Totaled SS 1LE - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Tony-8 · 01-06-2024, 07:17 AM

I'd be interested in the Recaros too. :-)

1JEWLDSSRS · 01-06-2024, 09:17 AM

Quote:

Originally Posted by Caveman_SS

I'll have to go over there and check out what all is even salvageable on it. I haven't seen it yet. Yeah, I'd be glad to help some people out on here if I can. What I can probably do is add his Facebook Marketplace link in here if that's how he lists it for parting out. Do you know if the 1LE steering wheel will swap into my car? The buttons look to be pretty much the same on it.

Gotcha. How do you even remove those from the car?

Not too sure about the steering wheel. I do know that the pinning is different from the 2SS and the 1SS, not sure about the SS/LE's..

Bluebagger06 · 01-06-2024, 01:25 PM

[/QUOTE]Gotcha. How do you even remove those from the car?[/QUOTE]

They just pop out, just use a little pick.

1JEWLDSSRS · 01-06-2024, 03:20 PM

Gotcha. How do you even remove those from the car?[/QUOTE]

They just pop out, just use a little pick.[/QUOTE]

Yep. Start at both ends as that it where it "clips" down, then the rest of it you pull up and out. You have 3 pcs, 2 end clips, and the main strip molding..

CamaroCracka · 01-07-2024, 06:21 AM

Quote:

Originally Posted by Eddymel1998

Honestly if damage was in the front I'd say just swap the whole rear cradle, get all the suspension and diff stuff in one package with a neat little bow, although I know nothing about the whole driveshaft situation and if that will bolt up fine.

If you swap the cradle, which would be a great upgrade, be sure to get the front sway bar and end links too if they are not damaged. If they are damaged, plan on getting a bigger bar for the front because that 28mm solid bar in the rear with the stock 24mm hollow bar in the front might put give your car a tendency to oversteer. No issue with the driveshaft going to a 1LE diff. You will need to have your tune calibrated for that 3.91 gear, but that is a small price to pay for the increased grin factor.

Caveman_SS · 01-30-2024, 03:48 PM

Hey guys! He finally listed it for part out on FB Marketplace. Here is the link: https://www.facebook.com/marketplace...4548519497814/

Message away!

01-06-2024, 07:17 AM	#15
Tony-8 Drives: 2014 Camaro RRM 2SS RS, M6 LS3 Vert Join Date: Aug 2015 Location: New Hampshire Posts: 234	I'd be interested in the Recaros too. :-) __________________ Dream it - drive it!

01-06-2024, 01:25 PM	#17
Bluebagger06 Drives: 2012 camaro ss Join Date: Sep 2018 Location: Illinois Posts: 441	[/QUOTE]Gotcha. How do you even remove those from the car?[/QUOTE] They just pop out, just use a little pick. __________________ GPI Powered

01-06-2024, 03:20 PM	#18
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,442	Gotcha. How do you even remove those from the car?[/QUOTE] They just pop out, just use a little pick.[/QUOTE] Yep. Start at both ends as that it where it "clips" down, then the rest of it you pull up and out. You have 3 pcs, 2 end clips, and the main strip molding.. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

01-30-2024, 03:48 PM	#20
Caveman_SS Will Cave Drives: 2010 Victory Red 2SS LS3 Join Date: May 2023 Location: North Carolina Posts: 118	Hey guys! He finally listed it for part out on FB Marketplace. Here is the link: https://www.facebook.com/marketplace...4548519497814/ Message away!