02-05-2011, 11:21 PM | #351 |
Booooosted.
|
Piece of cake. If I can do it you can too.
|
02-06-2011, 01:14 AM | #352 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Considering re-moving the door panel inserts, dash inserts and the counsole guages for painting IOM. After all the mods I have done so far, it scares the hell out of me to muck with plastic trim stuff.
Any thoughts or advice on this project. To be honest I really wanted the IOM interior package, but I could not live with all that orange leather. Just too much for my liking.
__________________
|
02-07-2011, 01:15 AM | #353 |
www.Camaro5store.com
|
Easy as cake to do. If you can find a friend in the area to help, it's really some easy stuff. You just need 5 lights, a light tube for the dash and light tubes for the doors, the connectors, the door and dash inserts....aaaand that's it. I'm still waiting on Lupe to get his lights in. Once he gets them, we are going to toss his stuff together in record time.
|
02-07-2011, 01:45 AM | #354 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Oh. You must have mis-understood. I want to remove the door panel inserts, dash inserts and center counsol guages to have them painted IOM. Not doing the light thing right now.
__________________
|
02-07-2011, 02:38 PM | #355 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Driveshaft Shop steps up to the plate again. Now that I have there driveshaft, they feel I need a set of there axels to go with it is in order. Made me an offer I can't refuse. Thanks to Frank and the Driveshaft Shop crew.
__________________
Last edited by Merc; 02-07-2011 at 09:00 PM. |
02-08-2011, 01:07 AM | #356 | |
www.Camaro5store.com
|
Quote:
Yes, you'll need to paint the center gauge console, but the other stuff you can simply buy new if you wanted. And, it'll only take an hour to install the inserts (all of them) yourself. It'll take a few hours if you've never done it before, but I could have your dash inserts done in 5 min....doors....mmmm 40 min tops. It's rather easy. It's the painting that is going to be the pain if that is the route you decide to go. |
|
02-08-2011, 07:06 AM | #357 | |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Quote:
__________________
|
|
02-08-2011, 10:57 AM | #358 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Will I be able to easily see what has to be masked in order for the ambient light to work?
__________________
|
02-08-2011, 10:04 PM | #359 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
The weather will finally cooperate with my schedule. My insurance guy has already faxed the permit to me. I'm good to go for a blast in Pumpkin tomorrow.Cool, clear and sunny for a few days. Pumpkin will slide around a bit due to cold roads, but I deal with it.
__________________
|
02-08-2011, 11:13 PM | #360 |
Drives: 2010 Black 1SS Join Date: Aug 2009
Location: Langley BC
Posts: 666
|
Tires are fine. I've had TC off for the past week
__________________
2010 Black 1SS LS3 M6
Power: Kook's 1 7/8" Long Tubes and 3" Exhaust, Injen Full Length CAI, Jannetty Tune Drivetrain: MGW Short Shifter, Street Slayer Twin Clutch, DSS 1 Piece Aluminum Driveshaft, DSS 1000HP Axles, BMR Pro and Delrin Diff Bushings Suspension: BMR Trailing Arms and Bushings, FE6 Swaybar Conversion With Pedders 27mm Front and 32mm Rear ZL1 Swaybars and Links Chassis: Hotchkis Chassis Max Brace, BMR Pro Cradle Bushings Exterior:: Shine by Adam's. ...and plenty more |
02-09-2011, 01:18 AM | #361 |
www.Camaro5store.com
|
|
02-09-2011, 08:08 AM | #362 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
From your post regarding painting the door panel inserts, I am lead to believe that I have to mask a thin strip for the door panel to let the ambient light strip shine through?
__________________
|
02-10-2011, 01:13 AM | #363 |
www.Camaro5store.com
|
If you are going to paint the door inserts on the outside, yes...you'd need to tape off the very top part and not paint it...or the light won't shine through.
|
02-10-2011, 09:55 AM | #364 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Well there was frost on the Pumpkin this morning when I got up. Yesterday's test drive went well. Everthing seems good. Later today Pumpkin needs a good bath and then back into hibernation for detailing and some paint mods. Hope to get to the Heritage grill installation done this weekend.
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Can ring and pinion be installed w/ pumpkin in car? | GMRULZ | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 2 | 01-19-2011 07:33 PM |
Pumpkin Fixed | Merc | Canada | 12 | 10-24-2010 08:38 PM |
Nekoosa Pumpkin Fest | blackgoldhtr | USA - Great Lakes | 1 | 10-14-2010 08:18 PM |
Pumpkin Gets Signed | Merc | Canada | 9 | 09-03-2010 11:12 PM |
Pumpkin is moving to the city | Noah | 5th Gen Camaro SS LS LT General Discussions | 0 | 11-27-2009 01:12 PM |