05-22-2018, 01:10 PM | #1 |
Drives: 2014 camaro 2SS 1LE Join Date: Apr 2018
Location: Ontario
Posts: 14
|
Brake dust.
I spent hours washing my car. I stepped back and thought I did an amazing job. so I decided to go for a little cruise I wasn't gone more than 10 minutes. when I got back my brother asked me why I didn't wash my rims, when I ran my finger over the rim it was covered in brake dust. I was shocked, what can I do to prevent this from happening do I have to go to a different brake pad?
Any help would be greatly appreciated. |
05-22-2018, 05:55 PM | #2 |
Drives: 2014 Camaro LS / 13 zl1 Join Date: May 2016
Location: Hayes , Va.
Posts: 367
|
Get ceramic pads
|
05-22-2018, 09:58 PM | #3 |
Drives: early 2011 Camaro convertible Join Date: Jul 2014
Location: House Springs, Mo
Posts: 2,002
|
don't press on the brake pedal
__________________
Early 2011 LT Convertible, ZL1 bumper, hood, side skirts, belly pan and wheels, Truecarbon ECF hood extractor, K&N CAI, Elite catch can, Big Worm Bow Tie emblems, Jacfab bracket, Vitesse TC, BMR strut brace, BMR tunnel brace, NPP exhaust |
05-22-2018, 11:11 PM | #4 |
Drives: 2014 Camaro LS / 13 zl1 Join Date: May 2016
Location: Hayes , Va.
Posts: 367
|
|
05-24-2018, 12:28 PM | #5 |
Drives: 2018 Charger SRT 392 F8 Green Join Date: Aug 2010
Location: Oakville Ontario, Canada
Posts: 1,910
|
Hawk blue pads. No dust.
|
05-24-2018, 12:59 PM | #6 |
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
Ceramic pads...
__________________
2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle.
603 h.p. 495 ft lbs tq. |
Thread Tools | |
|
|