How much hp by adding air scoop - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Apex Motorsports · 08-29-2015, 10:01 AM

Quote:

Originally Posted by Tenring

Thanks but not the case, I have a strong MAF and have cleaned it a couple times thinking that was the issue.

I have read post from a few others that have had the same issue.......I will look for the code I pulled awhile ago and post it up.

Codes I pulled previously were P015B and P015D......delayed response to front O2 sensors.

JC - I am never on the gas ha ha........agree probably time for headers and a tune though!

Those codes wouldn't be due to the CAI/scoop. Sorting that our would be the perfect time for headers and tuning.

Irace16 · 08-29-2015, 10:11 PM

I'd like a price on the scoop and washer relocate as well , thanks. I never read about this before , shouldn't have waited

Shawno72 · 08-29-2015, 11:12 PM

Great info

rdblan2 · 08-29-2015, 11:42 PM

I bought one of these years ago and finally put it on. I was worried about the "cut" until I saw what I was cutting. It really doesn't matter if you screw it up. You're not gonna see it unless you pull the fender liner and tire, then crawl under the car to see it. Not a big deal, easy install.

I've only driven the car once since I put it on so haven't really noticed anything yet.

Smokin19 · 08-30-2015, 07:59 AM

My experience with a CAI intake and Apex scoop is, it is well worth it. Like someone said, it makes a difference when you punch it anytime after 30mph and if it's a little cool out, you better have traction control on.

Apex Motorsports · 08-30-2015, 10:00 AM

Quote:

Originally Posted by Irace16

I'd like a price on the scoop and washer relocate as well , thanks. I never read about this before , shouldn't have waited

PM on the way.

Quote:

Originally Posted by Smokin14

My experience with a CAI intake and Apex scoop is, it is well worth it. Like someone said, it makes a difference when you punch it anytime after 30mph and if it's a little cool out, you better have traction control on.

SSeniorMoment · 08-30-2015, 07:29 PM

Please add me to your PM list when you get the the time. Hopefully I'll be able to post some before/after comparative times with my mods.

JCunningham · 08-30-2015, 11:20 PM

lol Apex how many Scoop orders have you gotten because of my thread. (wasnt my intentions mods)
I put my scoop on. Nice unit.

Apex Motorsports · 09-10-2015, 05:28 PM

Quote:

Originally Posted by JCunningham

lol Apex how many Scoop orders have you gotten because of my thread. (wasnt my intentions mods)
I put my scoop on. Nice unit.

Hard to say. It is a pretty popular item. Glad you are happy with it.

dstrong34 · 09-11-2015, 03:57 PM

Quote:

Originally Posted by Apex Motorsports

Hard to say. It is a pretty popular item. Glad you are happy with it.

Please PM me prices

ELIC1 · 09-11-2015, 04:07 PM

here what i have the ADM scoop and CAI INTAKE washer/bottle KIT ported throtle body and the vtc controller with a tune... had this all before my kook headers and exguest. i can tell you this set up is really nice and you will feel it big time. then add headers and you are good to go....

Apex Motorsports · 09-11-2015, 07:30 PM

Quote:

Originally Posted by dstrong34

Please PM me prices

PM sent.

Quote:

Originally Posted by ELIC1

here what i have the ADM scoop and CAI INTAKE washer/bottle KIT ported throtle body and the vtc controller with a tune... had this all before my kook headers and exguest. i can tell you this set up is really nice and you will feel it big time. then add headers and you are good to go....

Glad to hear that you are happy with it. Thanks for posting your feedback.

Iroc Drew · 09-11-2015, 07:44 PM

Please PM me the price of the scoop only as I have the Roto-Fab washer relocation II kit that I will be using in conjunction with the scoop.

Apex Motorsports · 09-12-2015, 09:22 AM

Quote:

Originally Posted by Iroc Drew

Please PM me the price of the scoop only as I have the Roto-Fab washer relocation II kit that I will be using in conjunction with the scoop.

PM sent.

08-29-2015, 10:11 PM	#30
Irace16 Drives: 2010 1SS RS M6 Join Date: Jan 2015 Location: Appleton, Wisconsin Posts: 521	I'd like a price on the scoop and washer relocate as well , thanks. I never read about this before , shouldn't have waited __________________ Vararam intake, gmpp exhaust, borla stainless long tubes, cat less, jannetty tune, bmr lowering springs, heritage grill , smoked lenses

08-29-2015, 11:42 PM	#32
rdblan2 Drives: 2SS RS Join Date: Mar 2010 Location: MD Posts: 1,272	I bought one of these years ago and finally put it on. I was worried about the "cut" until I saw what I was cutting. It really doesn't matter if you screw it up. You're not gonna see it unless you pull the fender liner and tire, then crawl under the car to see it. Not a big deal, easy install. I've only driven the car once since I put it on so haven't really noticed anything yet. __________________ Livernois 2C cam and tune, LS3 conversion, Roto-Fab intake, Kooks headers, DSS driveshaft and axles, BMR suspension parts, VMax ported throttle body, Whipple blower. (623hp).

08-30-2015, 07:59 AM	#33
Smokin19 Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014 Location: S.W. ohio Posts: 1,557	My experience with a CAI intake and Apex scoop is, it is well worth it. Like someone said, it makes a difference when you punch it anytime after 30mph and if it's a little cool out, you better have traction control on. __________________ BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/cats, AWE Touring, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.

08-30-2015, 11:20 PM	#36
JCunningham Drives: 2017 2SS M6 Join Date: Jun 2013 Location: WNY Posts: 7,070	lol Apex how many Scoop orders have you gotten because of my thread. (wasnt my intentions mods) I put my scoop on. Nice unit. __________________ real ZL1 wheels and brakes, 285/305 Michelin Pilot Super Sports, Pray ported Intake manifold, Soler Throttle Body, Rotofab intake, EFI Tuning Flex fuel kit, full American Racing Headers Exhaust, 1 7/8" w/ cats H pipe and mufflers. Full 1LE suspension, with BMR adjustable sway bars and links, GM aluminum cradle bushings, Hurst shifter with lighter reverse spring, TWM shifter knob, Tick level 1 transmission. I should have bought a ZL1

09-11-2015, 07:44 PM	#41
Iroc Drew Drives: 2015 1LE 2SS/RS CRT NPP AYZ NAV SUN Join Date: Aug 2014 Location: North Aurora IL. Posts: 258 View My Garage	Please PM me the price of the scoop only as I have the Roto-Fab washer relocation II kit that I will be using in conjunction with the scoop. __________________ 1989 IROC Z L98. 2015 Silverado LT. 2015 2SS 1LE.

08-29-2015, 11:12 PM	#31
Shawno72 Drives: 2015 Black 2LT RS M6 Join Date: Aug 2015 Location: Cali Posts: 2,033	Great info

08-30-2015, 07:29 PM	#35
SSeniorMoment Drives: 2010 2SS/RS LS3 A6 IOM Join Date: May 2013 Location: Arizona Posts: 1,190	Please add me to your PM list when you get the the time. Hopefully I'll be able to post some before/after comparative times with my mods.

09-11-2015, 04:07 PM	#39
ELIC1 Account Suspended Drives: black and silver Join Date: Apr 2014 Location: new york Posts: 1,728	here what i have the ADM scoop and CAI INTAKE washer/bottle KIT ported throtle body and the vtc controller with a tune... had this all before my kook headers and exguest. i can tell you this set up is really nice and you will feel it big time. then add headers and you are good to go....