09-13-2009, 06:31 PM | #1 |
MOD SQUAD
|
Prototype SLP Wheels, Hoods, RS Emblem, and Rear Spoiler.
As featured on Homepage.
Okay, here are pictures of the ABM RS with SLP’s wheels, hoods, RS emblem, and rear spoiler (in prototype stage) at the Camaro Fall Classic and F-Body Summit 09. The wheels are the finished product and will have all safety ratings like factory wheels have; should be under $1300. They are direct replacement for the Camaro’s stock wheels. The hoods you see in the pictures are two possible products. The blue hood is a clay mold and unfinished so give SLP some slack on the finished look. If the blue hood is built, the front vent will be functional as well as a heat extractor. SLP unveiled the hoods then let everyone vote to see witch one will be built. I voted for the IOM hood. The winner will be announced in the near future. A lucky voter is going to win a copy of whichever hood is built. The RS emblem speaks for itself. Very cool touch for those who want to replace the “Gold Bow Tie” The Spoiler is also a prototype and unfinished. It is mounted with tape just for the show so the fit is rough. Once again cut SLP some slack. The production version will mount in the same location as the stock SS and RS spoiler. For those who have no spoiler the spoiler can be mounted with tape as well so no drilling for you V6 lovers… Also, the spoiler is made of light weight plastic so no added weight. Enjoy…
__________________
Who cares about the Blue Oval crowd and their little Ponys? We're getting our Camaro back-and it'll be Supercharged!-MDAII Team LS3 |
09-13-2009, 06:33 PM | #2 |
|
|
09-13-2009, 06:35 PM | #3 |
COTW: 12/13/10
Drives: 1969 Camaro Join Date: Feb 2008
Location: Orange County, CA
Posts: 7,880
|
not feeling it at all... the rims look cheap, the hood looks funny compared to the one revolution is doing, and the grill looks so tacky. the spoiler looks good though
__________________
"Are you one of those boys who prefer cars to women? - I'm one of those boys that appreciates a fine body, regardless of the make." 1969 CAMARO JOURNAL: http://www.camaro5.com/forums/showthread.php?t=341239 | FACEBOOK: http://www.facebook.com/taylor.ryan.apt | GRAPHIC DESIGN: www.aptdesigns.net |
09-13-2009, 06:37 PM | #4 |
Drives: 2SS w/ ZZ427 Package!! Join Date: Oct 2008
Location: Pittsburgh, PA
Posts: 2,700
|
Don't get me wrong, I am a huge fan of SLP. I sell tons of their products and they are of the highest quality out there.
That being said... I am disappointed in the new spoiler, I feel the one of the ZL575 car is much better and will appeal to many more people. It will only be available on the purchase of the entire ZL package, which is kind of a let down to me. Same thing goes for the hood on the ZL car. As for the new hood, I voted for the image of the red car, as opposed to the blue car. That is just my opinon, and not meant to take anything away from those whom may like them. |
09-13-2009, 06:46 PM | #5 |
NCM-WINR
Drives: 2010 SS/RS IOM 2014 2LT Stingray Join Date: Mar 2009
Location: Pittsburgh
Posts: 2,324
|
Voted red
__________________
also drives a heavily modified Jeep Wrangler. It has LED headlights and wheel weights blacked out with Plasti Dip. It's Baller.
|
09-13-2009, 06:47 PM | #6 |
Drives: '13 Roush S3 '16 Ram Sport 4X4 Join Date: Apr 2009
Location: Massachusetts
Posts: 3,100
|
I'm not really feeling those items for some reason. I think the spoiler is a let down. (I like the REVOLUTION SUPER SPORT hood and front chin spoiler.)
The wheels, I'm no feeling at all. No offense to anyone that may like them. |
09-13-2009, 06:53 PM | #7 |
Love's to Detail
Drives: 2010 SS,97silverado/08crewcab Join Date: Oct 2008
Location: Greenville SC.
Posts: 1,421
|
The spoiler would look good if it was a better fit, too much space between
the car and it. |
09-13-2009, 07:04 PM | #8 |
MOD SQUAD
|
The Spoiler is also a prototype and unfinished. It is mounted with tape just for the show so the fit is rough. Once again cut SLP some slack.
__________________
Who cares about the Blue Oval crowd and their little Ponys? We're getting our Camaro back-and it'll be Supercharged!-MDAII Team LS3 |
09-13-2009, 07:08 PM | #9 |
Oldbie that nobody knows
|
The size and width of the spoiler I am absolutely in love with. It's what everyone's been waiting for - a one-piece ducktail that extends onto the quarter panels to hearken back to the 1st-gen cars. HOWEVER, that being said the only part about it I do not approve of is how much it slopes diagonally - it should only slope slightly, focusing more on going STRAIGHT up. Then again, if you look here at this side view of the SLP ZL575 spoiler...
... It slopes up the same way as this spoiler so maybe it's just a bad angle. OR, just maybe, it's possible that it's a little too tall - shortening it a half an inch or so might work wonders. The poor fitment for this prototype is definitely not helping either. Overall, I think I just need to see more pictures but either way, I think this is going to be the spoiler for me. It really is what I've been waiting for. Oh, and just in case the SLP rep that surfs this forum reads this thread, I am asking if those hockey stick stripes are going to be available as a decal package! |
09-13-2009, 07:14 PM | #10 |
Camaro➎ moderator
|
Spoiler, I need to see it properlly fitted so i can pass judgement.
The hood I'm not too sure about though. It's actually abit of a dissapointment to me. I gotta see it in person though. |
09-13-2009, 07:25 PM | #11 |
Female Muscle Car Nut!
Drives: 2010 RS/SS IOM Camaro Join Date: Jul 2009
Location: Mansfield, TX
Posts: 1,262
|
Honestly, the only thing I like about this car is the color. Sorry :(
__________________
2SS/RS Inferno Orange w/ black stripes, black/orange interior, Automatic, w/ sunroof and polished aluminum wheels
MODS: Borla "S" Type Exhaust, American Racing Headers 3" Longtubes, New Era Cold Air Intake, HP Tune, Custom Ground Camshaft, Professionally Ported Heads by Darin Morgan, Ported Throttle Body, 3000 Stall Converter, and 160 Degree Thermostat. http://www.rehermorrison.com/; http://www.darinmorgan.com/; http://www.neweraperformance.com/ |
09-13-2009, 07:45 PM | #12 |
|
that spoiler looks nice but the fitment is pure ass slp should be embarassed(edit) just went back and read its attached with tape i will take back my comments until we see the finished product
__________________
|
09-13-2009, 07:50 PM | #13 |
Yep I'm back!
Drives: 2017 Krypton Green 1SS 1LE Join Date: Mar 2009
Location: Indian Trail, NC
Posts: 2,565
|
Not feelin it either, hood looks weird badge looks weird cause of bend no way around that. Spoiler looks off a bit liked other version the did better. Don't care for wheels at all.
|
09-13-2009, 07:51 PM | #14 |
MOD SQUAD
|
The hoods you see in the pictures are two possible products. The blue hood is a clay mold and unfinished so give SLP some slack on the finished look.
The Spoiler is also a prototype and unfinished. It is mounted with tape just for the show so the fit is rough. Once again cut SLP some slack.
__________________
Who cares about the Blue Oval crowd and their little Ponys? We're getting our Camaro back-and it'll be Supercharged!-MDAII Team LS3 |
|
|
|
|