02-10-2009, 07:24 PM | #1 |
aka Patrick
|
2 Tone Photoshop Request
First time requester so I apologize if I give bad picture examples or a poor description.
The color that I ordered is Cyber Gray Metallic and I was wanting to do a 2 Tone sort of.. I want the top half to be Cyber Gray Metallic.. middle section Blue.. then the very bottom (like ground effects) the Cyber gray. Then have some sort of Cyber Gray Metallic jagged brush marks in the blue area. Example of color locations (minus the orange stripe): Example of Jagged Brush Marks: Any thing would be very helpful!
__________________
Current Modifications: Your average Bolt-ons & Suspension Upgrades
GForce Engineering: 9" Rear End, Strange Pro Iron Case w/Moser Nodular 3.70:1 Detroit locker, 3.5" Solid Drive Shaft |
02-10-2009, 07:41 PM | #2 |
Drives: 95 civic Join Date: Apr 2008
Location: Chicago Illinois
Posts: 5,796
|
cant wait to see the finsished photo shop
My two tone will be my sig pic minus the orange stripe
__________________
|
02-10-2009, 09:48 PM | #3 |
Drives: 69 Convertible Camaro Join Date: Sep 2008
Location: Sumit Point, WV
Posts: 943
|
Pacecar
How about a camaro pacecar that uses all ten colors in the paint scheme. if you look a the door it almost does, just a thought.
|
02-11-2009, 05:29 AM | #4 |
aka Patrick
|
i'd have to pass on the pace car thing...
just trying to show a guy visually what i've been explaining to him since he'll most likely be painting the car for me.
__________________
Current Modifications: Your average Bolt-ons & Suspension Upgrades
GForce Engineering: 9" Rear End, Strange Pro Iron Case w/Moser Nodular 3.70:1 Detroit locker, 3.5" Solid Drive Shaft |
02-12-2009, 07:20 PM | #5 |
Moderator.ca
|
proper netiquette is 24 hrs minimum between thread bumps.
__________________
Note, if I've gotten any facts wrong in the above, just ignore any points I made with them
__________________ Originally Posted by FbodFather My sister's dentist's brother's cousin's housekeeper's dog-breeder's nephew sells coffee filters to the company that provides coffee to General Motors...... ........and HE WOULD KNOW!!!!__________________ Camaro Fest sub-forum |
02-14-2009, 10:27 AM | #6 |
aka Patrick
|
__________________
Current Modifications: Your average Bolt-ons & Suspension Upgrades
GForce Engineering: 9" Rear End, Strange Pro Iron Case w/Moser Nodular 3.70:1 Detroit locker, 3.5" Solid Drive Shaft |
02-15-2009, 09:06 PM | #7 |
aka Patrick
|
__________________
Current Modifications: Your average Bolt-ons & Suspension Upgrades
GForce Engineering: 9" Rear End, Strange Pro Iron Case w/Moser Nodular 3.70:1 Detroit locker, 3.5" Solid Drive Shaft |
02-16-2009, 05:41 AM | #8 |
Rider of the short BUS
Drives: Ukon/F350(work)/Intruder800 Join Date: Dec 2008
Location: London, KY
Posts: 268
|
Well while i'm just a rookie at this photoshop stuff here is what I think you wanted. I did borrow the image of the 2 tone car and made some changes.
__________________
SIM with CGM rallies
|
02-16-2009, 01:35 PM | #9 |
Drives: :) Join Date: Jan 2009
Location: Illinois
Posts: 98
|
Here's one for ya.
|
02-16-2009, 04:15 PM | #10 |
aka Patrick
|
Ahh, thank you much to both of you!!
__________________
Current Modifications: Your average Bolt-ons & Suspension Upgrades
GForce Engineering: 9" Rear End, Strange Pro Iron Case w/Moser Nodular 3.70:1 Detroit locker, 3.5" Solid Drive Shaft |
02-16-2009, 05:53 PM | #11 |
Rider of the short BUS
Drives: Ukon/F350(work)/Intruder800 Join Date: Dec 2008
Location: London, KY
Posts: 268
|
I likey that one phantomex nice
__________________
SIM with CGM rallies
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2 tone photoshop please | drivingincamaro | Camaro Photoshops / Renderings Forum | 14 | 02-28-2013 09:20 PM |
Changing Photoshop Thread Format | headpunter | Site Related Announcements / Suggestions / Feedback / Questions | 20 | 11-06-2008 05:40 PM |
Photoshop request | Mr. Wyndham | Camaro Photos | Spyshots | Video | Media Gallery | 4 | 03-20-2007 10:46 AM |