WASHER BOTTLE REMOVAL PICS ADM AIR SCOOP INSTALL - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

1969to2010 · 11-06-2010, 11:18 PM

(WHEN I WENT TO TAKE OUT THE WASHER FLUID BOTTLE I COULDNT FIND ANY PICTURES ON HOW TO DO IT SO I HOPE THIS IS A HELP TO SOME PEOPLE. ) FROM OUR CLUBS SITE NY5THGEN.COM

SAFELY JACK UP CAR SET IT ON A JACK STAND THEN TAKE OF THE TIRE

TO BE CONTINUED ...........
TOOK ABOUT 45 MINUTES VERY SIMPLE

TOOK HER OUT ON THE ROAD DEFINTLEY NOTICED SOME MORE THROTTLE RESPONSE, ONCE THE AIR SCOOP COMES I WILL POST MORE INFO. IT WOULD MAKE SENSE THAT MORE AIR COMING IN WOULD HELP OUT SO I WASNT SURPRISED AT THE DIFFERENCE. WHAT THE AIR SCOOP WILL DO IS DIRECT THE AIR IN TO THE INTAKE AND SEAL UP THE AREA. WELL SEE. AIR SCOOP SHIPPED ALREADY SO BY NEXT WEEK ILL HAVE THE REST OF THE PROJECT DONE. SO FAR EASY CHEAP MOD. IN THE FUTURE ILL BE ADDING A SMALLER WASHER BOTTLE BEHIND THE COLD AIR INTAKE.

http://s6.zetaboards.com/ny5thgen/topic/8690169/1/?x=0

J-Rod6410 · 11-06-2010, 11:41 PM

I plan on doing this soon

Very nice write-up. I'm gonna keep an eye on this thread till you finish. I'd also like to see the washer bottle you add. I personally don't like the "washer bag" so a smaller bottle would be good like the one the "Injen" intake uses.

Good Job

1969to2010 · 11-06-2010, 11:47 PM

im going to use this one
http://www.verociousmotorsports.com/VIBWWBK-1-2

glad it was a help

Ject · 11-06-2010, 11:54 PM

I've been wondering what people have been using as replacements and "where"

1969to2010 · 11-07-2010, 12:03 AM

it should be here by mid week ill post the pis and info a soon as it goes in didnt dig the look of the bag

ADM PERFORMANCE · 11-07-2010, 05:27 AM

Great attention to detail.....Now just have to finish and enjoy!

1969to2010 · 11-07-2010, 06:56 AM

Andy do you have pics of what has to be cut out of the plastic by the grill? Do we cut al the way into the corner ? We were going to do it yesterday but figured we would wait so we dont cut too much out

oh and thanks for taking the time after hours to help me out I wont forget it

BackinBlackSS/RS · 11-07-2010, 07:03 AM

Nice Job!!!

ssmike · 11-07-2010, 09:25 AM

I would like to add the scoop but I'm waiting for a good solution to relocating the washer bottle. 1969to1020, please post pics of your relocated bottle! Andy, is ADM looking for a washer bottle solution? Thanks!

BowlingSS · 11-07-2010, 06:49 PM

Quote:

Originally Posted by ssmike

I would like to add the scoop but I'm waiting for a good solution to relocating the washer bottle. 1969to1020, please post pics of your relocated bottle! Andy, is ADM looking for a washer bottle solution? Thanks!

I would like a solution also.

Bill

ADM PERFORMANCE · 11-07-2010, 08:29 PM

Quote:

Originally Posted by ssmike

I would like to add the scoop but I'm waiting for a good solution to relocating the washer bottle. 1969to1020, please post pics of your relocated bottle! Andy, is ADM looking for a washer bottle solution? Thanks!

We were looking at the vibrant piece as well,probably end up with that.

Verocious Motorsports sells vibrant

RedRyder · 11-08-2010, 08:36 AM

Looking forward to seeing pics of the new tank in there

Mr_Draco · 11-08-2010, 08:57 AM

Quote:

Originally Posted by 1969to2010

Andy do you have pics of what has to be cut out of the plastic by the grill? Do we cut al the way into the corner ? We were going to do it yesterday but figured we would wait so we dont cut too much out

oh and thanks for taking the time after hours to help me out I wont forget it

They have a thread already on this.

http://www.camaro5.com/forums/showthread.php?t=90068

Thanks for the pics. I'm wanting to do this however I'm not willing to lose the washer bottle. I'm looking forward to seeing what you do.

BowlingSS · 11-08-2010, 09:00 AM

I just bought a ADM Scoop and do need a solution for a washer bottle.

Thanks.
Bill

11-06-2010, 11:18 PM	#1
1969to2010 The Man in Black Drives: 1969 Camaro 2010 Camaro 1SS Join Date: Apr 2009 Location: Long Island NY Posts: 2,016	WASHER BOTTLE REMOVAL PICS ADM AIR SCOOP INSTALL (WHEN I WENT TO TAKE OUT THE WASHER FLUID BOTTLE I COULDNT FIND ANY PICTURES ON HOW TO DO IT SO I HOPE THIS IS A HELP TO SOME PEOPLE. ) FROM OUR CLUBS SITE NY5THGEN.COM SAFELY JACK UP CAR SET IT ON A JACK STAND THEN TAKE OF THE TIRE TO BE CONTINUED ........... TOOK ABOUT 45 MINUTES VERY SIMPLE TOOK HER OUT ON THE ROAD DEFINTLEY NOTICED SOME MORE THROTTLE RESPONSE, ONCE THE AIR SCOOP COMES I WILL POST MORE INFO. IT WOULD MAKE SENSE THAT MORE AIR COMING IN WOULD HELP OUT SO I WASNT SURPRISED AT THE DIFFERENCE. WHAT THE AIR SCOOP WILL DO IS DIRECT THE AIR IN TO THE INTAKE AND SEAL UP THE AREA. WELL SEE. AIR SCOOP SHIPPED ALREADY SO BY NEXT WEEK ILL HAVE THE REST OF THE PROJECT DONE. SO FAR EASY CHEAP MOD. IN THE FUTURE ILL BE ADDING A SMALLER WASHER BOTTLE BEHIND THE COLD AIR INTAKE. http://s6.zetaboards.com/ny5thgen/topic/8690169/1/?x=0 __________________ Last edited by 1969to2010; 11-06-2010 at 11:50 PM.

