camaro stabilitrak - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Soren_camaro · 10-19-2021, 09:56 AM

usually I'm driving and when i want to speed here and there ill half throttle and when i come to a stop after that stabilitrack goes on and the thang starts jumping like a Malibu with cut springs (not actually but it jumps) and ive taken it to dealer and tried reading codes all that nothing..

Rmkuper · 10-19-2021, 10:58 AM

This is a common issue with gen5. Moats common issue is a bad battery have it checked/replaced. If that's not it below is a link that covers just about every scenario. It helped me with my issue which ended up being a wiring issue.

https://www.camaro5.com/forums/showthread.php?t=527875

Sent from my SM-F916U using Tapatalk

xstuntman · 10-19-2021, 11:37 AM

To my knowledge the V6s don't get the heat soak issues the 8s do. It seems like the majority of the time the stabilitrack is the first code thrown out there when its really an electrical slash battery related issue. Not always but usually.

wasthatacop? · 10-20-2021, 10:47 PM

My experience has been that Stabilitrak warning comes up for a number of reasons. I grenaded an engine and got Stabilitrak warning. I've heard it come up for various mechanical problems.

lewylew · 10-20-2021, 11:05 PM

I had Stabilitrak light keep coming on. I found out that I was missing a body ground. Added a ground from bell housing to the body and all my problems went away. This actually fixed my transmission issues as well.

MIKZ28 · 10-21-2021, 10:27 AM

I had this problem once. Loose spark plug wire caused it.

Greenhornet2 · 10-21-2021, 10:49 AM

can be a million things. First step pull dtc codes. Very common is throttle body issues. Will throw stabiltrac on, limp mode, bucking.

JStampf · 10-25-2021, 05:38 AM

Check spark in plug and wires. the rough ride and stabilitrack are indicators of misfire. I had a plug wire come off just so slightly it was intermittent but had very similar issue.

AlanRubin · 10-26-2021, 07:00 AM

Quote:

Originally Posted by Greenhornet2

can be a million things. First step pull dtc codes. Very common is throttle body issues. Will throw stabiltrac on, limp mode, bucking.

I Am on my 3rd one, flagged the stabilitrack, and displayed REDUCED
POWER MODE !

Never got a stablilitrack error for misfires, and I had them for a while, till I
fixed the problem.

SS97N1 · 10-29-2021, 08:02 AM

I had this same problem after ring and pinion install and it was the wheel speed sensor.

FasNuf · 10-29-2021, 08:54 AM

Do you have magnetic ride?

10-19-2021, 09:56 AM	#1
Soren_camaro sorenvamps Drives: 2013 Camaro LS muffler delete CAI Join Date: Oct 2020 Location: Arizona, Chandler Posts: 1	camaro stabilitrak usually I'm driving and when i want to speed here and there ill half throttle and when i come to a stop after that stabilitrack goes on and the thang starts jumping like a Malibu with cut springs (not actually but it jumps) and ive taken it to dealer and tried reading codes all that nothing..

10-19-2021, 11:37 AM	#3
xstuntman Drives: 2012 Victory Red LFX Join Date: Dec 2012 Location: west central Texas Posts: 1,310	To my knowledge the V6s don't get the heat soak issues the 8s do. It seems like the majority of the time the stabilitrack is the first code thrown out there when its really an electrical slash battery related issue. Not always but usually. __________________ 2018 SS wheels, red Heritage grille, actual driving lights, ZL1 strut tower brace, GM Performance billet aluminum fuel door, front grille Bowtie delete, painted red rotors and calipers, 1/4 window American Flags, splash guards, AEM dry panel air filter.

10-20-2021, 10:47 PM	#4
wasthatacop? Drives: 2010 2SS Join Date: Apr 2017 Location: Los Angeles Posts: 360 View My Garage	My experience has been that Stabilitrak warning comes up for a number of reasons. I grenaded an engine and got Stabilitrak warning. I've heard it come up for various mechanical problems. __________________ 2010 2SS living in Los Angeles replaced engine @ 93,000 miles w/ crate engine, camshaft by Comp Cams installed by me, replaced valve train parts, 1.4" BMR lowering springs ZL1 factory rims misc: drilled and slotted rotors, fresh air brake cooling system, new speakers, installed reverse camera, muffler delete

10-20-2021, 11:05 PM	#5
lewylew Drives: 2010 ZL550& 2021 C8 Z51 Join Date: Feb 2010 Location: Near Philadelphia Posts: 1,577 View My Garage	I had Stabilitrak light keep coming on. I found out that I was missing a body ground. Added a ground from bell housing to the body and all my problems went away. This actually fixed my transmission issues as well. __________________

10-21-2021, 10:49 AM	#7
Greenhornet2 Drives: 2011 Camaro 2SS LS3 Whipple Join Date: May 2019 Location: Connecticut Posts: 1,925	can be a million things. First step pull dtc codes. Very common is throttle body issues. Will throw stabiltrac on, limp mode, bucking. __________________ Whipple 2.9 CAI ID1050x injectors ZL1 Pump JRE FPCM JMS Voltage booster JRE Rough Idle blower cam BTR .660 springs CHE trunnion kit 1 7/8 Speed Engineering Borla Atak JRE scoop 1.5" lowering springs BMR trailing arms and toe links Cradle inserts 704WHP 603WTQ 93 octane

10-19-2021, 10:58 AM	#2
Rmkuper Drives: 2010 Camaro SS Join Date: Oct 2020 Location: Newburgh Posts: 164	This is a common issue with gen5. Moats common issue is a bad battery have it checked/replaced. If that's not it below is a link that covers just about every scenario. It helped me with my issue which ended up being a wiring issue. https://www.camaro5.com/forums/showthread.php?t=527875 Sent from my SM-F916U using Tapatalk

10-21-2021, 10:27 AM	#6
MIKZ28 Drives: 2015 Camaro Z/28 #311 Join Date: Feb 2018 Location: Roscoe, IL Posts: 133	I had this problem once. Loose spark plug wire caused it.

10-25-2021, 05:38 AM	#8
JStampf Drives: 2012 Camaro 2SS 2003 Silverado SS Join Date: Jun 2021 Location: New York Posts: 6 View My Garage	Check spark in plug and wires. the rough ride and stabilitrack are indicators of misfire. I had a plug wire come off just so slightly it was intermittent but had very similar issue.

10-29-2021, 08:02 AM	#10
SS97N1 Drives: 2011 Camaro SS 2SS Join Date: Aug 2021 Location: Palm Beach Posts: 4	I had this same problem after ring and pinion install and it was the wheel speed sensor.

10-29-2021, 08:54 AM	#11
FasNuf Drives: 2014 Camaro ZL1 Join Date: Jul 2019 Location: Oregon Posts: 1,615 View My Garage	Do you have magnetic ride? __________________ . . . . https://www.youtube.com/channel/UCgN...etl17hA/videos