11-04-2015, 04:06 PM | #1 |
Drives: VR 2012 RS Join Date: Feb 2014
Location: US
Posts: 97
|
ZL1 REAR rock guards
I need major HELP just bought these but had no idea there is more to installing these then just placement, any DIY videos out there or any help would be appreciated. Looking to get these on asap, Thanks in advance
|
11-04-2015, 04:14 PM | #2 |
Hotwheels
|
Pull the couple screws off the inner wheel well at the rear
It should fit right behind it.. You will have 2 spots for rivets as well.. No drilling Sent from my SM-G920V using Tapatalk
__________________
|
11-04-2015, 04:41 PM | #3 |
Obsessed
Drives: 2016 Hyper Blue 2SS RS Join Date: Jun 2011
Location: Riverview, FL
Posts: 2,603
|
Really have to look at it, sandwiches in between the black plastic and the inside of the rear area. see if this helps.
http://www.camaro5.com/forums/showthread.php?t=284946
__________________
2016 Hyper Blue 2SS |
11-04-2015, 07:03 PM | #4 |
SoCal Camaro5 Race Team
Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010
Location: SO CAL
Posts: 14,288
|
I did these. Instructions on web at the vendor site also or should be. There is two sided tape on the guards, be sure to place the part as far back as you can so it fits up against the rear fender edge before you stick in place.
|
11-11-2015, 02:08 PM | #5 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Do you kind me asking how much you paid. I have a set that I am needing to sell and not sure of good asking price
Sent from my iPhone using Tapatalk |
|
|
|
|