12-01-2015, 09:48 PM | #869 |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
Awesome! Thanks man!
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
03-11-2016, 08:07 AM | #870 |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
My hood is getting little care over the winter months.
Due to me adding the Hex Vents and the T3 Ports the felt liner under the hood lost half the supports to hold it in place. Well after 3 years the thing fell off and looked horrible. So i was left with no liner under the hood and if anyone has ever looked under there before, they didn't exactly paint the underside. The edges of the under hood were painted, but the center was basically all over spray and wasn't pleasant to look at the support beams. So I bought this product from ACS This is a composite (kinda like fiberglass but not) piece. We are in the process of cutting out the holes to make way for the 4 ports in the hood. Once that is completed the liner will be painted Orange to match the car and cleared!! So when you open the hood it will surely be show worthy. Should be completed within the next 2 weeks or so. Stay tuned!
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
03-11-2016, 08:10 AM | #871 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Quote:
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
03-11-2016, 08:35 AM | #872 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
About time . That will look great Tim look forward to seeing the final product.
Sent from my iPhone using Tapatalk |
03-11-2016, 08:40 AM | #873 |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
Haha, i did think of that....Might be using rivots!!!
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
03-11-2016, 08:41 AM | #874 |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
Thanks bud...ill post them up as soon as i get it back on the car!!
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
03-11-2016, 08:43 AM | #875 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Rivets are your friend. Are the front vents still holding up after placing rivets??
Sent from my iPhone using Tapatalk |
03-11-2016, 08:45 AM | #876 |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
Oh and Since Ted chimed In here
Ill report that i did get the quote for the 4th Stage to my Motor Build!!! Going with the JRE Road Race Cam Package and dropping pulley down 1 more from 3.0 to a 2.8. Shooting for fall early next spring install Currently sitting at 606whp with cutouts open, Think it was around 596ish with them closed. Should be in the 680-700 range when installed. Should be interesting to drive!!! haha
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
03-11-2016, 08:46 AM | #877 |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
Oh yea....those things haven't moved!!!
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
03-15-2016, 09:22 PM | #878 |
BMBLBLU
Drives: Aqua Blue Metallic 2010 Camaro 1ss Join Date: Jul 2010
Location: maryland
Posts: 311
|
I love this build, as you have done many things to your car and they are not over the top and really makes your car stand out among the rest of us. I really like the gauge pack that you have and will be getting that for mine as well.
Steve
__________________
|
03-15-2016, 10:32 PM | #879 | |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
Quote:
Get ahold of Carlos, he's the owner/maker of Ortiz gauges. He will hand make you a bezel. One thing tho, make sure you let him know the depth of your gauges. That way the fit perfect!!! Good Luck bud!
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
|
03-16-2016, 05:27 PM | #880 |
BMBLBLU
Drives: Aqua Blue Metallic 2010 Camaro 1ss Join Date: Jul 2010
Location: maryland
Posts: 311
|
Thank you for the advice and I will get that to him. How do you like them in comparison to the pillar of you had them before. I like these as the weight of the ones for the pillar seem to much for that design and the one I have makes the pillar fall.
Steve
__________________
|
03-16-2016, 06:35 PM | #881 |
Drives: Supercharged LLT Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,437
|
Yea mine too . I hate it makes the interior look cheap ,
|
03-17-2016, 07:47 AM | #882 |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
I didn't have a pillar pod. I went straight to this. Looks great, don't have to worry about anything falling on you, and its different. No one else has it.
I was the test dummy and first one to get this. I love it.
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
The New Jersey (and area) check-in thread | SirBrad | USA - NY / NJ / PA | 458 | 06-10-2014 06:13 AM |
The 2011+ Mustang Thread | GatorBlue371 | General Automotive + Other Cars Discussion | 11874 | 08-23-2011 12:30 PM |
2011 2SS/RS Owners Please Chime In | NYCSRTATE | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 17 | 01-13-2011 07:46 PM |
My New 2011 SIM 2SS/RS | AmeriCustom | Camaro Photos | Spyshots | Video | Media Gallery | 41 | 10-09-2010 11:55 PM |
Think about this and the Z28 5th gen | 13F20 | Camaro ZL1 Forum - ZL1 Specific Topics | 41 | 09-04-2010 12:59 AM |