11-06-2010, 11:41 PM	#2
J-Rod6410 M6 9 second club Drives: A 4000 Lb BeaSSt Join Date: Jul 2009 Location: Crackin Azz on a hi-way near you Posts: 1,033 View My Garage	I plan on doing this soon Very nice write-up. I'm gonna keep an eye on this thread till you finish. I'd also like to see the washer bottle you add. I personally don't like the "washer bag" so a smaller bottle would be good like the one the "Injen" intake uses. Good Job __________________ TEAM LS3 Best pass: 9.61 @ 146 with M6 TBDRWHP TBDRWTQ ECS S/C 408, YSi, m6, Mantic Triple, ZL1 diff #BuiltByJRod.... J-Rod's Speed Shop.... Tuned by: Matt Sorian @ MS Tuning Check out my youtube channel: http://www.youtube.com/user/6410Jrod Follow me on Instagram: @J_Rod6410

11-06-2010, 11:47 PM	#3
1969to2010 The Man in Black Drives: 1969 Camaro 2010 Camaro 1SS Join Date: Apr 2009 Location: Long Island NY Posts: 2,016	im going to use this one http://www.verociousmotorsports.com/VIBWWBK-1-2 glad it was a help __________________

11-06-2010, 11:54 PM	#4
Ject aka Patrick Drives: '10 Camaro 2SS '04 Silverado Join Date: Jan 2009 Location: Derby Kansas Posts: 3,072	I've been wondering what people have been using as replacements and "where" __________________ Current Modifications: Your average Bolt-ons & Suspension Upgrades GForce Engineering: 9" Rear End, Strange Pro Iron Case w/Moser Nodular 3.70:1 Detroit locker, 3.5" Solid Drive Shaft

11-07-2010, 12:03 AM	#5
1969to2010 The Man in Black Drives: 1969 Camaro 2010 Camaro 1SS Join Date: Apr 2009 Location: Long Island NY Posts: 2,016	it should be here by mid week ill post the pis and info a soon as it goes in didnt dig the look of the bag __________________

11-07-2010, 05:27 AM	#6
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,405	Great attention to detail.....Now just have to finish and enjoy!

11-07-2010, 06:56 AM	#7
1969to2010 The Man in Black Drives: 1969 Camaro 2010 Camaro 1SS Join Date: Apr 2009 Location: Long Island NY Posts: 2,016	Andy do you have pics of what has to be cut out of the plastic by the grill? Do we cut al the way into the corner ? We were going to do it yesterday but figured we would wait so we dont cut too much out oh and thanks for taking the time after hours to help me out I wont forget it __________________

11-07-2010, 07:03 AM	#8
BackinBlackSS/RS Go Blue!!!!! Drives: 2012 Cruze LT Join Date: Mar 2009 Location: Indiana Posts: 23,290	Nice Job!!!

11-07-2010, 09:25 AM	#9
ssmike BL1ZZRD Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009 Location: Buffalo, NY Posts: 7,840	I would like to add the scoop but I'm waiting for a good solution to relocating the washer bottle. 1969to1020, please post pics of your relocated bottle! Andy, is ADM looking for a washer bottle solution? Thanks!

11-08-2010, 08:36 AM	#12
RedRyder Drives: 2010 VR 2SS/RS M6 Camaro Join Date: Feb 2010 Location: Atlanta, GA Posts: 499 View My Garage	Looking forward to seeing pics of the new tank in there

11-08-2010, 09:00 AM	#14
BowlingSS Camaro Owner Since 1987 Drives: 2011 2SS/RS L99 RJT Join Date: Jun 2006 Location: Lawrenceville, GA Posts: 2,185	I just bought a ADM Scoop and do need a solution for a washer bottle. Thanks. Bill __________________ 2011 Camaro 2SS/RS L99 RJT CAI, Inc. Cold Air Induction;ADM Scoop Rx Catch Can;Rx Breather;Roto-Fab Washer Container VMax Ported RJT Throttle Body XSPower Headers and XSPower 3" Exhaust System Elite Engineering Tunnel Brace, Gorilla Wheel Lock System; Bear Rotors, Hawk HPS Tinted Windows 35%;EFILive Tune

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K&N AirCharger and Typhoon System \| Best Prices \| Free Shipping!	JDP Motorsports	V8 Bolt-Ons & Tunes	175	09-04-2012 02:40 PM
Roto-Fab CAI Install with Pics (5 Stars)	NVMY68SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	120	05-23-2010 01:51 AM
ADM Performance Cold air intake makes 18rwhp and 18 tq over stock airbox	ADM PERFORMANCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	129	11-10-2009 07:29 PM
Calling all Vendors with CAI's - PROVE Your CAI Gains! READ	JANNETTYRACING	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	618	10-20-2009 11:39 AM