10-31-2013, 06:30 PM | #1 |
Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009
Location: HOMELESS
Posts: 10,010
|
Need help removing the window shield crowl
Hello need to remove the window shild Crowl and heard its hard to do and I'm not sure how to do it. I looked in the DIY section and don't see it. Anyone know...
|
10-31-2013, 06:36 PM | #2 |
Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009
Location: Palmyra, PA
Posts: 5,675
|
There are a # of clips...take them out and the cowl will pull out...I think there are 3 to take out to get to the air filter
|
10-31-2013, 06:58 PM | #3 |
Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009
Location: HOMELESS
Posts: 10,010
|
Yea I know the air filter one is no issue.. The one that has the wipers is the issue. Think the wipers have to come off not sure about it
|
10-31-2013, 09:52 PM | #4 |
Account Suspended
Drives: SS Join Date: Aug 2013
Location: jawja
Posts: 128
|
It doesn't unbolt. You have to cut it off...
|
10-31-2013, 10:08 PM | #5 |
|
^
Unbolt the wiper arms and look around for the push pins. Once the push pins are out, you can wiggle the cowl out. If it's being stubborn and not loose, you missed a pin or two.
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
|
10-31-2013, 10:27 PM | #6 |
Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009
Location: HOMELESS
Posts: 10,010
|
|
10-31-2013, 10:41 PM | #7 |
Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009
Location: HOMELESS
Posts: 10,010
|
Going to try sat to take it out
|
11-03-2013, 05:07 PM | #8 |
Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009
Location: HOMELESS
Posts: 10,010
|
Just got done taking off the wipers and plastic Crowl what a pain should have made a DIY there is a trick to it the blades have to be vertical with the window. once I did that they came right off
|
11-03-2013, 05:32 PM | #9 |
Drives: 2010 2SS/RS , 2011 C6 Base Corvette Join Date: Feb 2010
Location: Naples Florida
Posts: 774
|
Where were the push pins and why are you removing the cowl?
__________________
SUICIDE BY RACECAR |
11-03-2013, 05:38 PM | #10 |
Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009
Location: HOMELESS
Posts: 10,010
|
|
11-07-2013, 08:12 AM | #11 |
Account Suspended
Drives: SS Join Date: Aug 2013
Location: jawja
Posts: 128
|
Oh, you mean the cowl cover. The cowl is the actual metal sheetmetal that frames where the wipers go. Makes more sense now.
|
|
|
|
|