10-05-2020, 08:59 PM | #1 |
Drives: chev camamro Join Date: Oct 2020
Location: mn
Posts: 3
|
2014 ZL1 Convertible exhaust recommendations?
I am new to this forum and the ZL!- I just bought a stock 2014 ZL1 convertible. I am adding the Jannetty Racing 75rwp kit and would like to get a little more sound out of this car. Any recommendations for exhaust? Would a cat back or axle back be more appropriate? Would I see any gains from the Cat back with no mods besides the JR 75kit? It seems most cat back kits are for coupes...
Last edited by scipio; 10-06-2020 at 09:29 PM. |
10-05-2020, 09:04 PM | #2 |
Drives: 2013 zl1 vert Join Date: Dec 2018
Location: Rochester, New york
Posts: 955
|
Don’t waste your money on a cat back. The factory NNP sounds great with headers no cats and a x pipe. Plus you will have a hard time fitting any 3” exhaust with the x bracing.
__________________
22% lower/ 2.5 upper/ 2” headers/ cat delete/ x-pipe/ 2 gallon x tank/ 100-3 pump/ fic 850/ dsx aux kit/ 103mm throttle body/ RPM 5” intake/ meth kit/ prometh lid injection/FI interchiller/ 160* stat/ ngk-7/ msd wires/ elite catch can/ tsp cam/ Che trunnions/ ported supercharger/ 1/2” lid spacer/ brick mod/BMR toe and trailing arms/ 751hp 757 tq SAE @17.3lb on a loaded dyno.
|
10-06-2020, 06:02 PM | #3 |
Drives: chev camamro Join Date: Oct 2020
Location: mn
Posts: 3
|
|
10-06-2020, 06:47 PM | #4 |
Drives: 2013 zl1 vert Join Date: Dec 2018
Location: Rochester, New york
Posts: 955
|
All zl1’s have them. Just look at you mufflers, you should see the actuator.
__________________
22% lower/ 2.5 upper/ 2” headers/ cat delete/ x-pipe/ 2 gallon x tank/ 100-3 pump/ fic 850/ dsx aux kit/ 103mm throttle body/ RPM 5” intake/ meth kit/ prometh lid injection/FI interchiller/ 160* stat/ ngk-7/ msd wires/ elite catch can/ tsp cam/ Che trunnions/ ported supercharger/ 1/2” lid spacer/ brick mod/BMR toe and trailing arms/ 751hp 757 tq SAE @17.3lb on a loaded dyno.
|
10-10-2020, 09:33 AM | #5 |
Drives: chev camamro Join Date: Oct 2020
Location: mn
Posts: 3
|
Thanks for the advice fellas, I ordered up headers, off road connectors and x pipe.
|
12-01-2020, 03:16 PM | #6 |
Drives: 2013 ZL1 V3RT Join Date: Feb 2012
Location: Tampa FL
Posts: 804
|
I feel like a Corsa setup would fit as an axle back... or a Bullet Performance.. I'm in the same boat.. I have a catback but it's got too much drone at highway speeds it drives me crazy right now...
__________________
2010 2SS- White M6 FBO,ZL1 10 spokes powdercoated silver, 3.91 gears- SOLD 2019
2017 Ocean Blue Silverado- 3.5 lift and 33x12.50s 2011 2SS Black M6- Cammed, Blown (MNSSTR) - Sold 2014 |
|
|
|
|