01-07-2013, 10:57 AM | #1 |
Hide! My wife's coming!
Drives: 2013 Chevrolet Camaro ZL1 Join Date: Jun 2011
Location: Las Colinas, TX
Posts: 1,442
|
315 on rear question
Guys/Gals,
I am thinking of getting some new Wheels for the 2SS and I am thinking 20x8.5 fronts and 20x10 on rears. Anyone have or see any issues with 275/40/20 on the fronts and 315/35/20 on the rears? Thanks all or the help. |
01-07-2013, 11:48 AM | #2 |
Drives: 2017 SS Join Date: Sep 2011
Location: Oklahoma
Posts: 417
|
No problems with right wheel offsets. I have them with 20x 10's all the way around on my car with coil overs lowered. No rubbing of any type.
Sent from my iPhone
__________________
2017 SW SS
|
01-07-2013, 12:21 PM | #3 |
|
Typically, a 10" wheel is about 1/2" too narrow for a 315 tire....(per the manufacturer's recommendations). Yes, it will most likely fit on the wheels without any serious problems, but just sayin'......
I've seen people put 315's on a 9" wheel (bad idea), so at least the 10" wheel is a bit more realistic. |
01-07-2013, 12:25 PM | #4 |
Drives: . Join Date: Nov 2012
Location: .
Posts: 1,085
|
|
01-07-2013, 01:18 PM | #5 |
Drives: 2012 2LT 45th convertible Join Date: Jul 2010
Location: Albuquerque
Posts: 949
|
Nittos wheel specs for a 315 is
315/35ZR20 106W203-60010.028.6212.4010.5-(11.0)-12.52094 @ 51 10 inch rims are a slight bit small for what they truly recomend Here is the sizing chart if you want to take a look http://www.nittotire.com/Tire/invo#size
__________________
Top Ten Reasons I Procrastinate
1. |
01-07-2013, 06:31 PM | #6 |
Drives: 2011 Cyber Grey 1SS/RS A6 Join Date: Aug 2011
Location: Needville TX
Posts: 228
|
No problems here either
__________________
Whipple, GT9 cam, LS3 conversion, ZL1 pistons, ZL1 rods, Circle D converter, Stage 3 trans, Tuned by Pat G, CAI inc, TPS headers, posi mod, Dynomax bullet cat back, VMAX TB, ADM Scoop, RX catch can, Eibach prokit plus, Eurotek Mesh 33 wheels, P13w DRLs, Pioneer/Massive Audio/Vibe/JL interior goodies.
613 RWHP/596 TQ |
01-07-2013, 06:42 PM | #7 |
Drives: 2SS RS Join Date: Mar 2010
Location: MD
Posts: 1,272
|
Assuming with the right offset, you would have no issues with the tire sticking out past the fender and spraying the sides of the car with debris either?
__________________
Livernois 2C cam and tune, LS3 conversion, Roto-Fab intake, Kooks headers, DSS driveshaft and axles, BMR suspension parts, VMax ported throttle body, Whipple blower. (623hp).
|
01-07-2013, 08:03 PM | #8 | |
Drives: 2017 SS Join Date: Sep 2011
Location: Oklahoma
Posts: 417
|
Quote:
Sent from my iPhone
__________________
2017 SW SS
Last edited by mikey1107; 03-06-2013 at 04:50 AM. |
|
01-07-2013, 08:11 PM | #9 |
So Cal Race Team
Drives: 2013 Camaro Join Date: Mar 2010
Location: Sunny So Cal
Posts: 3,584
|
If you are going to run Nitto's, no issue with a 315, if you run Pirelli's need to drop down to a 305, the 315 will rub on occasion on rough roads....
__________________
|
01-07-2013, 08:11 PM | #10 |
Drives: 2012 Camaro SS / Summit White Join Date: Aug 2012
Location: Santa Clarita, CA
Posts: 51
|
20x10 & 20x11 on 275/40 & 315/35
Here is my set up, Fits like a glove.
|
01-07-2013, 08:21 PM | #11 | |
Drives: 2017 SS Join Date: Sep 2011
Location: Oklahoma
Posts: 417
|
Quote:
although mine do not rub even on the the terrible Oklahoma roads, could be the stiffer springs on the coilovers
__________________
2017 SW SS
|
|
01-08-2013, 01:11 AM | #12 |
Hide! My wife's coming!
Drives: 2013 Chevrolet Camaro ZL1 Join Date: Jun 2011
Location: Las Colinas, TX
Posts: 1,442
|
Thanks all for the input... and beautiful cars to everyone who posted pictures.
|
01-08-2013, 10:01 AM | #13 | |
Drives: 2SS RS Join Date: Mar 2010
Location: MD
Posts: 1,272
|
Quote:
Perfect, thank you!
__________________
Livernois 2C cam and tune, LS3 conversion, Roto-Fab intake, Kooks headers, DSS driveshaft and axles, BMR suspension parts, VMax ported throttle body, Whipple blower. (623hp).
|
|
01-08-2013, 11:16 AM | #14 |
Drives: 2010 camaro 1ss/rs and 2010 2ss/rs Join Date: Sep 2010
Location: Burgaw, NC
Posts: 84
|
If you are not lowered a 315 will fit on stock wheel with someone that knows how to mount and balance! If will only rub at around 100mph taking turns
__________________
With love
DirtySilver (2010 camaro 1ss/rs LS3 twin turbo 556whp @6psi, 800+whp @ 18psi) BlackBetty (2010 camaro 2ss/rs L99 boltons 400whp) 2003 Silverado 1500 4x4 quadrasteer 5.3L 2018 Escalade 6.2L CustomDip&Paint LLC. Discount for all Camaro5.com users. |
|
|
|
|