGotGrowl · 11-16-2010, 06:23 PM

WOW! How much could the T cost? If would have been me I would have sent it to you and not even asked for a return of the old.

Can you post a photo of the one you got? I'll be down at Polk Performance on Thursday and maybe they have one laying round.

ROD1 · 11-16-2010, 07:19 PM

Quote:

Originally Posted by GretchenGotGrowl

WOW! How much could the T cost? If would have been me I would have sent it to you and not even asked for a return of the old.
Can you post a photo of the one you got? I'll be down at Polk Performance on Thursday and maybe they have one laying round.

Naw thats OK. They are dirt cheap, Ill pick on up but thanks.
I will post a pic when I remove it.

GretchenGotGrowl · 11-16-2010, 08:03 PM

Quote:

Originally Posted by ROD1

Naw thats OK. They are dirt cheap, Ill pick on up but thanks.
I will post a pic when I remove it.

Cool. Thought it might be something special.

SIXJAK · 11-17-2010, 01:38 AM

Quote:

Originally Posted by ROD1

A few of us got the 1/4" fuel T in our kits instead of the 3/8" so I finally decided to contact zex to get the right size in case it was screwin with my fuel pressure. Here is how the emails went after I contacted them.

Rod,
That kit should have included a 3/8 inline fuel tee fitting. That fitting is
not undersized and there should be no problem with the fuel pressure.
Thank you,
Austin Green

Its not a 3/8 it is smaller than that but thanks anyways. I will convey your answer on the forums though. Thank you, ROD1 Camaro5.com

Well, if you don’t believe it is the 3/8 fitting which should have come with that system, you’re more than welcome to send the fitting in for us to inspect.
Thank you,
Austin Green

Lol, I think i can measure but thanks just the same lol "Rod"

Alright. Just let us know if you need anything else.
Thank you and have a nice day,
Austin Green

Yeah you too. No wonder NX and the rest are kickin ur ass. "Rod"

_________________
"I have been dismissed" I will never buy a F&c*!n thing from comp cams or zex again.

It just never pays to be smug with a customer. DISH did the same kind of thing to me after they screwed me out of 400.00 so as I promised the supervisor 6 years ago, I go out of my way to tell everyone that they suck for the rest of my life. This after I told him to enjoy their 400.00.

Power to the PEEPS!!!!!

scrming · 11-17-2010, 07:20 AM

Like my Zex... but yes, their first level customer support sucks... Basically I ranted until they put the manager on the line... got his direct number and things were fine after that...

HDRS · 11-17-2010, 08:06 AM

Hey Rod that sucks but I have to say the two times I contacted Zex I received good customer service. However you are right the fitting is too small for the fuel line they provide that is one of the reasons I ran my line to the Schrader valve.
I would recommend that you send them a picture to prove your point.

DAL123 · 01-29-2011, 08:38 AM

testing

11-16-2010, 06:05 PM	#1
ROD1 Retired Drives: 2010 Camaro RS V6 #1301 DOB 3/23/09 Join Date: Aug 2009 Location: Ithaca NY Posts: 2,563	Zex treatment. A few of us got the 1/4" fuel T in our kits instead of the 3/8" so I finally decided to contact zex to get the right size in case it was screwin with my fuel pressure. Here is how the emails went after I contacted them. Rod, That kit should have included a 3/8 inline fuel tee fitting. That fitting is not undersized and there should be no problem with the fuel pressure. Thank you, Austin Green Its not a 3/8 it is smaller than that but thanks anyways. I will convey your answer on the forums though. Thank you, ROD1 Camaro5.com Well, if you don’t believe it is the 3/8 fitting which should have come with that system, you’re more than welcome to send the fitting in for us to inspect. Thank you, Austin Green Lol, I think i can measure but thanks just the same lol "Rod" Alright. Just let us know if you need anything else. Thank you and have a nice day, Austin Green Yeah you too. No wonder NX and the rest are kickin ur ass. "Rod" _________________ "I have been dismissed" I will never buy a F&c*!n thing from comp cams or zex again.

11-16-2010, 06:23 PM	#2
GretchenGotGrowl Drives: 11 F150 EB/13 Sonic RS/15 Z06 Join Date: Sep 2010 Location: Little Rock, AR Posts: 7,129 View My Garage	WOW! How much could the T cost? If would have been me I would have sent it to you and not even asked for a return of the old. Can you post a photo of the one you got? I'll be down at Polk Performance on Thursday and maybe they have one laying round. __________________ New Ride -- 2015 Z06 2LZ (stock) -- Journal Old Ride -- 2012 Camaro 2LT/RS (647 RWHP & 726 RWTQ) -- Build Thread

11-17-2010, 07:20 AM	#6
scrming Red Brick of Vengeance! Drives: 12 Second Brick Join Date: Jun 2009 Location: at my pulpit Posts: 7,745	Like my Zex... but yes, their first level customer support sucks... Basically I ranted until they put the manager on the line... got his direct number and things were fine after that... __________________ 2011 Ford Flex EcoBoost Limited - 12.727 @ 109.790 MPH

11-17-2010, 08:06 AM	#7
HDRS Fastest V6 Drives: 2010 CGM 2LT/RS 06 G6 GTP conv. Join Date: Mar 2010 Location: Bensalem PA Posts: 314	Hey Rod that sucks but I have to say the two times I contacted Zex I received good customer service. However you are right the fitting is too small for the fuel line they provide that is one of the reasons I ran my line to the Schrader valve. I would recommend that you send them a picture to prove your point. __________________ 1/4 Mile 11.841 at 113.98mph SEPA5 /TEAM LLT

01-29-2011, 08:38 AM	#8
DAL123 Drives: 2010 Camaro 2LT/RS/A6 Join Date: Aug 2009 Location: New Bedford, Mass. Posts: 106 View My Garage	testing __________________ Trifecta Tune, Vararam CAI,Self ported Intake Manifold,3/8 Black Iceolator,Rx Catch Can, W/Breather, V8 Rear Diff. 3:45s W/Posi Mod, Mrt V2.0 Axel Back, Magnaflow Resonated X-pipe, Street Scene Front Splitter.,V-Max Trottle Body., Eiback Sway Bars., Phadt End Links.,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zex bought out by Competition cams?	ROD1	Forced Induction - V6	11	07-14-2010 11:00 AM
Anyone installed the ZEX Kit?	Germann	Forced Induction - V6	10	02-21-2010 12:16 PM
V6 Camaro Owners! 2010 V6 Zex Nitrous System now available!	Kris@BMCPerformance	Forced Induction	3	01-23-2010 02:41 PM
ZEX Installation Instructions	tbyrne	Forced Induction - V8	0	09-26-2009 02:03 PM
New Zex 2010 Camaro V6 Nitrous Kit - intro and free shipping @ PFYC.com	Redshift	Forced Induction	0	07-16-2009 08:31 AM